Telluride

This is the Traxxas Differential, front (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash, Stampede, Rustler) (13/37 ratio)The Pro-BUILT 4X4 front...

This is a pair of Traxxas Blue Rear Springs for use on XXL Ultra Shocks.Accessory Part ForBIGFOOT No. 1 Officially Licensed ReplicaFord F-150 RaptorHoss 4X4 VXLNitro SlashRustler VXLRustlerSlash 2WD...

This is a set of RPM Black Snap-Tite Body Savers. One of the weakest points on a Lexan body is where the body mounts to the chassis. The holes cut in the body for the body posts have a tendency to...

This is the Traxxas Rear Ring and Pinion Differential Gears for the Slash 4x4, Hoss 4x4, Stampede 4x4, Telluride, 1/10 Rally, and XO-1 vehicles. 37-tooth ring and 13-tooth pinion gears for rear...

This is a pair of Traxxas 6x12mm Ball Bearings with Rubber Dirt Shields. Pair of 6x12x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance,...

These are the Traxxas Slash 4X4 Progressive Shock Springs: Rear, +20% Rate, Blue (2) Pair of XX-long progressive-rate springs are custom-wound to provide responsive control over small bumps, with a...

This is the Traxxas Front Black Long Ultra Shocks complete with Spring Pre-load Spacers and Springs (2) Traxxas oil-filled Ultra Shocks utilize X-rings for a perfect seal and super-smooth performance...

This is the GPM Racing Black Aluminum Rear Gearbox for Traxxas Slash 4x4, Rustler 4x4, Stampede 4x4, 1/10 Rally, and XO-1 vehicles. Made of 6061-T6 aluminum, these are super rigid and prevent flex...

This is a pair of Traxxas Green Rear Springs for XXL Rear Ultra Shocks on trucks such as the Rustler, Slash 2WD, and Stampede.Accessory Part ForBIGFOOT No. 1 Officially Licensed ReplicaFord F-150...

This is the Hot Racing 27-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:Standard 4140 steel and heat...

This is the Traxxas 4-Amp DC Charger. This charger can be used with 6-cell 7.2V and 7-cell 8.4V NiMH Traxxas iD Batteries.FeaturesTraxxas's iD technology automatically configures and optimizes...

This is a pair of Traxxas Long Gray Ultra Shocks, Complete with Springs, Pre-Load Spacers, and Shock Oil. Traxxas oil-filled Ultra Shocks utilize X-rings for a perfect seal and super-smooth...

These are a set of 2.2" Mounted Satin Chrome Wheels and Tires for the Traxxas Slash, TRAC43**. FEATURES:Rear tires2.2" Satin Chrome WheelsOff-Road Racing Tires5 spoke design

These are the Wheelie Bar Wheels for the Traxxas 3.3 T-Maxx. FEATURES:Constructed of hard plasticAxles constructed of steel

This is the 16-T Pinion (48-pitch) Gear with Set Screw 16-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your...

This is the Traxxas Differential Gear Set for the Slash 4x4, Stampede 4x4, 1/10 Rally, XO-1, and Telluride vehicles. These feature hardened steel construction.INCLUDES:Two Output GearsTwo Spider...

These are the Traxxas Telemetry Trigger Magnet Holders for the TQi radio system. The telemetry trigger magnet holders secures the trigger magnet to the spur gear to provide real-time RPM and speed...

This is the Traxxas iD LiPo Battery Balance Adapter for Cell Voltage Checkers. This works with 2S, 3S, and 4S ID LiPo batteries to connect them to cell voltage checkers for individual cell reading...

This is the Traxxas aluminum (pink Anodized Shock Caps Shock caps, aluminum (pink-anodized) (4) (fits all Ultra Shocks)Aluminum shock caps are great way to boost the durability and style of any...

These are the Hot Racing Blue Aluminum 100mm HD Big Bore Rear Shocks for Slash 2WD, Slash 4x4, Stampede 2WD & 4x4, Rustler, Bandit, T-Maxx and E-Maxx front/rear, Associated SC10, and many other...

This is the Traxxas BFGoodrich Mud-Terrain T/A KM2 Tires with SCT Split-Spoke Satin Chrome, Black Beadlock Wheels Pair of BFGoodrich Mud-Terrain T/A KM2 tires come pre-glued and mounted with foam...

These are the Traxxas 3x15mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used across many different Traxxas vehicles.Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16...

This is a pair of Traxxas 8x16x5mm Ball Bearings.  These are replacements for the differential bearings in the Revo and other vehicles. Features: Stainless Construction

These are the optional 1.5° Aluminum Rear Stub Axle Carriers from Traxxas FEATURES Machined aluminum construction

This is the GPM Racing Silver Aluminum Rear Gearbox for Traxxas Slash 4x4, Rustler 4x4, Stampede 4x4, 1/10 Rally, and XO-1 vehicles. Made of 6061-T6 aluminum, these are super rigid and prevent flex...

This is the GPM Racing Blue Aluminum Rear Shock Tower for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rally, and Telluride vehicles. Made of 6061-T6 aluminum, these look awesome and improve the strength...

This is the GPM Racing Blue Aluminum Front Shock Tower for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rally, and Telluride vehicles. Made of 6061-T6 aluminum, these look awesome and improve the strength...

This is the GPM Racing Green Aluminum Adjustable 25T Spline Locking Servo Horn for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rustler 4x4, and 1/10 Rally vehicles. Made of 6061-T6 aluminum, these are...

These are the RPM Green Long Rod Ends (12) for 1/10 Traxxas vehicles. These are direct replacements for TRA5525 rod ends.RPM Rod Ends cover a wide range of currently available Traxxas vehicles...

These are the axle housings (or hub carriers). The housings are molded of black nylon. Included(2) Standard rear stub axle carriers

This is the GPM Racing Red Aluminum Rear Gearbox for Traxxas Slash 4x4, Rustler 4x4, Stampede 4x4, 1/10 Rally, and XO-1 vehicles. Made of 6061-T6 aluminum, these are super rigid and prevent flex...

These are the GPM Racing Orange Aluminum Rear Stub Axle Carriers for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, 1/10 Rally, Telluride, and others (see below). Made of 6061-T6 aluminum and...

This is the Hot Racing 12mm to 17mm Hex Hub Adapters with 6mm Offset for Traxxas Slash 4x4, Stampede 4x4, Telluride, Associated ProLite 4x4, and Losi TEN-T vehicles.These adapters are compatible with...

These are the Hot Racing Black Aluminum Steering Blocks for Slash 4x4, Stampede 4x4, 1/10 Rally VXL, and Telluride trucks.FEATURES:- CNC machined aluminum- Anodized black- Machined chamfered edges-...

These are Traxxas 3x8mm Button Head Screws (6). Features: Black steel construction with hex headIncludes: Six screws

This is the optional Sway Bar Kit for the Traxxas Slash 4x4, Stampede 4x4, and 1/10 Rally vehicles. Fine-tune your model for high-grip racing with this track-tested sway bar set. Sway bars reduce...

These are the Caster Blocks (C-Hubs) for the Traxxas Slash 4x4. Replacement left and right caster blocks (c-hubs) Replacement part forFord Fiesta ST RallyHoss 4X4 VXLRustler 4X4 VXLRustler 4X4Slash...

This is a set of six Traxxas 3mm x 18mm Button-Head Machine Screws for the Jato 2.5 and 3.3 trucks. Replacement part forDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0Ford F-150...

This is the GPM Racing Gunmetal Aluminum Rear Gearbox for Traxxas Slash 4x4, Rustler 4x4, Stampede 4x4, 1/10 Rally, and XO-1 vehicles. Made of 6061-T6 aluminum, these are super rigid and prevent...

These are the GPM Racing Red Aluminum Front Caster Blocks for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, Rally, and XO-1 vehicles. Made of 6061-T6 aluminum and anodized for a spectacular...