Telluride

This is the GPM Racing Red Aluminum Adjustable 25T Spline Locking Servo Horn for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rustler 4x4, and 1/10 Rally vehicles. Made of 6061-T6 aluminum, these are...

This is the GPM Racing Orange Aluminum Adjustable 25T Spline Locking Servo Horn for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rustler 4x4, and 1/10 Rally vehicles. Made of 6061-T6 aluminum, these are...

This is the Traxxas Motor Plate 6061-T6 Aluminum (Blue-Anodized) Machined from solid 6061-T6 aluminum, this motor plate offers rock-solid mounting security for major horsepower applications...

This is the Traxxas Sealed Waterproof Receiver Box with Hardware.  Sealed receiver box for Traxxas micro receivers.IncludesOne Receiver BoxOne Rubber SealFoam PaddingTwo 2.5x8mm Cap Head ScrewsTwo...

These are the Traxxas XX-Long Chrome Steel Shock Shafts. Each package includes two shock shafts. Replacement steel shock shafts with chrome finish for Traxxas long Ultra Shocks (2) Replacement Part...

These are Traxxas 4mm Stainless Locking Nuts. These will fit many different Traxxas vehicles, and are a great item to keep in your toolbox.Features:Stainless steel construction.Nylon insert...

These are the GPM Orange Aluminum Front Steering Blocks for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, Rally, and Telluride vehicles. These are made of 6061-T6 aluminum and anodized for a...

These are the Traxxas Green Front Springs (2) for Long Ultra Shocks found on vehicles like the Stampede, Craniac, Skully, Bigfoot, and other trucks based on the Stampede chassis.Accessory Part...

This is the Traxxas Gear set, center differential (output gears (2)/ spider gears (2)/ spider gear shaft). This is Traxxas part number 6883Part Number: 6883 / TRA6883Fits1/10 RallySlash 4x4...

This is the Traxxas Wheels, SCT Split-Spoke, satin chrome, black beadlock style, dual profile (2.2' outer, 3.0' inner) (4WD front/rear, 2WD rear only) (2). This is Traxxas part number 6872Part...

This is the Traxxas Receiver Box Seal Kit with O-ring, Seals, and Silicone Grease. This is for use on with the 3628 waterproof receiver box. Refresh your 3628 sealed receiver box with this seal kit...

This is the Front Bulkhead for the Traxxas Slash 4x4. FEATURES Hardened plastic construction

This is the Traxxas Center Differential Housing for the Slash 4x4 and 1/10 Rally vehicles equipped with a center differential. It's a direct replacement for the Slash 4x4 Platinum, and also works on...

This is the 19-Tooth Pinion Gear (48-Pitch) 3 mm Bore 19-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your...

This is the Traxxas 5x11x4mm Ball Bearing Set.  This includes eight ball bearings.  These are used in many of the Traxxas vehicles. FeaturesMade o

This is the Traxxas Springs, front (white) (progressive rate) (2). Pair of long progressive-rate springs are custom-wound to provide responsive control over small bumps, with a progressively stiffer...

These are the GPM Racing Orange Aluminum 25mm Extension Hubs with 12mm Hex for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rustler 4x4, and other trucks listed below. This is a full set of four extensions...

These are the Hot Racing Black Aluminum C-Hub Castor Blocks for the 1/10 Traxxas Rally VXL, Slash 4X4, Stampede 4X4, and Telluride 4X4.FEATURES:- CNC machined 6061-T6 aluminum, anodized black- Brass...

This is the stock replacement Rear Bulkhead for the Traxxas Slash 4x4. FEATURES Hardened plastic construction Black in c

This is the Traxxas Hardened Steel Front Center Drive Hub and Screw Pin for 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, Rally, and XO-1 vehicles. The replacement hardened-steel drive hub connects your...

These are the Traxxas Slash 4X4 Progressive Shock Springs: Rear, -10% Rate, Green (2) Pair of XX-long progressive-rate springs are custom-wound to provide responsive control over small bumps, with a...

These are the Traxxas Slash 4X4 Progressive Shock Springs: Front, -10% Rate, Green (2). Features

These are the Steering Blocks for the Traxxas Slash 4x4. Replacement part forFord Fiesta ST RallyHoss 4X4 VXLRustler 4X4 VXLRustler 4X4Slash 4X4 VXLSlash 4X4Stampede 4X4 VXLStampede 4X4 Accessory...

This is a Traxxas Jato 2.5 and 3.3 Aluminum Slipper Pressure Plate and Hub.

This is the Traxxas Springs, rear (white) (progressive rate) (2). Pair of XX-long progressive-rate springs are custom-wound to provide responsive control over small bumps, with a progressively...

This is the Traxxas Black Antenna Tube with Cap and Wire Retainer.  These are compatible with nearly all Traxxas cars, trucks and boats.  The sleek black design looks great as well.

These are the GPM Racing Black Aluminum Front Caster Blocks for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, Rally, and XO-1 vehicles. Made of 6061-T6 aluminum and anodized for a spectacular...

These are the Traxxas Blue Front Springs (2) for Long Ultra Shocks found on vehicles like the Stampede, Craniac, Skully, Bigfoot, and other trucks based on the Stampede chassis. Accessory Part...

This is the Hot Racing 31-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:CNC Machined light weight Precision...

This is the Traxxas Tires & wheels, assembled, glued (S1 ultra-soft off-road racing compound) (SCT Split-Spoke satin chrome, black beadlock style wheels, BFG Mud-Terrain tires, foam inserts) (2) (4WD...

This is the Traxxas Tires, Kumho (dual profile 4.3x1.7- 2.2/3.0') (2)/ foam inserts (2).Replica 4.3″ x 1.7″ Kumho tires are designed for SCT wheels with a dual profile outer 2.2″ diameter and 3.0″...

This is the Traxxas Bulkhead tie bars, front & rear, aluminum (blue-anodized). Set of front and rear bulkhead tie bars with a brilliant blue anodized finishReplacement part forFord Fiesta ST...

This is the Traxxas Tires & wheels, assembled, glued (SCT black, orange beadlock wheels, dual profile (2.2' outer, 3.0' inner), SCT off-road racing tire, foam inserts) (2) (4WD f/r, 2WD rear) (TSM...

These are the Traxxas Slash 4X4 Progressive Shock Springs: Front, +20% Rate, Blue (2). The Slash 4X4's fully adjustable suspension gives it an edge in any race, and with Traxxas progressive-rate...

This is Traxxas Rod Ends Short Hollow Balls Set of six short rod ends with hollow ball connectors Replacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBIGFOOT No. 1...

This is a Traxxas Jato 2.5 and 3.3 Shim Set.  This includes four silver metal hollow balls and four 3mm silver washers.  These are for adjusting the roll center of the truck.

These are the GPM Racing Black Aluminum 25mm Extension Hubs with 12mm Hex for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rustler 4x4, and other trucks listed below. This is a full set of four extensions...

These are the GPM Racing Red Aluminum 17mm Extension Hubs with 12mm Hex for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rustler 4x4, and other trucks listed below. This is a full set of four extensions. ...

These are the GPM Racing Black Aluminum Rear Stub Axle Carriers for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, 1/10 Rally, Telluride, and others (see below). Made of 6061-T6 aluminum and...

This is the Hot Racing Aluminum 6mm Offset 17mm Hex Hubs for the Traxxas 1/10 Rally VXL, Slash 4X4, Stampede 4x4, and Telluride 4X4 vehicles. Offset from stock wheel hex is +12mm per side.FEATURES:-...