Telluride

These are the Traxxas Slash 4X4 Progressive Shock Springs: Rear, -20% Rate, Orange (2) Pair of XX-long progressive-rate springs are custom-wound to provide responsive control over small bumps, with a progressively stiffer rate to absorb hard landings...

This is the Traxxas Body Reamer Cap The Traxxas body reamer is a finely-honed cutting instrument. Protect your reamer's cutting surface with this replacement aluminum cap.

This is the Traxxas Red 6061-T6 Aluminum Center Driveshaft for Stampede 4x4 and Telluride trucks. Accessory Part ForStampede 4x4 Brushed XL-5Stampede 4x4 VXLStampede 4x4 XL-5TellurideNote: Trucks must be equipped with splined drive hubs that slide into...

This is the Traxxas Green 6061-T6 Aluminum Center Driveshaft for Stampede 4x4 and Telluride trucks. Accessory Part ForStampede 4x4 Brushed XL-5Stampede 4x4 VXLStampede 4x4 XL-5TellurideNote: Trucks must be equipped with splined drive hubs that slide into...

This is a set of Traxxas Red Aluminum 4mm Flanged Serrated Nuts (4).  These are used as wheel nuts and lock nuts on many Traxxas models. Accessory part forDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.01/16 E-Revo VXL1/16 E-Revo1/16...

This is the Traxxas Telemetry Expander and GPS Module 2.0 Combo Set.  Upgrade your Traxxas vehicle with this set for precision telemetry data with easy setup. This set must be used with Traxxas TQi radio systems and the #6533 TSM receiver. Expanded...

This is the Traxxas Telemetry GPS Module 2.0.  For real-time, ultra-precise speed data, the GPS Module 2.0 is the answer. Real-Time SpeedStandard telemetry sensors use your vehicle’s gear ratio and tire size to calculate speed based on RPM...

This is the Traxxas Telemetry Expander 2.0.  Compatible with TQi transmitters and vehicles equipped with a 6533 TSM receiver, the Telemetry Expander 2.0 is a the best option for advanced data communication. Expanded InnovationTraxxas telemetry...

This is the Traxxas Complete High-Output BEC Assembly. A BEC helps provide more power to prevent receiver "brown-outs" when using more demanding servos. Accessory part forToyota GR Supra GT44-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit...

These are the GPM Racing Red Aluminum 25mm Extension Hubs with 12mm Hex for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rustler 4x4, and other trucks listed below. This is a full set of four extensions. Made of 6061-T6 aluminum, these are a great option to...

These are the GPM Racing Gunmetal Aluminum 25mm Extension Hubs with 12mm Hex for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rustler 4x4, and other trucks listed below. This is a full set of four extensions. Made of 6061-T6 aluminum, these are a great option...

This is the GPM Racing Blue Aluminum Front Shock Tower for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rally, and Telluride vehicles. Made of 6061-T6 aluminum, these look awesome and improve the strength of your car or truck. Full mounting hardware is...

These are the GPM Racing Gunmetal Aluminum Rear Stub Axle Carriers for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, 1/10 Rally, Telluride, and others (see below). Made of 6061-T6 aluminum and anodized for a spectacular finish, these are a great...

These are the GPM Racing Gunmetal Aluminum Front Caster Blocks for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, Rally, and XO-1 vehicles. Made of 6061-T6 aluminum and anodized for a spectacular finish, these feature bearing-supported kingpins for...

These are the Traxxas White Front Springs (2) for Long Ultra Shocks found on vehicles like the Stampede, Craniac, Skully, Bigfoot, and other trucks based on the Stampede chassis. Replacement Part ForHoss 4X4 VXLStampede 4X4 VXLStampede 4X4Stampede...

This is the Hot Racing Hardened Steel 75-Tooth 48-Pitch Spur Gear for Traxxas Slash 2WD, Stampede 2WD, Rustler, Bandit, and Telluride vehicles. It will work on XL-5 brushed and VXL brushless vehicles with proper adjustment.FEATURES:- CNC machined and...

This is the Hot Racing Hardened Steel 74-Tooth 48-Pitch Spur Gear for Traxxas Slash 2WD, Stampede 2WD, Rustler, Bandit, and Telluride vehicles. It will work on XL-5 brushed and VXL brushless setups with proper gearing. Due to the gear being a smaller...

This is the Hot Racing Steel 49-Tooth 0.8 Mod 32-Pitch Center Differential Spur Gear for Slash 4x4, Stampede 4x4, 1/10 Rally VXL, and Telluride trucks equipped with a center diff. The vehicle must have the center gear differential installed, as this gear...

These are Hot Racing Rear Spring Sets (3 Pairs) for Traxxas Slash 2WD, Slash 4x4, Stampede 2WD, Stampede 4x4, Telluride, and Rustler XL-5 and VXL trucks. These fit the stock Traxxas Ultra Shocks used on these vehicles.FEATURESSpring Steel...

These are the Hot Racing Rear Progressive 2 Spring Sets (3 Pairs) for Traxxas Slash 2WD, Slash 4x4, Stampede 2WD, Stampede 4x4, Telluride, and Rustler XL-5 and VXL trucks. These fit the stock Traxxas Ultra Shocks used on these vehicles. FEATURES:Steel...

These are the Hot Racing Front Progressive Rally Spec Springs (3 Pairs) for Traxxas Slash 2WD, Slash 4x4, Stampede 2WD, Stampede 4x4, 1/10 Rally VXL, Telluride, and Rustler XL-5 and VXL trucks. These fit the stock Traxxas Ultra Shocks used on these...

These are the Hot Racing Front Spring Sets (3 Pairs) for Traxxas Slash 2WD, Slash 4x4, Stampede 2WD, Stampede 4x4, Telluride, and Rustler XL-5 and VXL trucks. These fit the stock Traxxas Ultra Shocks used on these vehicles. FEATURES:Spring Steel...

These are the Hot Racing Front Progressive 2 Spring Sets (3 Pairs) for Traxxas Slash 2WD, Slash 4x4, Stampede 2WD, Stampede 4x4, Telluride, and Rustler XL-5 and VXL trucks. These fit the stock Traxxas Ultra Shocks used on these vehicles.FEATURES:Steel...

This is the Hot Racing Black Aluminum 1.5-Degree Rear Hubs / Stub Axle Carriers for Slash 4x4, Stampede 4x4, 1/10 Rally VXL, Telluride, Nitro Rustler, Nitro Slash, Nitro Sport, and Nitro Stampede.FEATURES:- CNC machined aluminum construction- Anodized...

This is the Hot Racing Aluminum Center One-Way Differential for Traxxas Slash 4X4, Stampede 4X4, Rally VXL, and Telluride 4X4 vehicles equipped with the center gear differential.The Hot Racing center one-way differential drives the front and rear wheels...

This is the Hot Racing Aluminum 10mm Offset 17mm Hex Hubs for the Traxxas Rally VXL, Slash 4X4, Stampede 4x4, and Telluride 4X4 vehicles. Offset from stock wheel hex is +16mm per side. FEATURES:- Black anodized CNC machined aluminum hex adapter- Blue...

These are the Hot Racing Aluminum 12mm Hex Hubs with 25mm Extension for Traxxas Slash 4X4, Stampede 4X4, and 1/10 Rally VXL vehicles with 5mm diameter outer stub axles.FEATURES:- Extends the width of your buggy or truck for a wider stance and greater...

These are the Hot Racing Aluminum 12mm Hex Hubs with 28mm Extension for Traxxas Slash 4X4, Stampede 4X4, and 1/10 Rally VXL vehicles with 5mm diameter outer stub axles.FEATURES:- Extends the width of your truck for a wider stance and greater control-...

This is the Hot Racing 30-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:CNC Machined light weight Precision Gears with Standard 4140 steelReduce internal rotating mass...

This is the Hot Racing 29-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:Standard 4140 steel and heat treatedHeavy duty 4mm set screw for brushless powerReduced...

This is the Traxxas Wires, sway bar (front & rear, hard & soft) / 3x6 FCS (4). This is Traxxas part number 6896Part Number: 6896 / TRA6896Fits1/10 RallySlash 4x4 (low-CG)Slash 4x4 (standard chassis)Slash 4x4 PlatinumSlash 4x4 UltimateStampede 4x4...

This is the Traxxas BFGoodrich Mud-Terrain Tires on SCT Chrome Green Beadlock Wheels for 4WD F/R, 2WD Rear Pair of BFGoodrich Mud-Terrain T/A KM2 tires come pre-glued and mounted with foam inserts to chrome SCT wheels with green beadlock-style trim...

This is the Traxxas Wheels, SCT Split-Spoke, chrome, red beadlock style, dual profile (2.2' outer, 3.0' inner) (4WD front/rear, 2WD rear) (2). This is Traxxas part number 6872APart Number: 6872A / TRA6872AFitsNitro SlashSlash 2WDSlash 2WD Ford...

This is the Traxxas Tires, BFGoodrich Mud-Terrain T/A KM2 , ultra-soft (S1 off-road racing compound) (dual profile 4.3x1.7- 2.2/3.0'). This is Traxxas part number 6871RPart Number: 6871R / TRA6871RFitsNitro SlashSlash 2WDSlash 2WD Ford RaptorSlash 2WD...

This is the Traxxas Tires, BFGoodrich Mud-Terrain T/A KM2 (dual profile 4.3x1.7- 2.2/3.0') (2)/ foam inserts (2). This is Traxxas part number 6871Part Number: 6871 / TRA6871FitsNitro SlashSlash 2WDSlash 2WD Ford RaptorSlash 2WD VXLSlash 2WD VXL (low...

This is the Traxxas Steering blocks, 6061-T6 aluminum, left & right (red-anodized). Traxxas aluminum steering blocks combine total steering accuracy with bulletproof strength. Machined from solid 6061-T6 aluminum and protected with a brilliant...

This is the Traxxas Gear clutch, complete (high stall).High-stall clutch comes complete and ready to installReplacement Part ForFord Fiesta ST Rally (74064-4)Ford Fiesta ST Rally (74054-4)Telluride

This is the Traxxas Driveshaft assembly, rear, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1). This is Traxxas part number 6761Part Number: 6761 / TRA6761FitsTellurideMore detail coming soon! Please check your vehicle...

This is the Traxxas Driveshaft assembly, front, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1). This is Traxxas part number 6760Part Number: 6760 / TRA6760FitsTellurideMore detail coming soon! Please check your vehicle...

This is the Traxxas Half shafts, heavy duty (external splined (2)/ internal splined (2))/ metal u-joints (4). This is Traxxas part number 6759Part Number: 6759 / TRA6759FitsTellurideMore detail coming soon! Please check your vehicle manual to confirm...