Jato 4x4

This is the Traxxas EZ-Peak Dual iD 100W LiPo and NiMH charger. It will charge two 2S-3S LiPo, and 5-8 cell NiMH battery packs. The EZ-Peak Dual charger works with both iD batteries, and standard...

This is the Traxxas EZ-Peak Plus 4-Amp Auto-iD LiPo and NiMH Charger. It will charge 2S-3S LiPo, and 5-8 cell NiMH battery packs. The EZ-Peak Plus 4-Amp charger works with the Traxxas iD style...

This is the Traxxas EZ-Peak Live Dual iD 200-Watt Charger for LiPo and NiMH batteries. The new EZ Peak Live Dual Output iD Charger is the most advanced, most powerful charger ever from Traxxas! As...

This is the Traxxas Tool Set with Carrying Case. This is the must-have set for all Traxxas owners. It comes with a six Allen/Hex drivers, five nut drivers, three Phillips head screwdrivers, three...

This is the Traxxas EZ-Peak Plus 4s, 8-Amp Auto-iD NiMH/LiPo with iD Auto Battery Identification Charger. With up to 8-amps of output it will charge 2S-4S LiPo, and 5-8 cell NiMH battery packs. The...

This is the Traxxas EZ-Peak Live 12-Amp ID Charger. With up to 12-amps of output and the ability to operate the charger via Bluetooth from your iOS or Android device, this is the most powerful, most...

This is the Traxxas 3-Channel TQi Sport 2.4 GHz Receiver with TSM TQi Sport 2.4 GHz 3-Channel Micro ReceiverThe TQi Sport 2.4 GHz 3-channel micro receiver uses an integrated LINK button for fast and...

This is Silicone grease that is used throughout most all of the Traxxas kits, it can also be used in most any R/C greasing application.  (1- tube of grease approximately 1 oz.)

This is the Traxxas Battery hold-down, tall (1)/ hold-down retainer, front & rear (1 each) (allows for installation of taller, multi-cell batteries)Extended battery hold-down with front and rear...

This is the Traxxas TQi Transmitter Traxxas Link Enabled 2.4GHz High Output 3-Channel (Transmitter Only) TransmitterTQi Traxxas Link enabled, 2.4GHz high output, 3-channel

This is the Diff Carrier/Gasket Set Replacement differential carrier includes X-ring gaskets (2), ring gear gasket, and 6x10x0.5 mm washer. FEATURES:<

This is the Diff Oil Kit for the Revo by Traxxas. Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential by using higher or lower...

This is a set of Traxxas Stub Axle Pins.  These pins slide through the axle and keep the wheel hexes from spinning on the axle. Set of four replacement stub axle pins

This is the Traxxas Alloy Slipper Pressure Plate and Hub for the Revo 2.5, 3.3, E-Revo, E-Revo Brushless, E-Maxx 16.8V, and E-Maxx Brushless trucks. These are part of the slipper assembly.

This is the Traxxas Rear Center Drive Hub and Set Screw for 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, Rally, Telluride, and XO-1 vehicles. Rear center drive hub with 4x3 mm grub screw.

This is the Traxxas Front 37T Differential Ring and 13T Pinion Gear 37-tooth ring and 13-tooth pinion gears for front differentials. Replacement Part ForFord Fiesta ST RallyFord F-150 Raptor R...

This is the Traxxas Differential ring gear, pinion gear, (machined spiral cut) (rear) Spiral-cut 37-tooth ring and 13-tooth pinion differential gear sets are CNC-machined from a solid block of steel...

This is a set of four Traxxas 17mm Splined Serrated red-aluminum Wheel Nuts for use on the X-Maxx and E-Revo 2.0 monster trucks. Set of four 17 mm wheel nuts are serrated for extra bite on the wheel...

This is the Traxxas Cover, gear (clear) The crystal-clear plastic gear cover is just as durable as the stock cover, but lets you see the gear mesh for easy, no-tool inspection. Also an accessory for...

This is a package of six 3x6mm Traxxas Button Head Screws. Features: Steel construction Black in colo

This is the Traxxas Velineon VXL-4s Brushless Electronic Waterproof Speed Control - (Fwd/Rev/Brake) The 3440 Velineon 4s brushless power system takes your RC experience to the extreme. New...

This is a set of four Traxxas 17mm Splined Serrated orange-aluminum Wheel Nuts for use on the X-Maxx and E-Revo 2.0 monster trucks. Set of four 17 mm wheel nuts are serrated for extra bite on the...

This is the Traxxas Differential, rear (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash, Stampede, Rustler) (13/37 ratio)The Pro-BUILT 4X4 rear...

This is the Traxxas Differential, front (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash, Stampede, Rustler) (13/37 ratio)The Pro-BUILT 4X4 front...

This is the Traxxas Complete Transmission for 1/10 2WD Rustler, Bandit, Stampede, and Slash trucks.  This comes pre-assembled with internal gears, slipper clutch, and spur gears, making for an...

This is the Traxxas Velineon 540XL Brushless 2400Kv 70mm Motor (Assembled with 6.5mm Gold-Plated Bullet Connectors) (Not for use in Marine Models) The Velineon 540XL brushless motor delivers massive...

This is the Traxxas Rear Ring and Pinion Differential Gears for the Slash 4x4, Hoss 4x4, Stampede 4x4, Telluride, 1/10 Rally, and XO-1 vehicles. 37-tooth ring and 13-tooth pinion gears for rear...

This is the Traxxas Differential Gear Set for the Slash 4x4, Stampede 4x4, 1/10 Rally, XO-1, and Telluride vehicles. These feature hardened steel construction.INCLUDES:Two Output GearsTwo Spider...

This is the Traxxas Center Driveshaft 6061-T6 aluminum (blue-anodized) (214mm) Traxxas designed this one-piece driveshaft out of tough 6061-T6 aluminum to be both strong and lightweight. Internal...

This is the Traxxas LiPo cell voltage checker and balancer with the #2938X adapter for use with Traxxas iD batteries. This can be used to check cell voltages on 2S, 3S, and 4S Traxxas ID LiPo...

This is the Traxxas Machined Spiral Cut Front Differential Ring and Pinion Gear. These are used as an upgrade over the 5379X gears found in many vehicles. Spiral-cut 37-tooth ring and 13-tooth pinion...

These are the 3x6mm Flathead Machine Screws from Traxxas.FeaturesSteel constructionBlack in color

Traxxas Splined 17mm Wheel Nuts (blue-anodized) (4) This set of four 17 mm blue aluminum wheel nuts is beautiful anodized for eye-catching looks with Traxxas-tough durability.

This is the Traxxas Sway Bar Kit (Front and Rear) with Adjustable Linkage Sway bars are a powerful tool to change up the handling of your Jato 4X4. Sway bars allow you to dial in more or less...

This is the Front Differential Housing FEATURES Hardened plastic construction

This is the RC Screwz Traxxas Jato 4X4 BL-2S (90154-4) Rubber Shielded Bearing Kit. Protect your off-road monster from dirt, dust, mud and grime with this high-quality rubber shielded bearing kit...

This is the RC Screwz Traxxas Jato 4X4 VXL (90386-4) Rubber Shielded Bearing Kit. Protect your off-road monster from dirt, dust, mud and grime with this high-quality rubber shielded bearing kit...

This is the RC Screwz Traxxas Jato 4X4 VXL (90386-4) Stainless Steel Screw Kit. RCScrewZ Stainless Screw Kits are the best way to beef up the hardware throughout your RC vehicle in one convenient...

This is the RC Screwz Traxxas Jato 4X4 BL-2S (90154-4) Stainless Steel Screw Kit. RCScrewZ Stainless Screw Kits are the best way to beef up the hardware throughout your RC vehicle in one convenient...

This is the Traxxas Hardened Steel Front Center Drive Hub and Screw Pin for 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, Rally, and XO-1 vehicles. The replacement hardened-steel drive hub connects your...