Jato 4x4

This is the Traxxas Blue Aluminum Front Shock Tower Brace Give your Jato 4X4 the ultimate strength upgrade with this aluminum front shock tower brace. Made from tough 6061-T6 aluminum and brilliantly anodized in high-impact color, the brace provides...

This is the Traxxas Orange Motor Plate This brightly-anodized aluminum motor plate keeps your motor tight during intense high-flying action with a touch of style. Replacement Part ForJato 4X4 VXL Accessory Part ForJato 4X4 BrushlessJato 4X4 VXLRustler...

This is the Traxxas Motor Plate This brightly-anodized aluminum motor plate keeps your motor tight during intense high-flying action with a touch of style. Replacement Part ForFord Fiesta ST RallyFord Fiesta ST Rally BrushlessFord Fiesta ST RallyJato 4X4...

This is the Traxxas Extreme Heavy-Duty Steel CV Driveshaft Rebuild Kit Rebuild your Traxxas extreme-duty steel CV driveshafts with this kit. Each kit contains the pins and hardware to rebuild one driveshaft. Fits: TRA9051X and TRA9052X

This is the Traxxas Extreme Heavy Duty Rear Driveshaft Assembly w/ HardwareReplacement rear driveshaft for the Extreme Heavy Duty Upgrade Kit. *Driveshafts are for use with the 9080 upgrade kit only and will not fit standard suspension parts.Fully...

This is the Traxxas Extreme Heavy Duty Front Driveshaft Assembly w/ HardwareReplacement front driveshaft for the Extreme Heavy Duty Upgrade Kit. Driveshafts are for use with the 9080 upgrade kit only and will not fit standard suspension parts. Fully...

This is the Traxxas Differential output yoke assembly, extreme heavy duty (2) (left or right, front or rear) (assembled with external-splined half shaft) (for use with #9080 upgrade kit)Replacement differential output yokes for the 9080-series Extreme...

This is the Traxxas Extreme Heavy Duty Front Outer Stub Axle Assembly (1).  Left or Right - Assembled with internal-splined half shaft.Replacement front outer stub axle for the Extreme Heavy Duty Upgrade Kit. Stub axles are designed to fit the 9080...

This is the Traxxas Wing/ wing washer/ 4x12mm FCS (2)Give your Sledge or Jato 4X4 a bold new look with a colorful wing. Available in several eye-catching colors, the high-downforce rear wing includes the wing washer and 4x12 mm attachment screws (2)...

This is the Traxxas Wing/ wing washer (blue)/ 4x12mm FCS (2) Give your Sledge or Jato 4X4 a bold new look with a colorful wing. Available in several eye-catching colors, the high-downforce rear wing includes the wing washer and 4x12 mm attachment screws...

This is the Traxxas Wing/ wing washer (orange)/ 4x12mm FCS (2)Give your Sledge or Jato 4X4 a bold new look with a colorful wing. Available in several eye-catching colors, the high-downforce rear wing includes the wing washer and 4x12 mm attachment screws...

This is the Traxxas Wing/ wing washer (red)/ 4x12mm FCS (2)Give your Sledge or Jato 4X4 a bold new look with a colorful wing. Available in several eye-catching colors, the high-downforce rear wing includes the wing washer and 4x12 mm attachment screws...

This is the Traxxas Wing/ wing washer (green)/ 4x12mm FCS (2)Give your Sledge or Jato 4X4 a bold new look with a colorful wing. Available in several eye-catching colors, the high-downforce rear wing includes the wing washer and 4x12 mm attachment screws...

This is the Traxxas Wing/ wing washer (white)/ 4x12mm FCS (2)Give your Sledge or Jato 4X4 a bold new look with a colorful wing. Available in several eye-catching colors, the high-downforce rear wing includes the wing washer and 4x12 mm attachment screws...

This is the Traxxas Input shaft (slipper shaft)/ bearing adapter (1)/ pin (1) Includes: Slipper clutch input shaft with bearing adapter and dowel pin Replacement Part ForBIGFOOT 4X4 Brushless Officially Licensed ReplicaFord Fiesta ST RallyFord F-150...

This is the Hobbywing Xerun XR10 Justock G3S, JS4 13.5T G2.1 Motor Combo Best used for: 1/10, 1/12 On-road and Off-road Club competition and Normal Training. Features The timing has been permanently set to 0 degree. With the identical competition motor,...

This is the GPM 4140 Carbon Steel Shoulder Screws 3x12mm (6) Made by 4140 carbon steel, Set of six 3x12mm shoulder screws (shock attachment screws) with hex-drive heads Replaces Stock Part # 3642X IncludesShoulder Screws 3x12 mm - 6PCS  

This is the Traxxas Official Team Traxxas Racing Decal Set (Flag Logo/ 6-color) The official Team Traxxas Racing Decal sheet has been revised and now includes EZ-Start, Stinger Motors, ProGraphix, TRX engines and www.Traxxas.com logos. Perfect for adding...

This is the Bold RC Adventure Trail Backpack Adventure Trail BackpackThe Adventure Trail Backpack is a versatile and lite weight RC transportation option. Featuring a durable shell material that stands up to various conditions, reinforced stitching,...

These are the Traxxas Gear adapters, fixed, Rustler 4x4Fixed gear adapters take the guesswork out of setting your gear mesh with five preset gearing positions. Place the adapter in the aluminum motor plate and insert the motor screw through the desired...

This is the Traxxas Differential Gear Set for the #6780 center diff.   Replacement spider gear set for the 6780 center differential and Drag Slash differential. Includes (4) Spider Gears(2) Spider Gear Shafts

These are the Traxxas Hardened Steel Center Differential Output Gears (2) for use in the #6780 metal center diff unit for the Rustler 4x4, Slash 4x4, and Stampede 4x4 trucks.

This is the Traxxas Housing, center differential (aluminum)/ x-ring gaskets (2)/ ring gear gasket (1)/ bushings (4)/ 5x10x0.5 PTW (1)/ 2.5x10 CCS (with threadlock) (4) Replacement aluminum housing for 6780 center differential. Includes ring gear gasket,...

This is a set of four Traxxas 17mm Splined Serrated Black Aluminum Wheel Nuts for use on the X-Maxx and E-Revo 2.0 monster trucks. Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug no matter how intense the action...

This the Traxxas Bearing adapter, 6061-T6 aluminum (green-anodized) (1)/ 10x15x4mm ball bearing (black rubber sealed) (1) (for slipper shaft) Upgrade your slipper shaft with this tough 6160-T6 aluminum adapter. Perfect for high-power applications, the...

This is the Traxxas Center Driveshaft 6061-T6 aluminum (green-anodized) (214mm) Traxxas designed this one-piece driveshaft out of tough 6061-T6 aluminum to be both strong and lightweight. Internal splines fit directly onto the input shafts of the front...

This is the Traxxas Battery hold-down (1)/ hold-down retainer, front & rear (1 each)Battery hold-down with front and rear retainers for vehicles equipped with the low-CG 4X4 chassis. Does not fit standard chassis. For a complete chassis conversion,...

This is the Traxxas Box, receiver (sealed)/ foam pads/ 2.5x12mm CS (2)/ 3x6mm CS (2)/ 3x12mm BCS (2)Sealed receiver box for vehicles equipped with the low-CG 4X4 chassis. Includes foam pad, silicone seal, grease, 2.5x12 mm schews (2), 3x6 mm screws (2),...