Radio/Electronic Accesories

This is a replacement antenna tube. Antenna tubes are used to help secure and protect reciever antenna wires. INCLUDES:1 blue antenna tube and 1 black antenna tube cap. SPECIFICATIONS:Length: 11"Outside Diameter: 1/8"

This is the Traxxas Link Bluetooth Wireless Module for use with TQi radio systems having the a TQi logo with the blue letter "i" on the face. The wireless module works with Android (v4.4 OS and higher), iPhone (4S and newer), iPod touch (5th generation...

This is the Traxxas Phone Mount for Traxxas TQi and Aton Transmitters. The Transmitter Phone Mount provides a secure mounting base for your mobile device when using it for the Traxxas app.

This is the Realflight Transmitter Interface Adapter Cords. Adapter cord/cable set for use with the InterLink DX that will make it compatible with the trainer jacks on most Futaba plus all JR and Spektrum transmitters

This is the RealFlight Evolution RC Flight Simulator with InterLink DX Controller The most modern, feature-packed, and expandable RC flight simulator yet! For more than two decades, RealFlight has been the #1 RC flight simulator in the world! It's the...

This is Great Planes RealFlight Expansion Pack 4.RealFlight adds to the number of reasons why it's R/C's #1 flight simulator! Expansion Pack 4 software brings you 16 exciting aircraft and 4 amazingly realistic virtual flying sites to Real Flight G3, G3...

This is the RealFlight 9.5S Flight Simulator Software Only. RealFlight 9.5S adds more features to the #1 RC flight simulator in the world, including new aircraft, AMA Flying Site 4, and the benefits of being delivered exclusively via Steam – the...

This is a 4-pack of Reedy AA alkaline batteries. These are excellent for use in R/C transmitters, receivers and other electronic devices needing AA batteries.Includes: Four AA alkaline batteries

This is a Traxxas Large Servo Saver for Futaba, Hitec, Airtronics, and Traxxas servos.  This will work on most vehicles requiring a large servo saver. The servo saver protects your steering servo by absorbing shocks that might otherwise cause...

This is the Long Temperature and Voltage Sensor for the Traxxas TQi system. To read voltage on electric vehicles, this must be used with the Traxxas part TRA6541 Power Tap.FeaturesFunctions with the Traxxas TQi Link system to display battery voltage...

This is the Hot Racing Blue Aluminum Servo Saver for 23-25 Spline Servos. 23, 24, and 25 spline adapters are included, for use with servos from Futaba, Savox, Traxxas, Tactic, Hitec, JR, Spektrum, Sanwa, and KO servos.FEATURES:- CNC 6061-T6 aluminum...

This is the Traxxas Power Tap Connector For the TQi Telemetry setups on electric vehiclesNote: If your speed controller has a iD High Current Connector you will need to change the plug to a 1st generation High Current Connector. Part number 3070.

This is the Traxxas High-Voltage BEC and Receiver Box Set for use with the TRX-4 scale and trail crawler trucks. This BEC provides the power necessary to run high-voltage servos in the TRX-4. Traxxas recommends the High-Output BEC, or battery eliminator...

This is the replacement servo saver for the following Traxxas kits: Rustler and Stampede. The servo saver is spring loaded and has adaptors for both Futaba and Airtronics servos. Features White plastic construction Spring loaded Two...

This is the Traxxas 4-Cell AA Battery Holder with On/Off Switch for use to power the receiver and servos in nitro vehicles.FitsNitro 4-TecNitro RustlerNitro SlashNitro SportNitro StampedeS-MaxxSportmaxxT-Maxx 2.5T-Maxx 2.5RT-Maxx 3.3

This is the Traxxas Temperature Sensor Mount for Electric Motors when using the TQi Telemetry System.Includes: Mount, Plastic Tie, and Thermal Pad

This is the Short RPM Sensor for Traxxas models. FeaturesThe RPM sensor plugs directly into your TQi receiver to provide real-time speed and RPM data while you drive. Real-time telemetry requires a telemetry magnet, TQi radio with Traxxas...

This is the Traxxas Auto-Detectable Smart Temperature Sensor. This plug-and-play sensor is designed for use with the Traxxas 6550 Telemetry Expander.

This is a set of Traxxas LiPo Battery Charge Indicator Plug Set. The set includes four Green, four Blue, and four Grey indicator plugs. Use these plugs to know which batteries are fully charged, discharged, or in storage charge, and to protect the...

This is the Traxxas 4 AA Battery Holder for Receivers in Nitro vehicles like the Jato, Nitro Rustler, T-Maxx, and others. Jato 4 AA battery holder with Futaba-style connector. No On/Off switch.Includes: One 4 cell AA Battery Holder w/Receiver Connector...

This is the Long RPM Sensor from Traxxas. The RPM sensor plugs directly into your TQi receiver to provide real-time speed and RPM data while you drive. Real-time telemetry requires a telemetry magnet, TQi radio with Traxxas Link Wireless...

This is the Spektrum Landing Assist Sensor (LAS) Module for use on airplanes such as the E-Flite Apprentice S 15e and HobbyZone Sport Cub S2 1.3m. Landing Assist Sensor for Smoother LandingsThe Spektrum Landing Assist Sensor (LAS) is easy to install and...

This is the Spektrum GPS Module, for use in airplanes like the Hobbyzone Carbon Cub S+, Sportsman S+, and E-Flite Opterra S+ 1.2m.  This can also be used to add SAFE Plus GPS technology to airplanes like the Hobbyzone Carbon Cub 2S and E-Flite...

This is the Traxxas Servo Y-Connector for use with Dual-Servo Steering Setups when there is only one steering channel on the receiver.FeaturesFutaba J connectors (one male to go into the RX and two female to go to the servos)IncludesOne...

These are the Traxxas Telemetry Trigger Magnet Holders for the TQi radio system. The telemetry trigger magnet holders secures the trigger magnet to the spur gear to provide real-time RPM and speed data when combined with an RPM sensor, TQi radio with...

This is the Traxxas iD LiPo Battery Balance Adapter for Cell Voltage Checkers. This works with 2S, 3S, and 4S ID LiPo batteries to connect them to cell voltage checkers for individual cell reading. Warning: These are not intended for charging. The...

This is the Traxxas LiPo cell voltage checker and balancer with the #2938X adapter for use with Traxxas iD batteries. This can be used to check cell voltages on 2S, 3S, and 4S Traxxas ID LiPo batteries, and also to equalize the battery pack cells if...

This is the Wire Retainer/Gear Cover for use with many Traxxas vehicles using the TQi telemetry system, including the Bandit, E-Maxx, Rustler, Slash 2WD, Stampede 2WD, Stampede 4x4, and X-Maxx.FeaturesPlastic constructionBlack in colorIncludesWire...

This is the Traxxas High-Voltage Power Amplifier for the Traxxas Unlimited Desert Racer trucks. This is used to supply power to the accessory LED light kit for the UDR.Accessory Part ForUnlimited Desert Racer (UDR)

This is the Traxxas Sensor, temperature and voltage (short). This is Traxxas part number 6523Part Number: 6523 / TRA6523Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave Digger1/16 Kyle Busch Truck1/16...

This is the Racers Edge Glitch Buster Power Capacitor. These can be plugged into any open channel on your receiver to help reduce glitching caused by radio interference on your RC car, truck, or buggy. Compatible with Spektrum, Futaba, Hitec, Traxxas,...

This is the Traxxas Black Antenna Tube with Cap and Wire Retainer.  These are compatible with nearly all Traxxas cars, trucks and boats.  The sleek black design looks great as well.

This is the Frequency Checker Antenna for the Hobbico 72MHz Frequency Checker. FEATURES: Increases the operational range of the Frequency Checker to 1000ft (305m) maximum INCLUDES: One Hobbico 72MHz Frequency Checker Antenna REQUIRES: Plugging into...

This is the Traxxas Auto-Detectable Smart Voltage Sensor.  The auto-detectable voltage sensor plugs into the optional TQi Telemetry Expander to provide real-time voltage data while you drive. Real-time telemetry requires a TQi radio with Traxxas...

This is a package of two Ernst Security Clips for use with Futaba.  Ernst #115 Security Clip will hold your Futaba male/female radio connections firmly together.  This eliminates the danger of radio connections coming loose during flight.

This is the RC4WD Wired Winch Control Unit offered to allow operation function from your radio and receiver. This will allow you to control a winch with your remotes third channel. This is recommended for use with the RC4WD Warn 1/10 9.5cti Winch...

These are the Traxxas Mounts for the RPM Telemetry Sensor for Nitro Engines. RPM sensor mounts allow you to mount an RPM sensor to your nitro engine. IncludesThree different plastic mountsTwo plastic spacersTwo flat washersTwo split washersTwo hex socket...

This is the Traxxas LED Light Y-Harness for the Summit 1/10 truck, allowing power to get to the servos and LED lights.  This works on the Summit trucks with the TQ 2.4GHz radios system.

This is the Traxxas Telemetry Trigger Magnet for the Traxxas TQi Telemetry System.IncludesOne Telemetry Trigger Magnet for the Traxxas TQi Telemetry SystemSpecifications5mm x 2mm round magnetFor use with:1/10 E-Revo Brushed1/10 E-Revo Brushless1/10...

This is the Traxxas X-Maxx Temperature and Voltage Sensor.Accessory Part ForX-Maxx 6SX-Maxx 8S