This is the Traxxas Speed Bit 2-Piece Metric Ball Hex Driver Set with 1/4" drive.  This set includes 2.0mm and 2.5mm ball end bits.  The 1/4" drive makes these perfect for use with powered screwdrivers, or with the standard Traxxas Speed Bit...

This is the Traxxas Speed Bit 4-Piece Metric Hex Driver Set with 1/4" drive.  This set includes straight tip 1.5mm, 2.0mm, 2.5mm and 3.0mm end bits.  The 1/4" drive makes these perfect for use with powered screwdrivers, or with the standard...

This is the Traxxas Stub axles, rear, heavy duty (2)/pins (2). This is Traxxas part number 6853XPart Number: 6853X / TRA6853XFits1/10 Monster Jam Trucks1/10 RallyCraniacNitro SlashRustler VXLRustler XL-5SkullySlash 2WDSlash 2WD Ford RaptorSlash 2WD...

These are Traxxas 3x6mm Metal Washers. Each package includes 12 washers. Replacement part forDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0Ford F-150 RaptorFord Fiesta ST RallyHoss 4X4 VXLNitro SlashRustler 4X4 VXLRustler 4X4Slash 2WD...

These are Traxxas 2.5x31.5mm Stainless Steel King Pins with E-clips for the electric Rustler and Stampede. Replace the stock screw pins with these heavy-duty steel suspension pins that are stronger, fit more precisely, and pivot with less friction...

This is the Gen3 RC Complete 19-piece Rubber Sealed Ball Bearing Kit for Traxxas 1/10 Slash 2WD, Rustler 2WD, and Stampede 2WD trucks.  These will work in both XL-5 brushed and VXL brushless versions.These make a great upgrade to the stock...

This is the GPM Racing Blue Steel and Aluminum Front CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature steel axles and CVD joints, with the main shaft made of...

This is a Traxxas Revo 2.5 and 3.3 Forward Only Conversion Kit.  Because you eliminate the reverse gears, there is less rotating mass in the transmission, which lets the truck accelerate quicker.  This is a common option for...

These are the Traxxas Rustler 4x4 Talon Extreme Tires Mounted on Black Wheels. These are pre-glued with foam inserts installed, making them a direct bolt-on for the Rustler 4x4 trucks. High-performance all-terrain Talon EXT tires dig into dirt and grass...

This is the Traxxas Steel Top Drive Gear for the Stampede 2WD, Slash 2WD, Rustler, and Bandit vehicles.FitsBandit XL-5 & VXLRustler XL-5 & VXLSlash 2WD XL-5 & VXLStampede 2WD XL-5 & VXL

This is the Traxxas Rebuild kit (heavy duty), slipper clutch (steel disc/ aluminum friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1)) Includes aluminum friction pads (3), spring, pin, 5x8 washer, 4 mm locking nut, and 5 mm...

This is the Traxxas Blue Aluminum Turnbuckle set for the Rustler, Stampede 2WD, Stampede 4x4, and Slash 4x4 trucks.FEATURES: Anodized aluminum construction Blue in color Black nylon ball ends INCLUDES:Two 39mm front camber linksTwo 49mm back camber...

These are the Traxxas E-Revo 2 Machined Steel Drive Cups and 4x17mm Screw Pins (2). Each package includes two drive cups and two screw pins. Stock Replacement OnE-Revo 2.0

This is a bottle of ZAP-O Foam-Safe Odorless CA Glue. It is a 20-gram (0.7-ounce) bottle. Zap-O Foam Safe CA is a true odorless CA. It has the same gap filling properties as Zap-A-Gap CA+ but without the fumes. It works great on balsa, plywood, bass wood...

This is the Traxxas Titan 380 18-Turn Brushed Motor for use in Traxxas 1/16 scale vehicles like the 1/16 E-Revo, Summit, Slash 4x4, and Mustang.FEATURES 18 turns Used in Traxxas 1/16 scale vehicles INCLUDESOne Titan 380 Motor with 4mm bullet...

This is the AFX Low Bridge Support (3 Pack) Support your bridges with supports that work free standing. The articulated arm tilts up to 30° and can be removed to make a 1/2″ support. Raise Your Game…a LittleAFX track is famous for its...

This is the GPM Silver Aluminum 7075-T6 Front Steering Assembly FeaturesAdjust the Steering Performance of your truck IncludesSteering Assembly (1 set/3 pieces) - (3pcs)Bearing 5x8x2.5 - (4pcs) Note: This product is an upgraded version of SLA048 Replaces...

This is the GPM Red Aluminum 7075-T6 Front Steering Assembly FeaturesAdjust the Steering Performance of your truck IncludesSteering Assembly (1 set/3 pieces) - (3pcs)Bearing 5x8x2.5 - (4pcs) Note: This product is an upgraded version of SLA048 Replaces...

This is the GPM Black Aluminum 7075-T6 Front Steering Assembly FeaturesAdjust the Steering Performance of your truck IncludesSteering Assembly (1 set/3 pieces) - (3pcs)Bearing 5x8x2.5 - (4pcs) Note: This product is an upgraded version of SLA048 Replaces...

This is the GPM Blue Aluminum 7075-T6 Front Steering Assembly FeaturesAdjust the Steering Performance of your truck IncludesSteering Assembly (1 set/3 pieces) - (3pcs)Bearing 5x8x2.5 - (4pcs) Note: This product is an upgraded version of SLA048 Replaces...

This is the GPM Green Aluminum 7075-T6 Front Steering Assembly FeaturesAdjust the Steering Performance of your truck IncludesSteering Assembly (1 set/3 pieces) - (3pcs)Bearing 5x8x2.5 - (4pcs) Note: This product is an upgraded version of SLA048 Replaces...

This is a bottle of ZAP Foam Safe Kicker CA Accelerator Spray. It is a 2-ounce bottle. It is safe on most foam products, when used in conjunction with ZAP Foam Safe CA and is compatible with most other foam safe CA's. It works great on balsa, spruce,...

This is the RPM Single Spare Tire Carrier for Traxxas Slash 2WD and 4x4 trucks. This requires using an RPM rear bumper for the Slash 2WD or 4x4.Are you looking to bolt on a spare tire to your favorite short course truck but prefer the look of a single...

This is the Traxxas TQ 2.4GHz 3-Channel Micro Receiver for use with the TQ 2.4GHz transmitter. The TQ 2.4GHz micro receiver uses an integrated LINK button for fast and easy binding. A two-color LED indicates power-on and bind status for fool-proof...

This is a 1.75 oz bottle of Air Filter Oil from Traxxas. FEATURES:Used to treat foam air filter elements to increase their filtering capacity, and extend engine life.1.75 fluid ounce bottle provides oil for many applications, and is still small enough to...

This is the Viper Scale Racing V1 VSPEC Builders Kit with Pinned Rear Axle * This chassis has the Rear Axle Pinned for greater performance You asked for it and Viper listened. The all new V1 VSPEC builders kit is here! Featuring all components to build...

This is the Viper Scale Racing V1 VSPEC Builders Kit You asked for it and Viper listened. The all new V1 VSPEC builders kit is here! Featuring all components to build your own V1 VSPEC. Over $70 value. This is the first builders kit release. The VSPEC...

This is the AFX High Bridge Support (3 Pack) Support your bridges with supports that work free standing or clamped onto a ground level track. The articulated arm tilts up to 30° and can be removed to make a 1/2″ support. Raise Your GameAFX...

This is the AFX 4 Lane Bridge Support (4 Pack) Fully adjustable, multi-level support easily works with any AFX track. Stackable columns will lift or lower your track while cross-members attach to it to withstand even the wildest of races. Raise Your...

This is the Pioneer Mustang 390 GT Santa's 'Stang (Sugarplum Purple) - Christmas Edition 1/32 Slot Car 2018 Pioneer Christmas Cars - Mustang 390 GT Limited Edition For 2018, it is reassuring to know that all Christmas gifts will be delivered on time...

This is the Pioneer Mustang 390 GT Santa's 'Stang (Tinsel Blue Metallic) - Christmas Edition 1/32 Slot Car 2018 Pioneer Christmas Cars - Mustang 390 GT Limited Edition For 2018, it is reassuring to know that all Christmas gifts will be delivered on time...

This is the Pioneer 'Santa's Charger' North Pole Racing Team - HEMI 426 Charger (Green/White) 1/32 Slot Car 2022 Pioneer Christmas Cars - Limited Edition For this years Lapland Championship, Santa Claus has been racing his trusty HEMI Charger onseveral...

This is the Pioneer 'Santa's Charger' North Pole Racing Team - HEMI 426 Charger (Red/White) 1/32 Slot Car 2022 Pioneer Christmas Cars - Limited Edition For this years Lapland Championship, Santa Claus has been racing his trusty HEMI Chargeron several...

This is the Pioneer 1934 Ford Coupe Legends - Green/White - The Legends of Christmas - Santa Special 1/32 Slot Car 2021 Pioneer Christmas Cars - Limited Edition Ford Legends!  The Legends of Christmas! It’s a retro ride for Santa this year. A...

This is the Pioneer Chevy Legends - #25 Buttermilk White - The Legends of Christmas - Santa Special 1/32 Slot Car 2021 Pioneer Christmas Cars - Limited Edition Santa Legends Racer! It’s retro ride for Santa this year. A fabulous customised 1937...

This is the Pioneer Santa Legends Racer - 1937 Dodge Coupe - Red/White 1/32 Slot Car 2021 Pioneer Christmas Cars - Limited Edition Dodge Legends!  The Legends of Christmas! It’s another retro ride for Santa this year. A customised 1937 Dodge...

This is the Pioneer Santa Legends Racer - 1937 Dodge Coupe - Gold/White 1/32 Slot Car 2021 Pioneer Christmas Cars - Limited Edition Dodge Legends! The Legends of Christmas! It’s another retro ride for Santa this year. A customised 1937 Dodge Coupe...

This is the Pioneer Santa Legends Racer - 1937 Dodge Coupe - Green/White 1/32 Slot Car 2021 Pioneer Christmas Cars - Limited Edition Dodge Legends! The Legends of Christmas! It’s another retro ride for Santa this year. A customised 1937 Dodge Coupe...

This is the Futaba R304SB-E 4-Channel 2.4GHz T-FHSS S.BUS2 Telemetry Receiver for electric RC vehicles.Features Only for use with electric powered RC vehicles (do not use with glow or gasoline powered vehicles) Telemetry data can be displayed and...

These are the Hot Racing Heavy-Duty Threaded Aluminum Shocks for Traxxas E-Revo 2.0, Revo 3.3, 1/10 E-Revo Brushed & Brushless, and 1/10 Summit trucks.These can be used in place of Traxxas part 5460, 5460A, 5460R, and 5460X shocks.Features- Threaded...