Telluride

These are the Traxxas Progressive Rate Front Springs (White) for use on the Traxxas 5862 Big Bore Shock set for the 2WD Slash, Nitro Slash, 2WD Stampede, Rustler, Bandit, and Monster Jam trucks.

These are the Traxxas Slash 4X4 Progressive Shock Springs: Rear, +10% Rate, Pink (2) Pair of XX-long progressive-rate springs are custom-wound to provide responsive control over small bumps, with a...

This is the Traxxas Blue Aluminum Front Shock Tower for the Slash 4x4, Stampede 4x4, 1/10 Rally, and Telluride vehicles. Insist on the only aluminum shock towers that are by Traxxas, for Traxxas. ...

This is the Traxxas aluminum (Red Anodized Shock Caps Shock caps, aluminum (Red-anodized) (4) (fits all Ultra Shocks)Aluminum shock caps are great way to boost the durability and style of any Traxxas...

These are the Traxxas X-Long Titanium-Nitride Coated Hardened Steel Shock Shafts. Each package includes two shock shafts.For use with X-Long shocks on:1/10 Monster Jam Trucks1/10 RallyBandit...

This is the Hot Racing 28-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:Standard 4140 steel and heat...

This is the Traxxas Input shaft (slipper shaft)/ bearing adapter (1)/ pin (1) Includes: Slipper clutch input shaft with bearing adapter and dowel pin Replacement Part ForBIGFOOT 4X4 Brushless...

Traxxas BFGoodrich S1 Ultra-Soft Tires on SCT Split Spoke Chrome Red Beadlock Wheels for 4WD F/R, 2WD Rear Pair of ultra-soft S1-compound BFGoodrich Mud-Terrain T/A KM2 tires come pre-glued and...

This is the Traxxas Bulkhead tie bars, front & rear, aluminum (red-anodized).Set of front and rear bulkhead tie bars with a brilliant red anodized finish Accessory part forFord Fiesta ST RallyRustler...

This is the Traxxas Hub retainer, 17mm hubs, M4 X 0.7 (4) (use with #5853X, #6856X, #6469). This is Traxxas part number 5854Part Number: 5854 / TRA5854Fits1/10 Monster Jam Trucks1/10...

This is the Traxxas aluminum (Orange Anodized Shock Caps Shock caps, aluminum (orange-anodized) (4) (fits all Ultra Shocks)Aluminum shock caps are great way to boost the durability and style of any...

This is a pack of Traxxas 4x15mm Countersunk Head Head Machine Screws. Each package includes six screws.Replacement part for these modelsBIGFOOT No. 1 Officially Licensed ReplicaDrag Slash 1967...

This is the Traxxas Rear Linkage Sway Bar Set for the Slash 4x4. Features: Nylon and steel construction Includes:2 Rod ends2 Ball stu

These are the Traxxas Slash 4X4 Progressive Shock Springs: Front, +10% Rate, Pink (2). Features

This is the Traxxas Center Differential kit (complete)The optional center differential transfers power to the front and rear differentials independently for smooth power delivery in rough conditions...

This is the Traxxas Racing Sponsors Decal Sheet Dress up your model’s body with the Traxxas Racing Sponsor Decal Sheet. The decal sheet includes over 25 different full-scale sponsors including, NOS,...

This is the Traxxas RC Car/Truck Carrier Backpack Features Thick, Weather-Resistant Nylon Fabric Heavy Duty Zippers and Stitching Large Zippered Front Pockets for Tools and Parts Four-Compartment...

This is the Traxxas Medium RC Car/Truck Duffle Bag Features Perfect for 1/10 and 1/8 Scale Models Thick, Weather-Resistant Nylon Fabric Heavy Duty Zippers and Stitching Large Outer Pockets for...

This is the Traxxas Shoulder Strap for the #9917 Duffle Bag Add additional carrying support with the strap for your RC Car/Truck Duffle Bag Features Heavy Duty Shoulder Strap for Fuffel Bag with...

This is the Traxxas Official Team Traxxas Racing Decal Set (Flag Logo/ 6-color) The official Team Traxxas Racing Decal sheet has been revised and now includes EZ-Start, Stinger Motors, ProGraphix,...

This is the RPM Body Skid Rails - fits most 1/5 - 1/12 bodies These Body Skid Rails will fit nearly any scale R/C car or truck. The only requirements are, the surface must be featureless, flat or...

This is the GPM Racing Gunmetal Aluminum Adjustable 25T Spline Locking Servo Horn for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rustler 4x4, and 1/10 Rally vehicles. Made of 6061-T6 aluminum, these are...

These are the GPM Racing Red Aluminum Rear Stub Axle Carriers for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, 1/10 Rally, Telluride, and others (see below). Made of 6061-T6 aluminum and...

These are the GPM Gunmetal Aluminum Front Steering Blocks for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, Rally, and Telluride vehicles. These are made of 6061-T6 aluminum and anodized for a...

These are the GPM Racing Black Aluminum Front Steering Blocks for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, Rally, and Telluride vehicles. These are made of 6061-T6 aluminum and anodized for...

This is the Hot Racing Lightweight Hardened Steel 72-Tooth 48-Pitch Spur Gear for Traxxas Slash 2WD, Stampede 2WD, Rustler, Bandit, and Telluride vehicles. This will fit XL-5 brushed and VXL...

These are the Hot Racing Rear Progressive Rally Spec Springs (3 Pairs) for Traxxas Slash 2WD, Slash 4x4, Stampede 2WD, Stampede 4x4, Telluride, and Rustler XL-5 and VXL trucks. These fit the stock...

This is the Traxxas Linkage, front sway bar (2) (assembled with rod ends, hollow balls and ball studs). This is Traxxas part number 6895Part Number: 6895 / TRA6895Fits1/10 RallySlash 4x4...

This is the Traxxas Tires, Kumho, ultra-soft (S1 off-road racing compound) (dual profile 4.3x1.7- 2.2/3.0') (2)/ foam inserts (2).Replica Kumho tires are molded in ultra-soft S1 compound rubber for...

This is the Traxxas Axle carriers, rear, 6061-T6 aluminum, left & right (blue-anodized). This is Traxxas part number 6455Part Number: 6455 / TRA6455FitsXO-1More detail coming soon! Please check your...

This is the Traxxas BFGoodrich Mud-Terrain Tires on SCT Chrome Red Beadlock Wheels for 2WD Front. Pair of BFGoodrich Mud-Terrain T/A KM2 tires come pre-glued and mounted with foam inserts to chrome...

This is the Traxxas Tire & wheel assy, glued (SCT black, orange beadlock wheels, SCT off-road racing tires, foam inserts) (2) (2WD front). This is Traxxas part number 5864Part Number: 5864 /...

These are the Traxxas 2.5x6mm Cap-Head Hex Machine Screws. These come in packages of six screws, and are used in a wide variety of Traxxas vehicles.Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16...

This is the Traxxas Telemetry Expander Mount 6555 for the Slash 4x4, Stampede 4x4, 1/10 Rally, and Jato vehicles. This part makes it possible to mount the #6550 Telemetry Expander Module on these...

This is the Motor Mount for the Traxxas Slash 4x4. FEATURES Hardened plastic constructionBlack in

This is a Traxxas Front Shock Tower for the Slash 4x4 and Stampede 4x4 trucks.FEATURES:Hardened plastic construction

These are the Traxxas Slash 4X4 Progressive Shock Springs: Rear, -20% Rate, Orange (2) Pair of XX-long progressive-rate springs are custom-wound to provide responsive control over small bumps, with a...

This is the Traxxas Body Reamer Cap The Traxxas body reamer is a finely-honed cutting instrument. Protect your reamer's cutting surface with this replacement aluminum cap.

This is the Traxxas Red 6061-T6 Aluminum Center Driveshaft for Stampede 4x4 and Telluride trucks. Accessory Part ForStampede 4x4 Brushed XL-5Stampede 4x4 VXLStampede 4x4 XL-5TellurideNote: Trucks...

This is the Traxxas Green 6061-T6 Aluminum Center Driveshaft for Stampede 4x4 and Telluride trucks. Accessory Part ForStampede 4x4 Brushed XL-5Stampede 4x4 VXLStampede 4x4 XL-5TellurideNote: Trucks...