Radio/Electronic Accesories

This is a replacement antenna tube. Antenna tubes are used to help secure and protect reciever antenna wires. INCLUDES:1 blue antenna tube and 1 black antenna tu

This is the Traxxas Link Bluetooth Wireless Module for use with TQi radio systems having the a TQi logo with the blue letter "i" on the face. The wireless module works with Android (v4.4 OS and...

This is the Traxxas Phone Mount for Traxxas TQi and Aton Transmitters. The Transmitter Phone Mount provides a secure mounting base for your mobile device when using it for the Traxxas app.

This is the RealFlight Trainer Edition RC Flight Simulator with WS2000 Wireless Simulator USB Dongle Featuring Virtual Flight Instructor lessons, many of the most popular trainer airplane and...

This is the RealFlight Evolution RC Flight Sim Software Only The most modern, feature-packed, and expandable RC flight simulator yet! For more than two decades, RealFlight has been the #1 RC flight...

This is the RealFlight Evolution RC Flight Simulator with InterLink DX Controller The most modern, feature-packed, and expandable RC flight simulator yet! For more than two decades, RealFlight has...

This is a 4-pack of Rage RC AA Alkaline Batteries. These are excellent for use in R/C transmitters, receivers and other electronic devices needing AA batteries.Includes: Four AA alkaline batteries

This is a Traxxas Large Servo Saver for Futaba, Hitec, Airtronics, and Traxxas servos. This will work on most vehicles requiring a large servo saver. The servo saver protects your steering servo by...

This is the Long Temperature and Voltage Sensor for the Traxxas TQi system. To read voltage on electric vehicles, this must be used with the Traxxas part TRA6541X Power Tap. The temperature/voltage...

This is the Hot Racing Blue Aluminum Servo Saver for 23-25 Spline Servos. 23, 24, and 25 spline adapters are included, for use with servos from Futaba, Savox, Traxxas, Tactic, Hitec, JR, Spektrum,...

This is the Traxxas High-Voltage BEC and Receiver Box Set for use with the TRX-4 scale and trail crawler trucks. This BEC provides the power necessary to run high-voltage servos in the TRX-4. Traxxas...

This is the Traxxas 4-Cell AA Battery Holder with On/Off Switch for use to power the receiver and servos in nitro vehicles.FitsNitro 4-TecNitro RustlerNitro SlashNitro SportNitro...

This is the Traxxas Temperature Sensor Mount for Electric Motors when using the TQi Telemetry System. Includes: Mount, Plastic Tie, and Thermal Pad The temperature sensor

This is the Short RPM Sensor for Traxxas models. FeaturesThe RPM sensor plugs directly into your TQi receiver to provide real-time speed and RPM data while you drive. Real-time telemetry requires a...

This is the Traxxas Auto-Detectable Smart Temperature Sensor. This plug-and-play sensor is designed for use with the Traxxas 6550 Telemetry Expander. The auto-detectable temperature sensor plugs into...

This is a set of Traxxas LiPo Battery Charge Indicator Plug Set. The set includes four Green, four Blue, and four Grey indicator plugs. Use these plugs to know which batteries are fully charged,...

This is the Traxxas 4 AA Battery Holder for Receivers in Nitro vehicles like the Jato, Nitro Rustler, T-Maxx, and others. Jato 4 AA battery holder with Futaba-style connector. No On/Off switch...

This is the Long RPM Sensor from Traxxas. The RPM sensor plugs directly into your TQi receiver to provide real-time speed and RPM data while you drive. Real-time telemetry requires a telemetry...

This is the Spektrum WS3000T Wireless Simulator USB Dongle Wireless Simulator DongleThe Spektrum WS3000T Wireless Simulator Dongle (SPMWS3000T) is the easiest way to bridge your real-world flying...

This is the Spektrum Landing Assist Sensor (LAS) Module for use on airplanes such as the E-Flite Apprentice S 15e and HobbyZone Sport Cub S2 1.3m. Landing Assist Sensor for Smoother LandingsThe...

This is the Spektrum GPS Module, for use in airplanes like the Hobbyzone Carbon Cub S+, Sportsman S+, and E-Flite Opterra S+ 1.2m.  This can also be used to add SAFE Plus GPS technology to airplanes...

This is the Traxxas Servo Y-Connector for use with Dual-Servo Steering Setups when there is only one steering channel on the receiver. The Y-adapter allows you to connect two servos to a single...

These are the Traxxas Telemetry Trigger Magnet Holders for the TQi radio system. The telemetry trigger magnet holders secures the trigger magnet to the spur gear to provide real-time RPM and speed...

This is the Traxxas iD LiPo Battery Balance Adapter for Cell Voltage Checkers. This works with 2S, 3S, and 4S ID LiPo batteries to connect them to cell voltage checkers for individual cell reading...

This is the Traxxas LiPo cell voltage checker and balancer with the #2938X adapter for use with Traxxas iD batteries. This can be used to check cell voltages on 2S, 3S, and 4S Traxxas ID LiPo...

This is the Wire Retainer/Gear Cover for use with many Traxxas vehicles using the TQi telemetry system, including the Bandit, E-Maxx, Rustler, Slash 2WD, Stampede 2WD, Stampede 4x4, and X-Maxx...

This is the Traxxas High-Voltage Power Amplifier for the Traxxas Unlimited Desert Racer trucks. This is used to supply power to the accessory LED light kit for the UDR. Replacement high-voltage power...

This is the Traxxas Short Temperature and Voltage SensorThe temperature/voltage sensor plugs directly into your TQi receiver and power tap to provide real-time motor temperature and battery voltage...

This is the Racers Edge Glitch Buster Power Capacitor. These can be plugged into any open channel on your receiver to help reduce glitching caused by radio interference on your RC car, truck, or...

This is the Traxxas Black Antenna Tube with Cap and Wire Retainer.  These are compatible with nearly all Traxxas cars, trucks and boats.  The sleek black design looks great as well.

This is the Traxxas Auto-Detectable Smart Voltage Sensor.  The auto-detectable voltage sensor plugs into the optional TQi Telemetry Expander to provide real-time voltage data while you drive...

This is the RC4WD Wired Winch Control Unit offered to allow operation function from your radio and receiver. This will allow you to control a winch with your remotes third channel. This is...

These are the Traxxas Mounts for the RPM Telemetry Sensor for Nitro Engines. RPM sensor mounts allow you to mount an RPM sensor to your nitro engine. Includes<

This is the Traxxas LED Light Y-Harness for the Summit 1/10 truck, allowing power to get to the servos and LED lights.  This works on the Summit trucks with the TQ 2.4GHz radios system.

This is the Traxxas Telemetry Trigger Magnet for the Traxxas TQi Telemetry System. Replacement 5x2 mm telemetry trigger magnet.IncludesOne Telemetry Trigger Magnet for the Traxxas TQi Telemetry...

This is the Traxxas X-Maxx and XRT Temperature and Voltage Sensor.Accesory Part For X-Maxx XRT

This is the Temperature and Voltage Sensor for the XO-1 On-Road Car from TraxxasFeaturesFunctions with the Traxxas TQi Link system to display battery voltage and temperature.IncludesTemperature and...

This is the Traxxas

This is the Hot Racing Aluminum Double-Clamping Servo Horn for use with 25-Spline standard-shaft servos from Futaba, Traxxas, and Savox.FEATURES:Double lock clamp to give precise fit to lock on to...

This is the Traxxas Telemetry Expander Data Link Wire, used to connect the #6550X Telemetry Expander 2.0 to the #3485 VXL-6s or #3496 VXL-8s electronic speed control. Use this data link cable to...