These are the Pro-Line Pomona Drag Spec 2.2/3.0 Black Wheels for Traxxas Slash 2WD Rear & Slash 4x4 Front/Rear (2) with 12mm Hex. Pair these with Pro-Line Hoosier Drag Slick tires for incredible looks and performance!Wheel Features: SC 2.2"/3.0" Rear...

This is a set of four Traxxas Blue-Anodized Aluminum 4mm Lock Nuts with a Flanged and Serrated surface. Lightweight and great looking, these 4 mm anodized aluminum flanged lock nuts are the perfect finishing touch for your vehicle. The serrated flange...

This is the Traxxas Receiver Switch Harness with Charge Jack for Traxxas Nitro vehicles like the T-Maxx 2.5 and 3.3, Nitro 4-Tec, Nitro Rustler, and Nitro Stampede.FitsNitro 4-TecNitro RustlerNitro SportNitro StampedeS-MaxxSportmaxxT-Maxx 2.5T-Maxx 2...

This is the Traxxas XRT Rear (Lower) Bulkhead Includes(4) Steel Motor Mount Washers(4) 4x18mm BCS Replacement Part ForXRTXRT Ultimate

This is the Traxxas X-Maxx Rear (Upper & Lower) Bulkhead Replacing Parts #7727 & #7728 Requires: #5108 Ball Bearings (2) Includes(4) Steel Motor Mount Washers(4) 4x18mm BCS Replacement Part ForX-MaxxX-Maxx Ultimate

This is a set of Traxxas Black 5mm Flanged Steel Serrated Nylon Locking Nuts (8) Set of eight 5 mm black flanged serrated steel nylon locking nuts Accessory Part ForMaxx SlashMaxxUnlimited Desert Racer

This is the Traxxas X-Maxx 8S Rear Upper and Lower Bulkhead for trucks using the Center Differential (all 8S X-Maxx).This will not fit the 6S version without upgrading to the center diff design.FitsX-Maxx 8S

This is the RPM Black Wide Front Bumper for the Traxxas electric Rustler, electric Stampede 2WD, Bandit, Nitro Rustler, and Nitro Stampede trucks. At over six inches wide, this offers the ultimate in protection for your ride!Give your favorite Traxxas...

This is the Racers Edge Crazy Strong Tire Glue 20g w/Pin Cap and Tips   Includes(1) 20ml Bottle of Racers Edge Tire Glue

This is the Gen3 RC Complete 21-Piece Rubber Sealed Ball Bearing Kit for Traxxas Rustler 4x4, Stampede 4x4, and 1/10 Slash 4x4 trucks, including Slash 4x4 Ultimate and Slash 4x4 Platinum.Features Super durable black rubber seals offer excellent...

This is the Traxxas 400 Digital High-Torque Brushless Metal Gear Ball Bearing Waterproof Servo. With 400 oz/in of torque, this is an awesome upgrade for Traxxas 1/10 bashers and off road vehicles like the UDR, Slash, Stampede, Rustler, and E-Revo trucks...

This is the Pro-Line Pro-Bond Tire Glue with Applicator Tips. Pro-Line knows tires and understands that the strongest bond possible between the Tire and Wheel is a critical aspect of performance and tire longevity. Pro-Line engineers have developed the...

This is the Traxxas E-Revo 2 Roof Body Skid Plate with 3x12mm Capscrews (4).Stock Replacement OnE-Revo 2.0

This is the Traxxas 4mm Nylon Locking Wheel Nuts (8) Set of eight 4 mm nylon locking nuts feature a serrated flange to keep them snug on the wheel during intense action FEATURES Steel serrated construction SPECSOutside diameter: 7mm Replacement Part...

This is a 48P, 83T Spur Gear for models with Traxxas Torque Control Slipper Clutch. FEATURES:48 pitch83 toothDesigned for models with a slipper clutch.Black plastic construction INCLUDES:One spur gear SPECS:Pitch:   48Tooth:   83

These are the JConcepts Renegades Blue Compound Monster Truck Tires and Foam Inserts (2). These soft-compound tires are recommend for grass, dirt, and lower speed running. They will expand under higher speed use.Fits - JConcepts #3377 2.6 x 3.6" MT...

This is the Traxxas 2-Amp Wall Charger and 3000mAh 7-Cell 8.4V Flat Pack Battery Completer Set. This set is perfect to go with vehicles like the Slash 2WD, Slash 4x4 VXL, 1/10 Rally, TRX-4, and 4-Tec 2.0 vehicles.Includes:3000mAh 7-Cell NiMH ID Flat...

This is a set of Traxxas 30-Degree Blue Caster Blocks for the Traxxas Rustler XL-5, Rustler VXL, Stampede XL-5, Stampede VXL 2WD, Slash XL-5, Slash VXL 2WD, Nitro Slash. Traxxas aluminum caster blocks improve the appearance, ruggedness, and control...

This is the Traxxas 13-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear. The heavy-duty 13-tooth (32-pitch) pinion gear is machined...

This is the Hot Racing Super Duty Slipper Clutch for Traxxas Slash 4x4, Stampede 4x4, 1/10 Summit, E-Maxx, E-Maxx Brushless, 1/10 E-Revo, 1/10 E-Revo Brushless, 1/10 Rally VXL, Revo 3.3, Slayer Pro 4x4, and T-Maxx 3.3 trucks. This replaces the Traxxas...

This is the Traxxas Big Bore Shock Set for all 1/10 Scale Slash 2WD, Slash VXL, and Slash 4x4 Short-Course Trucks. These replace the plastic shocks that come stock with the truck. Big Bore shocks provide optimal bump and jump control for your Traxxas...

These are the Traxxas 5x11x4mm Black Rubber Sealed Ball Bearings (2). Each package includes two bearings.Pair of 5x11x4 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal bearings offer an even tighter seal for ultimate...

This is the optional Assembled Wheelie Bar for all versions of the Traxxas Revo. The accessory Revo wheelie bar is easy to install for controlled wheelies on demand with a unique quick release design. Four snap-in adjustment positions allow you to choose...

This is the Traxxas 11-Tooth Rear HD Differential Pinion Gear. This must be used with the #7792 35-tooth diff ring gear.FitsX-MaxxXRT

This is a pair of Traxxas 5x8x2.5mm Blue Rubber Sealed Ball Bearings. These fit a large number of Traxxas 1/10 and 1/16 scale vehicles.Includes: (2) 5X8mm ball bearingsSpecificationsInside diameter: 5mmOutside diameter: 8mmWidth: 2.5m

This is the Titan 550 Motor (21-Turn) for the Traxxas E-Maxx and E-Revo Trucks. Features: Fan-cooled 21 turns 14 volt Bullet connectors Includes:One Titan 550 motor Specifications:Length to end of armature: 78mm (3.07")Diameter of can: 37mm (1...

This is the spur gear (or main gear) for the Traxxas Nitro Rustler trucks. Includes:One 70 tooth gear Features:Tough nylon constructionDrilled for light weight Specs:Teeth-70Pitch-32 Requires:Nothing, this is a direct replacement part. Comments:This is...

These are the Pro-Line Pomona Drag Spec 2.2" Black Front Wheels for Traxxas Slash 2WD Drag Racing builds. These are designed for use with 2.2" buggy-size tires, such as Pro-Line's Hoosier Drag tire for incredibly realistic looks!Features:2.2" Front...

This is the RPM Black Rear Bumper/Wheelie Bar Mount for the Traxxas Slash 2WD, Rustler, Stampede 2WD, and Bandit vehicles.After hearing numerous requests to look into the rear bumper mount on the Traxxas Slash, we found several issues that could use the...

This is the Long Temperature and Voltage Sensor for the Traxxas TQi system. To read voltage on electric vehicles, this must be used with the Traxxas part TRA6541 Power Tap. The temperature/voltage sensor plugs directly into your TQi receiver and power...

This is the Pro-Line 1978 Chevy C-10 Race Truck Clear Body for 1/10 Short Course Trucks like the Traxxas Slash 2WD & 4x4.The body is supplied clear, but is painted in the image to better show the design. Truck is not included.Pro-Line now has the...

This is the GPM Racing Blue Aluminum Adjustable Rear Stub Axle Stabilizer and Tie Rod Set for Traxxas 4-Tec 2.0 cars. These are machined from 6061-T6 aluminum for strength and durability, then anodized for a fantastic appearance. Stainless steel...

This is the Hot Racing Blue Aluminum Servo Saver for 23-25 Spline Servos. 23, 24, and 25 spline adapters are included, for use with servos from Futaba, Savox, Traxxas, Tactic, Hitec, JR, Spektrum, Sanwa, and KO servos.FEATURES:- CNC 6061-T6 aluminum...

This is the Hot Racing Pro Connector Soldering Jig. This tool is ideal for soldering and all types RC connectors. The jig quickly and securely clamps, holds, and releases these connectors for your soldering tasks.Jig clamp holds the most RC connectors,...

These are the GPM Racing Black Aluminum Brake Disks with +3mm Offset Hex for Traxxas Unlimited Desert Racer trucks. These feature a silver disk surface for ultra-realistic looks. Made of 6061-T6 aluminum and anodized with a color finish, these look...

These are the RPM Blue Front Bearing Carriers / Steering Blocks for Traxxas Slash 2WD, Nitro Slash, Rustler XL-5 & VXL, Stampede 2WD XL-5 & VXL, Skully, Craniac, and Bigfoot trucks. These replace Traxxas 3736 steering blocks, and require using...

This is the X-Maxx 17-Tooth Pinion Gear with 1.0 Mod Pitch and a 5mm Shaft Bore. 17-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model...

This is Z-Poxy Finishing Resin from Pacer. Specially formulated to have excellent bonding characteristics with fiberglass, wood and foam, Z-Poxy finishing resin is a must-have accessory for many workshops. It has a working time of 20-30 minutes,...

This is a package of replacement Traxxas 5x8mm Teflon Washers  Set of 20 PTFE-coated 5x8x0.5 mm washers for use with bearings. FEATURES:Black teflon construction.Used on the axles and in the transmission. INCLUDES: Set of 20 PTFE-coated 5x8x0.5 mm...

These are the Traxxas Unlimited Desert Racer BFGoodrich Baja KR3 Tires and Foam Inserts (2). Replica BFGoodrich KR3 Tires duplicate the 40" treads used on desert racing trucks for the Unlimited Desert Racer. Designed to fit 8471Method Racing Wheels. Sold...