This is the Hot Racing Hardened Steel Splined Center CVD Driveshaft for Traxxas E-Revo 2.0, 1/10 E-Revo Brushed & Brushless, and 1/10 Summit trucks. These beefed up shafts are a must for these high-powered monsters!On the E-Revo 2.0, this replaces parts...

These are the RPM Blue Front Right Suspension A-Arms for Traxxas E-Revo 2.0 trucks. While Traxxas may have beefed up the E-Revo 2.0 suspension arms, they’re still not nearly as tough as RPM versions, nor are they as light. RPM A-arms weigh in 5 grams per...

This is a set of four Traxxas Red Aluminum 5mm Flanged Serrated Nylon Locking Nuts Lightweight and great looking, these 5 mm anodized aluminum flanged lock nuts are the perfect finishing touch for your vehicle. The serrated flange and nylon locking...

This is the Traxxas Water Cooling Tubing (1-meter) Replace your broken cooling lines with this water cooling tubing. 1 meter length. Replacement Part ForDCB M41 WidebodyDisruptorSpartan SRSpartan

This is the Traxxas 29-Tooth 48-Pitch Pinion Gear with Set Screw. This can be used with the the 4-Tec 2.0 VXL, or any other vehicle requiring a 29T 48-pitch pinion gear.Fits4-Tec 2.0 VXL

This is the DuBro Tru-Spin propeller balancer for R/C applications. The DuBro Tru-Spin Prop Balancer is the most precise balancer on the market. It is perfect for air props of all sizes and weights, boat props, spinners, car wheels, heli rotor heads,...

This is a set of Traxxas 10x15mm Ball Bearings for use on the Traxxas Revo and other vehicles. Features: Steel Construction Shielded with blue rubber seals Includes: Two Ball Bearings Specifications:Inner Diameter: 10mmOuter Diameter: 15mmSide...

This is a pair of optional Front A-Arms for the Traxxas Electric Stampede and Rustler. FEATURES Composite nylon construction, black in color Direct fit hop-up requires no model modification for installation INCLUDESTwo Front...

These are the RPM Black Heavy Duty Front/Rear Suspension A-Arms for the Traxxas Slash 4x4, Rustler, 4x4, Hoss 4x4, Stampede 4x4, and 1/10 Rally vehicles. These arms are everything you've come to expect from RPM, and more!Take a look at what's been...

These are the Traxxas Tubes Lightweight Aluminum Turnbuckles and Adjustment Wrench for the Traxxas Revo 2.5, 3.3, 1/10 E-Revo, E-Revo Brushless, and Summit trucks. These will work on the front or rear of the truck.Features: 30% lighter than stock...

This is the Tekno RC Big Bone Driveshaft and Outdrive Set for the Traxxas Hoss 4×4 and Rustler 4x4 trucks. These will solve the many issues associated with the stock center driveline. First off it's FAT! Yet its still extremely lightweight...

This is the TEKNO RC Big Bone Center Driveshaft (Shaft Only) for the Slash 4x4 The Tekno RC Big Bone Driveshaft for the Slash 4×4 solves the many issues associated with the stock center driveline. First off it’s FAT! Yet it’s still...

These are the Pro-Line Prime 2.8" Tires on Black Raid 6x30 Front or Rear Adjustable Offset Wheels (2) with 12mm hex. The removable hex design makes these super versatile, and easy to repair should you damage a hex. These can be used with Traxxas 2WD...

This is the Traxxas Front and Rear Adjustable Body Mount Post Set. Front and rear adjustable body mounts with body posts. Includes(4) 2.5x18 mm screw pins Replacement Part ForBigFootDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0 Accessory...

This is the Tekno RC Big Bone Driveshaft and Outdrive Set for the Traxxas Slash 4×4 trucks. These will solve the many issues associated with the stock center driveline. First off it's FAT! Yet its still extremely lightweight.It's a dog bone rather...

This is the RPM Black Caster Block Set for the Traxxas Slash 2WD, electric Rustler, electric Stampede 2WD, and Nitro Slash trucks. These replace Traxxas part 3632.RPM Caster Blocks for the Traxxas Slash 2wd, nitro Slash, electric Rustler & electric...

This is the Integy MSR9 Rear Piggyback Shock Set for the Traxxas Stampede, Rustler and Slash FEATURES Aluminum Construction Threaded Aluminum Shock Bodies Piggyback Shock Oil Reservoir Knurled Spring Rate Adjuster Silver in Color Aluminum...

This is the Hot Racing Traxxas E-Revo 2.0 Steel and Aluminum Heavy-Duty Splined CVD Driveshaft and Axle Set. These work on the front or rear of the E-Revo 2.0. Each package includes two shafts, so two packages are required to complete both the front...

These are the RPM Blue Front Left Suspension A-Arms for Traxxas E-Revo 2.0 trucks. While Traxxas may have beefed up the E-Revo 2.0 suspension arms, they’re still not nearly as tough as RPM versions, nor are they as light. RPM A-arms weigh in 5 grams...

This is the GPM Racing Black Aluminum 25T Spline Clamping Servo Horn and Spring Steel Turnbuckle Link for Traxxas Rustler 4x4, Slash 4x4 low-CG, and 1/10 Rally vehicles. These are durable, look great, and offer easy adjustment.This servo arm is designed...

This is the RPM Black Front Bumper and Skid Plate Set for the Traxxas Slash 2WD and Nitro Slash short course trucks. This setup is almost a full ounce lighter than stock!Our two-piece front bumper for the Traxxas Slash 2WD & Nitro Slash is simple,...

This is the RPM Toe-In Gauge. Our Toe-In gauge allows you to do track-side checks of the toe-in without removing the wheels! Our gauge checks toe through the simple method of comparing the distance between the wheels at the rear of the tire to the...

This is the GPM Racing Complete Silver Aluminum Steering Tie Rod and Suspension Pushrod Set for Traxxas 1/16 E-Revo and 1/16 Summit trucks. Made of 6061-T6 aluminum and then anodized to make them pop, these will add strength and good looks to your 1/16...

This is the GPM Racing Complete Orange Aluminum Steering Tie Rod and Suspension Pushrod Set for Traxxas 1/16 E-Revo and 1/16 Summit trucks. Made of 6061-T6 aluminum and then anodized to make them pop, these will add strength and good looks to your 1/16...

This is the Pro-Line 1978 Chevy K-10 Clear Body for 12.3" Wheelbase 1/10 Scale Crawlers and Trail Trucks.The body is supplied clear, but is painted in the image to better show the design. Truck is not included.Features Fully Licensed 1978 Chevrolet K-10...

This is the Futaba 3PV 3-Channel Radio System with R203GF Receiver.Hold the 3PV in your hand, and instantly feel how lightweight it is. Access the programming menu on the easy-to-read screen, and see how sophisticated it is. Experience the 3PV's...

This is the GPM Racing Complete Gunmetal Aluminum Steering Tie Rod and Suspension Pushrod Set for Traxxas 1/16 E-Revo and 1/16 Summit trucks. Made of 6061-T6 aluminum and then anodized to make them pop, these will add strength and good looks to your...

This is the Traxxas High-Voltage BEC and Receiver Box Set for use with the TRX-4 scale and trail crawler trucks. This BEC provides the power necessary to run high-voltage servos in the TRX-4. Traxxas recommends the High-Output BEC, or battery eliminator...

This is the Traxxas 4-Tec 2.0 70-Tooth 48-Pitch Spur Gear. This 70T gear will fit all versions of the 4-Tec 2.0, including the Ford GT and Mustang GT.Stock Replacement On4-Tec 2.0 VXL Chassis4-Tec 2.0 XL-5 Chassis4-Tec 2.0 Ford GT4-Tec 2.0 Ford Mustang

This is a Traxxas Steel Slipper Clutch Shaft for the Slash, Rustler, and Stampede vehicles. Features: Steel construction Roll pin pre-installed Includes: One slipper clutch set Specifications:Length: 1.98" (50mm)Diameter: .21" (5mm)

This is the Traxxas Reverse Rotation Titan 550 Motor (21-Turn).  The Titan 550 reverse-rotation motor is a 21-turn fan-cooled 550 size powerhouse capable of handling 14.4 volts. This powerful motor has a 30% longer armature than a standard 540 size...

These are the Traxxas Red Aluminum Wheelie Bar Wheels and Rubber Tires for the Traxxas Wheelie Bars (model 4975 and 3678) for all Traxxas T-Maxx, E-Maxx, Jato, Slash 2WD, Slash 4x4, Rustler, Stampede 2WD, Stampede 4x4, and Bandit series vehicles.Traxxas...

This is the Hitec RDX2 1000 AC/DC Dual Port Charger/Power Supply With a sleek modern design and easy-to-transport handle, the RDX2 1000 is the AC/DC powerhouse you need to charge your high-capacity battery packs at rapid rates. The dual output ports each...

These are the Pro-Line Trencher LP 2.8 Low Profile Tires on Black Raid 6x30 Front or Rear Adjustable Offset Wheels (2). The removable hex design makes these super versatile, and easy to repair should you damage a hex. These can be used with Traxxas...

These are the Traxxas E-Revo 2 Black 17mm Splined Hex 3.8 Wheels (2).Stock Replacement OnE-Revo 2.0

This is the Traxxas TRX-4 Chrome Differential Cover. This will fit the front and rear diffs on the TRX-4 trucks.Stock Replacement OnTRX-4 Ford BroncoAccessory Part ForTRX-4 Crawler KitTRX-4 Land RoverTRX-4 SportTRX-4 Tactical

This is a pair of RPM Blue Upper and Lower Suspension A-Arms for the Traxxas X-Maxx 6S and 8S trucks. This includes one upper and one lower arm. The upper arm replaces Traxxas part 7729, and the lower arm can be used in place of Traxxas part 7730 or 7731...

This is the Integy Silver MSR9 Front Piggyback Shock Set for the Traxxas Stampede, Rustler and Slash FEATURES Aluminum Construction Threaded Aluminum Shock Bodies Piggyback Shock Oil Reservoir Knurled Spring Rate Adjuster Silver and Gun Metal in...

This is the GPM Racing Blue Aluminum Complete Turnbuckle Tie Rod and Camber Link Set for Traxxas 4-Tec 2.0 cars. These are machined from 6061-T6 aluminum for strength and durability, then anodized for a fantastic appearance.This set replaces all of the...

This is a set of GPM Racing Orange Aluminum 17mm Wheel Nuts for Traxxas X-Maxx and E-Revo 2.0 trucks. This is a full set of four nuts.These fit in place of stock Traxxas part 7758 series wheel nuts.Accessory Part ForTraxxas 1/10 E-Revo 2.0Traxxas...