Tools

This is the Traxxas Tool Set with Carrying Case. This is the must-have set for all Traxxas owners. It comes with a six Allen/Hex drivers, five nut drivers, three Phillips head screwdrivers, three flat-head screw drivers, and an dual-end open-ended...

This is the Traxxas Speed Bit Set, screwdriver, 3-piece straight (3mm slotted, #1 Phillips, and #2 Phillips bits), 1/4" drive. New Phillips and Straight screwdriver bits are precision-ground from the same premium hardened tool steel as Traxxas hex speed...

This is the Traxxas Speed Bit 7-Piece Metric Hex and Nut Driver Essentials Set with 1/4" drive Premium Handle and Travel Pouch. Set Includes:Straight Hex Drivers: 1.5mm, 2.0mm, 2.5mmNut Drivers: 5.0mm, 5.5mm, 7.0mm, 8.0mmPremium handle (1/4" drive)Travel...

This is the Traxxas Speed Bit Master Set Metric 7-Piece Straight and Ball End Hex Driver Set with 1/4" Drive Premium Handle and Travel Pouch. Set Includes:Premium handle (1/4" drive)Travel pouchStraight Hex Drivers: 1.5mm, 2.0mm, 2.5mm, 3.0mmBall End Hex...

This is the Traxxas Speed Bit Master Set Metric 6-Piece Nut Driver Set with 1/4" Drive Premium Handle and Travel Pouch. Set Includes:4.0 mm Nut Driver4.5 mm Nut Driver5.0 mm Nut Driver5.5 mm Nut Driver7.0 mm Nut Driver8.0 mm Nut DriverPremium handle...

This is the Traxxas Speed Bit 3-Piece Metric Hex Driver Set with 1/4" drive.  This set includes straight tip 1.5mm, 2.0mm, and 2.5mm end bits.  The 1/4" drive makes these perfect for use with powered screwdrivers, or with the standard Traxxas...

This is the Traxxas Rubber Pit Mat The Traxxas heavy-duty pit mat is the perfect addition to your RC workbench. The chemical-resistant, heavy-gauge rubber construction takes a pounding to help protect your work surface from damage. The generous 36" x 20"...

This is the Traxxas Phone Mount for Traxxas TQi and Aton Transmitters. The Transmitter Phone Mount provides a secure mounting base for your mobile device when using it for the Traxxas app.

This is a Team Integy Titanium-Nitride 6-Piece Lightweight Hex Allen Wrench Set.  This includes 3/32", 5/64", 1/16", 0.05", 1.5mm, and 2.5mm wrenches.  The tips of the wrenches are replaceable should they become damaged.FeaturesColor coded...

This is the RPM Small Parts Tray with Magnet. Keep your pit area clean and tidy without losing all of those e-clips, nuts, & bolts that tend to roll off of your workbench whenever you work on your vehicle with the RPM Small Parts Tray. It incorporates...

This is the RPM Pit-Pro Extreme Car Stand for 1/10 and 1/8 Scale vehicles. Car stands have been around for a long time, with minimal innovation or ingenuity. That changes NOW! The all-new RPM Pit-Pro Extreme Car Stand is a completely new and unique stand...

This is the Integy Realistic Scale Model 2-Tier Rolling Metal Storage Organizer Cart for RC Color: BlueScale: 1/10 Size Bump up your scale display or concourse setup with the Integy Realistic Scale Mechanic's Tool Cart for RC. The cart is scaled down to...

This is the Integy Realistic Scale Model 2-Tier Rolling Metal Storage Organizer Cart for RC Color: RedScale: 1/10 Size Bump up your scale display or concourse setup with the Integy Realistic Scale Mechanic's Tool Cart for RC. The cart is scaled down to...

This is the Integy Realistic Scale Model 2-Tier Rolling Metal Storage Organizer Cart for RC Color: BlackScale: 1/10 Size Bump up your scale display or concourse setup with the Integy Realistic Scale Mechanic's Tool Cart for RC. The cart is scaled down to...

This is the RPM Precision Camber Gauge. One of the most critical suspension adjustments on a R/C vehicle is the vehicle’s camber. RPM has proven time after time that even the most experienced drivers cannot set their camber by “eye”. With our Camber...

This is the Traxxas Speed Bit 3-Piece Metric Ball Hex Driver Set with 1/4" drive.  This set includes 2.0mm, 2.5mm, and 3.0mm ball end bits.  The 1/4" drive makes these perfect for use with powered screwdrivers, or with the standard Traxxas...

This is the Traxxas Speed Bit 2-Piece Metric Ball Hex Driver Set with 1/4" drive.  This set includes 2.0mm and 2.5mm ball end bits.  The 1/4" drive makes these perfect for use with powered screwdrivers, or with the standard Traxxas Speed Bit...

This is the Traxxas Speed Bit 4-Piece Metric Hex Driver Set with 1/4" drive.  This set includes straight tip 1.5mm, 2.0mm, 2.5mm and 3.0mm end bits.  The 1/4" drive makes these perfect for use with powered screwdrivers, or with the standard...

This is the Traxxas 17mm Splined Wheel Nut Wrench. This is a must-have for vehicles equipped with 17mm wheel nuts, such as the Revo 3.3, E-Revo Brushless, T-Maxx 3.3 and XO-1.

This is the DuBro Tru-Spin propeller balancer for R/C applications. The DuBro Tru-Spin Prop Balancer is the most precise balancer on the market. It is perfect for air props of all sizes and weights, boat props, spinners, car wheels, heli rotor heads,...

This is the RPM Toe-In Gauge. Our Toe-In gauge allows you to do track-side checks of the toe-in without removing the wheels! Our gauge checks toe through the simple method of comparing the distance between the wheels at the rear of the tire to the...

This is the Traxxas Curved Tip Heavy Duty Body Scissors for cutting and trimming polycarbonate RC bodies. To do a good job on a custom body, the right tools are a must. Having both a curved tip and straight tip (Traxxas part TRA3431) scissors in your...

This is the Traxxas Hex Wrench Set with 1.5mm, 2mm, 2.5mm, 3mm, and 2.5mm ball wrenches. Whether you have a Slash, Revo, E-Maxx, Summit, or something else, these are a must-have set of wrenches for Traxxas owners!

This is a set of Traxxas LiPo Battery Charge Indicator Plug Set. The set includes four Green, four Blue, and four Grey indicator plugs. Use these plugs to know which batteries are fully charged, discharged, or in storage charge, and to protect the...

This is the Traxxas Straight Tip Heavy Duty Body Scissors for cutting and trimming polycarbonate RC bodies. To do a good job on a custom body, the right tools are a must. Having both a straight tip and curved tip (Traxxas part TRA3432) scissors in your...

This is the Robart Hobby Paint Shaker Machine with AC Power Supply. The paint shaker will blend paints at 5000 shakes per minute, and is designed to hold 1/4 oz to 1 ounce bottles. This is a must-have item for serious RC airplane, car, truck, and boat...

This is the RPM Bearing Blaster Bearing Cleaning Tool. Blast away debris from your bearings with the RPM Bearing Blaster! RPM has incorporated a simple two-piece design to simplify difficult bearing cleaning tasks. The Bearing Blaster has an open, flow...

This is the Team Integy Complete 29-Piece Racing Tool Set with Pro Carrying Bag. Features: Steel driver tips Removable tips for easy replacement Anodized aluminum handles Color coded driver handles for easy identification Black nylon book style,...

This is the Integy 7-Piece Ti-Nitride Hex Wrench Set. This set of wrenches looks very sharp, and the Ti-Nitride tips are precisely made. The tips are replaceable should one of them ever get worn or damaged. We have replacement tips available...

This is an Integy 6-Piece Titanium-Nitride Hex Wrench Set. These wrenches are color coded, and the 6 sizes are 0.05" 1/16" 3/32" 5/64" 2.5mm and 1.5mm. These are very sturdy and convenient to use, and the tips have a high degree of...

This is an Integy 1/16" Replacement Tip for the Team Integy Ti-Nitride Hex Wrench Set.  This is an inexpensive way to get your tools back in perfect condition again. FEATURES Hex wrench tips have a high degree of tolerance to lock screws into...

This is the Traxxas iD LiPo Battery Balance Adapter for Cell Voltage Checkers. This works with 2S, 3S, and 4S ID LiPo batteries to connect them to cell voltage checkers for individual cell reading. Warning: These are not intended for charging. The...

This is the Traxxas LiPo cell voltage checker and balancer with the #2938X adapter for use with Traxxas iD batteries. This can be used to check cell voltages on 2S, 3S, and 4S Traxxas ID LiPo batteries, and also to equalize the battery pack cells if...

This is the RPM Shock Duplicator Matching Tool for up to 6 1/4" (158mm) Long Shocks using 4-40 or 3mm mounting screws. This covers most 1/8, 1/10, and down to 1/16 scale shocks.How do you know if your shocks are built correctly? Do you “eyeball” the...

This is an Excel Hobby Knife K1 & K2 set with 10 blades.

This is the Excel 6-Piece Hobby and Jeweler Screwdriver Set.  This set of Phillips and Straight Blade screwdrivers work very well on small, delicate R/C car parts, electronics, and in many other applications.  This is a great set of tools...

This is the Hangar 9 Z-Bend Pliers for airplane control linkages.  This will greatly improve the quality and control of your linkage bends, and is much more accurate than using a standard pliers.  The heat-treated steel pliers make Z-bends...

This is an Integy 2.5mm (motor screw) Replacement Tip for the Team Integy Ti-Nitride Hex Wrench Set.  This is an inexpensive way to get your tools back in perfect condition again. FEATURES Hex wrench tips have a high degree of tolerance...

This is the Traxxas Premium Large Rubber Overmold Speed Bit Handle with 1/4" Drive for use with Traxxas Speed Bit Metric Hex/Allen and Nut Driver tips. The large speed bit handle holds bits securely with an overmolded rubber grip to provide excellent...

This is the Traxxas Aluminum Handled Body Post Hole Reamer with Cap for Lexan RC bodies.  With a crisp steel cutting edge and included aluminum cap for protection, this is not your average body reamer.  The tip features both metric (mm) and...