Telluride

These are the GPM Racing Red Aluminum 17mm Extension Hubs with 12mm Hex for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rustler 4x4, and other trucks listed below. This is a full set of four extensions. Made of 6061-T6 aluminum, these are a great option to...

These are the GPM Racing Black Aluminum Rear Stub Axle Carriers for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, 1/10 Rally, Telluride, and others (see below). Made of 6061-T6 aluminum and anodized for a spectacular finish, these are a great way...

This is the Hot Racing Aluminum 6mm Offset 17mm Hex Hubs for the Traxxas 1/10 Rally VXL, Slash 4X4, Stampede 4x4, and Telluride 4X4 vehicles. Offset from stock wheel hex is +12mm per side.FEATURES:- Black anodized CNC machined aluminum hex adapter- Blue...

This is the Traxxas Auto-Detectable Smart Voltage Sensor.  The auto-detectable voltage sensor plugs into the optional TQi Telemetry Expander to provide real-time voltage data while you drive. Real-time telemetry requires a TQi radio with Traxxas...

This is a set of Traxxas Rear Differential Housings for the Slash 4x4, Stampede 4x4, 1/10 Rally, Telluride, and the XO-1 carsIncludes: Two rear differential housing halves  

These are 3x5mm Backplate screws for the Traxxas 2.5, 2.5R, and 3.3 engines. 3x6 mm cap-head machine screws with hex drive heads. Features: Black steel construction Includes: Six black steel cap head screws Specifications:Length: 5mmDiameter:...

This is a pair of Traxxas BFGoodrich Mud-Terrain T/A KM2 Tires on Black Wheels with Satin Chrome Beadlock Look. These are for the front of 2WD trucks. The wheels have a 12mm hex.Stock Replacement OnSlash 2WD Ford RaptorAccessory Part ForNitro...

These are the Traxxas Black Front Springs (2) for Long Ultra Shocks found on vehicles like the Stampede, Craniac, Skully, Bigfoot, and other trucks based on the Stampede chassis.Accessory Part ForBIGFOOT No. 1 Officially Licensed ReplicaHoss 4X4...

This is the Hot Racing Aluminum Center Differential Case for Slash 4x4, Stampede 4x4, 1/10 Rally VXL, and Telluride.FEATURES:- CNC 6061-T6 aluminum construction, hard anodized- Direct fit hop up requires no model modification for useINCLUDES:- One (1)...

This is the Hot Racing 32-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:CNC Machined light weight Precision Gears with Standard 4140 steelReduce internal rotating mass...

This is the Traxxas BFGoodrich Mud-TerrainT/A KM2 tires with Chrome Green Beadlock Wheels. Pair of BFGoodrich Mud-Terrain T/A KM2 tires come pre-glued and mounted with foam inserts to chrome SCT wheels with green beadlock-style trim. Fits: 12 mm Hex, 2WD...

This is the Traxxas Black Rear Springs for use on the XX-Long Ultra Shocks used on vehicles like the Slash 2WD, Rustler, Stampede 2WD, Stampede 4x4, and others.Accessory Part ForBIGFOOT No. 1 Officially Licensed ReplicaFord F-150 RaptorHoss 4X4 VXLNitro...

This is a set of Traxxas 3x15mm Flat-Head Hex Drive Machine Screws. Each package includes six screws.Includes: Six 3 x 15mm Flathead Hex Machine Screws Replacement Part ForBandit VXLDrag SlashFord F-150 RaptorFord Fiesta ST RallyHoss 4X4 VXLMaxxRustler...

These are the Traxxas Slash 4X4 Progressive Shock Springs: Front, -20% Rate, Orange (2) Features Custom wound for Slash 4X4 Progressive-rate design allows small-bump compliance without compromising big-hit capability Durable powdercoated...

These are a set of 2.2" Mounted Satin Chrome Wheels and Tires for the Traxxas Slash, TRAC43**. FEATURES:Front tires2.2" Satin Chrome WheelsOff-Road Racing Tires5 spoke design INCLUDES:Two 2.2" mounted Off-Road Racing Tires, Satin Chrome Wheels Foam...

These are the GPM Racing Orange Aluminum 17mm Extension Hubs with 12mm Hex for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rustler 4x4, and other trucks listed below. This is a full set of four extensions. Made of 6061-T6 aluminum, these are a great option...

This is the GPM Racing Orange Aluminum Front Shock Tower for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rally, and Telluride vehicles. Made of 6061-T6 aluminum, these look awesome and improve the strength of your car or truck. Full mounting hardware is...

This is a pair of Traxxas White Rear Springs for XXL Ultra Shocks. These are the stock springs found on many vehicles such as the Stampede 2WD, 4x4, and Rustler trucks. Replacement Part ForHoss 4X4 VXLRustler 4X4Rustler VXLRustlerStampede 4X4 VXLStampede...

This is the Hot Racing Black 6061-T6 Aluminum Rear Shock Tower for Slash 4x4, Stampede 4x4 XL-5, and Stampede 4x4 VXL trucks. Replaces: Stock TRA6839 front shock towerFEATURES:6061-T6 Aluminum constructionBlack anodized colorMuch stronger than stock...

This is the Hot Racing Black 6061-T6 Aluminum Front Shock Tower for the Slash 4x4, Stampede 4x4 XL-5, and Stampede 4x4 VXL trucks. Replaces: Stock TRA6839 front shock towerFEATURES:6061-T6 Aluminum CNC construction.Black anodizedMuch stronger than stock...

This is the Traxxas Linkage, steering (3x20mm turnbuckle) (1)/ rod ends (2)/ hollow balls (2). This is Traxxas part number 6846Part Number: 6846 / TRA6846FitsSlash 2WD VXLSlash 2WD VXL (low CG)Slash 4x4 (low-CG)Slash 4x4 (standard chassis)Slash 4x4...

This is the Traxxas Telemetry Trigger Magnet for the Traxxas TQi Telemetry System. Replacement 5x2 mm telemetry trigger magnet.IncludesOne Telemetry Trigger Magnet for the Traxxas TQi Telemetry SystemSpecifications5mm x 2mm round magnet Replacement Part...

This is the GPM Racing Orange Aluminum Rear Shock Tower for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rally, and Telluride vehicles. Made of 6061-T6 aluminum, these look awesome and improve the strength of your car or truck. Full mounting hardware is...

This is the GPM Racing Green Aluminum Rear Shock Tower for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rally, and Telluride vehicles. Made of 6061-T6 aluminum, these look awesome and improve the strength of your car or truck. Full mounting hardware is included...

This is the GPM Racing Green Aluminum Front Shock Tower for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rally, and Telluride vehicles. Made of 6061-T6 aluminum, these look awesome and improve the strength of your car or truck. Full mounting hardware is...

This is the GPM Racing Gunmetal Aluminum Rear Shock Tower for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rally, and Telluride vehicles. Made of 6061-T6 aluminum, these look awesome and improve the strength of your car or truck. Full mounting hardware is...

This is the GPM Racing Gunmetal Aluminum Front Shock Tower for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rally, and Telluride vehicles. Made of 6061-T6 aluminum, these look awesome and improve the strength of your car or truck. Full mounting hardware is...

These are the GPM Racing Orange Aluminum Front Caster Blocks for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, Rally, and XO-1 vehicles. Made of 6061-T6 aluminum and anodized for a spectacular finish, these feature bearing-supported kingpins for...

This is the Traxxas Motor mount, 6061-T6 aluminum (blue-anodized). The aluminum motor mount is precision-machined from solid 6061-T6 alloy for extra rigidity and total power transfer in high-power brushless applications. The brilliant anodized finish...

This is the Traxxas Caster blocks (c-hubs), 6061-T6 aluminum, left & right (red-anodized). Left and right red aluminum caster blocks improve the appearance, ruggedness, and control of your Traxxas model. The billet 6061-T6 aluminum construction adds...

These are the Traxxas 3x15mm Cap-Head Hex Machine Screws. Each package includes six screws. These are used as head bolts on TRX 2.5 engines, and also on other areas of many vehicles.Replacement part for these modelsBandit VXLDrag Slash 1967 Chevrolet C10...

This is the Traxxas Blue Aluminum 17mm Wheel Hex Hub Set Traxxas' 17mm Hex Adapters make it easy to install a wide range of wheel and tire combinations on your Traxxas vehicle. Installation is simple and can be done in less than 15 minutes using the...

This is the Traxxas Blue Aluminum Rear Shock Tower for the Slash 4x4, 1/10 Rally, Stampede 4x4, and Telluride trucks. Made of precision-machined 7075-T6 aluminum and anodized blue, these look great and are a perfect fit on your vehicle.Includes:...

This is a Traxxas Rear Shock Tower for the Slash 4x4 and Stampede 4x4 trucks.FEATURES:Hardened plastic constructionBlack in colorINCLUDES: One rear shock towerREQUIRES: Installation on chassisSPECS:Length: 87.5mm (3.44")Width: 60.5mm (2.38")

This is the Traxxas Bellcrank Bushings (Plastic) set (5x8x2.5mm) (4) Includes: Set of four 5x8x2.5 mm bellcrank bushings

These are the GPM Racing Gunmetal Aluminum 17mm Extension Hubs with 12mm Hex for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rustler 4x4, and other trucks listed below. This is a full set of four extensions. Made of 6061-T6 aluminum, these are a great option...

These are Traxxas 2.5x8mm Cap Head Screws (6). Features: Steel construction Black in color Cap head design Includes: (6) 2.5x8mm cap head screws Specifications:Length: 5/16" (8mm)Diameter: 3/32" (2.5mm)

This is the GPM Racing Black Aluminum Rear Shock Tower for Traxxas 1/10 Slash 4x4, Stampede 4x4, Rally, and Telluride vehicles. Made of 6061-T6 aluminum, these look awesome and improve the strength of your car or truck. Full mounting hardware is...

This is the Hot Racing 26-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:Standard 4140 steel and heat treatedHeavy duty 4mm set screw for brushless powerYOU WILL...

This is the Traxxas Cover, gear/ motor wire hold-down clip. Replacement gear cover with motor wire hold-down clip Replacement Part For BIGFOOT 4X4 Brushless Officially Licensed ReplicaFord F-150 Raptor R 4X4Hoss 4X4 VXLJato 4X4 BrushlessJato 4X4 VXLSlash...