Jato 4x4

This Combo Includes:Traxxas Jato 4X4 BL-2s Racing BuggyEZ-Peak ID LiPo Charger7.4V 2S 5800mAh LiPo Battery This is the Traxxas Jato 4X4 Brushless Ready-to-Run Waterproof Radio Controlled 1/8 Scale Racing Buggy with Factory-Installed Extreme HD Kit, with...

This is the Traxxas Jato 4X4 Brushless Ready-to-Run Waterproof Radio Controlled 1/8 Scale Racing Buggy with Factory-Installed Extreme HD Kit, with TQ 2.4 GHz 2-Channel Radio System, BL-2s Speed Control, and Clipless Painted Body. Battery and charger are...

This is the Traxxas Tool Set with Carrying Case. This is the must-have set for all Traxxas owners. It comes with a six Allen/Hex drivers, five nut drivers, three Phillips head screwdrivers, three flat-head screw drivers, and an dual-end open-ended...

This is Silicone grease that is used throughout most all of the Traxxas kits, it can also be used in most any R/C greasing application.  (1- tube of grease approximately 1 oz.)

This is the Traxxas Battery hold-down, tall (1)/ hold-down retainer, front & rear (1 each) (allows for installation of taller, multi-cell batteries)Extended battery hold-down with front and rear retainers accommodates taller batteries on vehicles...

This is the Diff Carrier/Gasket Set Replacement differential carrier includes X-ring gaskets (2), ring gear gasket, and 6x10x0.5 mm washer. FEATURES:Plastic Diff CarrierBlue Rubber Shaft GasketsBlack Rubber Diff Carrier GasketsGray Teflon...

This is the Diff Oil Kit for the Revo by Traxxas. Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential by using higher or lower viscosity oil. Depending on the track conditions,...

This is the Traxxas Alloy Slipper Pressure Plate and Hub for the Revo 2.5, 3.3, E-Revo, E-Revo Brushless, E-Maxx 16.8V, and E-Maxx Brushless trucks. These are part of the slipper assembly.

This is the Traxxas Rear Center Drive Hub and Set Screw for 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, Rally, Telluride, and XO-1 vehicles. Rear center drive hub with 4x3 mm grub screw.

This is a Tube of White Lithium Grease from Traxxas. This product can be used to lubricate parts, such as gears. FEATURES Great lubrication for nylon gears INCLUDESOne tube of lithium grease (volume unknown) REQUIRESApplication to parts needing...

This is the Traxxas Front 37T Differential Ring and 13T Pinion Gear 37-tooth ring and 13-tooth pinion gears for front differentials. Replacement Part ForFord Fiesta ST RallyFord F-150 Raptor R 4X4Ford Fiesta ST Rally BrushlessFord Fiesta ST RallyHoss 4X4...

This is the Traxxas Differential ring gear, pinion gear, (machined spiral cut) (rear) Spiral-cut 37-tooth ring and 13-tooth pinion differential gear sets are CNC-machined from a solid block of steel. The teeth are cut with a slight curve to minimize...

This is a set of four Traxxas 17mm Splined Serrated red-aluminum Wheel Nuts for use on the X-Maxx and E-Revo 2.0 monster trucks. Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug no matter how intense the action gets...

This is the Traxxas Cover, gear (clear) The crystal-clear plastic gear cover is just as durable as the stock cover, but lets you see the gear mesh for easy, no-tool inspection. Also an accessory for showing off the optional 6860R aluminum motor mount...

This is a package of six 3x6mm Traxxas Button Head Screws. Features: Steel construction Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a 3x6mm button head screw is required Includes: Six...

This is the Traxxas Velineon VXL-4s Brushless Electronic Waterproof Speed Control - (Fwd/Rev/Brake) The 3440 Velineon 4s brushless power system takes your RC experience to the extreme. New High-Resolution Linear Braking provides the most intuitive and...

This is a set of four Traxxas 17mm Splined Serrated orange-aluminum Wheel Nuts for use on the X-Maxx and E-Revo 2.0 monster trucks. Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug no matter how intense the action...

This is the Traxxas Differential, rear (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash, Stampede, Rustler) (13/37 ratio)The Pro-BUILT 4X4 rear differential comes professionally assembled for easy...

This is the Traxxas Differential, front (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash, Stampede, Rustler) (13/37 ratio)The Pro-BUILT 4X4 front differential comes professionally assembled for easy...

This is the Traxxas Complete Transmission for 1/10 2WD Rustler, Bandit, Stampede, and Slash trucks.  This comes pre-assembled with internal gears, slipper clutch, and spur gears, making for an ultra-simply swap to get you back out racing or bashing...

This is the Traxxas Velineon 540XL Brushless 2400Kv 70mm Motor (Assembled with 6.5mm Gold-Plated Bullet Connectors) (Not for use in Marine Models) The Velineon 540XL brushless motor delivers massive torque with brushless efficiency. Motor comes equipped...

This is the Traxxas Rear Ring and Pinion Differential Gears for the Slash 4x4, Hoss 4x4, Stampede 4x4, Telluride, 1/10 Rally, and XO-1 vehicles. 37-tooth ring and 13-tooth pinion gears for rear differentials Includes:One Rear Differential Ring GearOne...

This is the Traxxas Differential Gear Set for the Slash 4x4, Stampede 4x4, 1/10 Rally, XO-1, and Telluride vehicles. These feature hardened steel construction.INCLUDES:Two Output GearsTwo Spider GearsOne Spider Gear ShaftOne Carrier Support Replacement...

This is the Traxxas Center Driveshaft 6061-T6 aluminum (blue-anodized) (214mm) Traxxas designed this one-piece driveshaft out of tough 6061-T6 aluminum to be both strong and lightweight. Internal splines fit directly onto the input shafts of the front...

This is the Traxxas Machined Spiral Cut Front Differential Ring and Pinion Gear. These are used as an upgrade over the 5379X gears found in many vehicles. Spiral-cut 37-tooth ring and 13-tooth pinion front differential gear sets are CNC-machined from a...

These are the 3x6mm Flathead Machine Screws from Traxxas.FeaturesSteel constructionBlack in colorIncludesSix 3x6mm Flathead Machine ScrewsSpecificationsLength: 6mmDiameter: 3mm

Traxxas Splined 17mm Wheel Nuts (blue-anodized) (4) This set of four 17 mm blue aluminum wheel nuts is beautiful anodized for eye-catching looks with Traxxas-tough durability.

This is the Traxxas Sway Bar Kit (Front and Rear) with Adjustable Linkage Sway bars are a powerful tool to change up the handling of your Jato 4X4. Sway bars allow you to dial in more or less understeer depending on the type of terrain and the level of...

This is the Front Differential Housing for the Traxxas Slash 4x4. FEATURES Hardened plastic construction Black in color INCLUDESTwo front differential housing halves REQUIRESInstallation around assembled differential components

This is the RC Screwz Traxxas Jato 4X4 BL-2S (90154-4) Rubber Shielded Bearing Kit. Protect your off-road monster from dirt, dust, mud and grime with this high-quality rubber shielded bearing kit. Rubber Shielded Bearing Kit Features: High Quality...

This is the RC Screwz Traxxas Jato 4X4 VXL (90386-4) Rubber Shielded Bearing Kit. Protect your off-road monster from dirt, dust, mud and grime with this high-quality rubber shielded bearing kit. Rubber Shielded Bearing Kit Features: High Quality Rubber...

This is the RC Screwz Traxxas Jato 4X4 VXL (90386-4) Stainless Steel Screw Kit. RCScrewZ Stainless Screw Kits are the best way to beef up the hardware throughout your RC vehicle in one convenient package. Your new kit will include everything needed to do...

This is the RC Screwz Traxxas Jato 4X4 BL-2S (90154-4) Stainless Steel Screw Kit. RCScrewZ Stainless Screw Kits are the best way to beef up the hardware throughout your RC vehicle in one convenient package. Your new kit will include everything needed to...

This is the Traxxas Hardened Steel Front Center Drive Hub and Screw Pin for 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, Rally, and XO-1 vehicles. The replacement hardened-steel drive hub connects your front differential to the aluminum center driveshaft...

This is the Traxxas Complete Metal Center Differential Upgrade Kit with Steel 54-Tooth Spur Gear for Rustler 4x4, Slash 4x4, and Stampede 4x4 trucks.  This beefed up center diff setup is a must for higher power applications. Replace your Traxxas...

This is a set of four Traxxas 17mm Splined Serrated Green Aluminum Wheel Nuts for use on the X-Maxx and E-Revo 2.0 monster trucks. Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug no matter how intense the action...

This is a set of Traxxas Rear Differential Housings for the Slash 4x4, Stampede 4x4, 1/10 Rally, Telluride, and the XO-1 carsIncludes: Two rear differential housing halves  

These are 3x5mm Backplate screws for the Traxxas 2.5, 2.5R, and 3.3 engines. 3x6 mm cap-head machine screws with hex drive heads. Features: Black steel construction Includes: Six black steel cap head screws Specifications:Length: 5mmDiameter:...

This is the Traxxas Center Driveshaft 6061-T6 aluminum (red-anodized) (214mm) Traxxas designed this one-piece driveshaft out of tough 6061-T6 aluminum to be both strong and lightweight. Internal splines fit directly onto the input shafts of the front and...

This is the Traxxas Orange Motor Plate This brightly-anodized aluminum motor plate keeps your motor tight during intense high-flying action with a touch of style. Replacement Part ForJato 4X4 VXL Accessory Part ForJato 4X4 BrushlessJato 4X4 VXLRustler...