This is the Traxxas aluminum blue-anodized shock caps Aluminum shock caps are great way to boost the durability and style of any Traxxas vehicle equipped with Ultra Shocks. The machined caps fit precisely and hold tightly, run after run, jump after jump...

This is the Hitec JST-XH Balance Board for X2 and X4 Hitec Chargers. This will work with the X2, X4 DC, and the X4 Plus AC/DC chargers. It has XH balance plugs for 2S, 3S, 4S, 5S, and 6S batteries.FEATURESBalance lead and ports for 2-6S LiPo battery...

This is a set of 12 Traxxas 3mm Locking Nuts. These feature chrome nylon locking nuts. Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 SummitBandit VXLBIGFOOT No. 1 Officially Licensed ReplicaDCB M41 WidebodyDrag Slash 1967 Chevrole C10...

This is the Traxxas Stinger 20-Turn 540 size motor used in many Traxxas vehicles. This can be used in the Bandit XL-5, Stampede XL-5, Rustler XL-5, Monster Jam Replicas, Blast Boat, and others.Features:20-Turn high performance 540 motorPre-installed...

These are the Traxxas Steel Constant Velocity Driveshafts for the Traxxas T-Maxx 3.3, Revo 3.3, E-Maxx 16.8V and E-Maxx Brushless, E-Revo and E-Revo Brushless trucks.   Traxxas Steel Constant Velocity Driveshafts are designed to handle the extreme...

This is the Traxxas Stock replacement EZ-Start Motor for the EZ-Start (original) System. This motor is what turns the engine over in order to start it.  This is for the original EZ-Start system, which was used on vehicles...

This is the HS-85MG Mighty Micro Metal-Geared Servo from Hitec.  It has a universal connector so it will work with JR, Futaba, and the new style Airtronics.  This produces 41.66 oz/in of torque at 4.8V, and 48.6 oz/in at 6V. FEATURES:...

This is the Viper Scale Racing (YELLOW) VSPEC w/ V17 Body Ready to Race HO Slot Car NEW Look for the 917 VSPECThe VSPEC race car is a reliable, fast and fully up-gradable HO Scale Slot car built with high performance parts. Many features on the VSPEC RTR...

These are the GPM Racing Stainless Steel Tube Chassis Panels for the Front and Wheel Well locations on Traxxas Unlimited Desert Racer trucks. Made of 0.5mm stainless steel with a textured finish for a realistic appearance, these are an excellent...

This is the GPM Racing Black Hardened Steel Rear CVD Driveshaft Set for Traxxas 4-Tec 2.0 cars. Made from #45 hardened steel, these shafts are built to withstand a hot rod 4-Tec 2.0 setup.These can be used as an upgrade for Traxxas part 8351, 8354, or...

This is the Traxxas 2075X Digital High-Torque Metal Gear Waterproof Ball Bearing Servo. This is the stock steering servo on the TRX-4 Trail Crawler. It can be used as an upgrade for any 1/10 Traxxas vehicle currently running a standard 2075 servo. The...

These are the RPM Red Front or Rear Suspension A-Arms for Traxxas Slash 4x4, Rustler 4x4, Hoss 4x4, Stampede 4x4, and 1/10 Rally VXL cars and trucks.RPM A-arms for the Traxxas Slash 4x4 , Rustler 4x4 Hoss 4x4 and Stampede 4x4 are everything you've come...

This is the Traxxas 4-Cell AA Battery Holder with On/Off Switch for use to power the receiver and servos in nitro vehicles.FitsNitro 4-TecNitro RustlerNitro SlashNitro SportNitro StampedeS-MaxxSportmaxxT-Maxx 2.5T-Maxx 2.5RT-Maxx 3.3

These are the RPM Blue Heavy Duty Front/Rear Suspension A-Arms for the Traxxas Slash 4x4, Rustler 4x4, Hoss 4x4, Stampede 4x4, and 1/10 Rally vehicles. These arms are everything you've come to expect from RPM, and more!Take a look at what's been done:RPM...

This is the Tuned Spring Set for the Integy MSR9 Shock Set used on the Traxxas Stampede, Rustler, Slash and Bandit. FEATURES Color of spring corresponds to amount of dampening effect Enables shock to properly react to different track...

This is the Integy Blue MSR9 Front Piggyback Shock Set for the Traxxas Stampede, Rustler and Slash FEATURES Aluminum Construction Threaded Aluminum Shock Bodies Piggyback Shock Oil Reservoir Knurled Spring Rate Adjuster Blue and Gun Metal in...

This is the optional .8 Metric Pitch 68 Tooth Spur Gear for the Traxxas E-Maxx. FEATURES:Nylon construction, black in color .8 metric pitch INCLUDES:One 68T 0.8 metric pitch spur gear REQUIRES:Installation on the vehicle SPECS:Diameter: 2.16"...

This is the Traxxas 1200mAh NiMH 5-Cell 6-Volt Hump Pack Receiver Battery for Traxxas Nitro vehicles.  This high quality 5-cell hump pack uses proven nickel-metal hydride cells and is rated at 1200mAh.  Fully charged, it provides about 1 hour...

This is the Viper Scale Racing (BLUE) VSPEC w/ V17 Body Ready to Race HO Slot Car NEW Look for the 917 VSPECThe VSPEC race car is a reliable, fast and fully up-gradable HO Scale Slot car built with high performance parts. Many features on the VSPEC RTR...

This is the RPM Blue Front Bulkhead for Traxxas 2WD trucks, including the Slash 2WD, Nitro Slash, Rustler, Nitro Rustler, Stampede 2WD, Skully, Craniac, Bigfoot, Nitro Stampede, and Bandit trucks and buggies.This part is a direct replacement for Traxxas...

These are the Traxxas 4-Tec 2.0 Extra Wide Rear Response 1.9 Tires Pre-Mounted on Black Chrome Wheels (2). These are stock replacements for the 4-Tec 2.0 Ford GT, Mustang GT, and XL-5 brushed chassis. Recommended for use on brushed motor setups only...

This is the Traxxas Premium High-Performance Grease (20cc) for use with X-Maxx trucks. This is a must-have item for X-Maxx truck owners. 20 cc tube of high performance premium grease

This is a set of Traxxas Long Rod Ends with Hollow Ball Connectors. Each package contains six rod ends and six hollow balls.Fits1/10 Monster Jam Trucks1/10 RallyBandit XL-5CraniacE-MaxxNitro 4-TecNitro RustlerNitro SlashNitro SportNitro StampedeRustler...

This is a Traxxas 48P, 86T Spur Gear for models with Torque Control Slipper Clutch. FEATURES:48 pitch86 toothDesigned for models with a slipper clutch.Black plastic construction INCLUDES:One spur gear SPECS:Pitch:   48Tooth:   86

This is a pair of the Traxxas Rear All Star Black Chrome Wheels with Anaconda Tires for vehicles like the Stampede and Rustler XL-5 and VXL. FEATURES:Black chrome plated plastic, five spoke designSplit X-Pattern tread tires with foam inserts INCLUDES:One...

This is the Hitec HS-755MG Giant Scale Metal-Geared Dual Ball-Bearing Servo.  This servo has the universal connector, so it will work with all current JR, Hitec, Futaba, and Airtronics Z radio systems and wiring.  This produces nearly 200 oz/in...

This is the Viper Scale Racing (WHITE) VSPEC w/ V17 Body Ready to Race HO Slot Car NEW Look for the 917 VSPECThe VSPEC race car is a reliable, fast and fully up-gradable HO Scale Slot car built with high performance parts. Many features on the VSPEC RTR...

These are the Pro-Line 1.9 XL Dual Stage Closed Cell Rock Crawler Tire Foam Inserts. Pro-Line is proud to introduce our next generation of Rock Crawling Performance Foam Inserts: the all-new 1.9" Dual Stage Closed Cell Inner/Soft Outer Foam! Pro-Line's...

These are the Traxxas Unlimited Desert Racer Paddle Tires on Desert Racer Wheels (2). Add these do your truck for the ultimate experience on the dunes, beach, or snow! The tires come pre-mounted on the wheels with foam inserts installed.Accessory Part...

These are the Traxxas TRX-4 Crawler Front and Rear Bumper Mounts with Screw Pins.FitsTRX-4

This is a pair of Traxxas Bandit Anaconda 2.2" Front Street Tires with Foam Inserts for the Bandit XL-5 and VXL buggies. These are a soft-compound tire, providing excellent grip for running the Bandit on hard surfaces.FEATURES:Rubber Anaconda tiresSplit...

These are the RPM Blue Extended Right Rear A-Arm Set for 1/10 Summit (stock replacement), E-Revo 2.0 (stock replacement), 1/10 E-Revo, E-Revo Brushless, and Revo 3.3 trucks. These are replacements for Traxxas part 5333R or 8631. See Tech Notes at...

These are the RPM Blue Extended Left Rear A-Arms for 1/10 Summit (stock replacement), E-Revo 2.0 (stock replacement), 1/10 E-Revo, E-Revo Brushless, and Revo 3.3 trucks. These are replacements for Traxxas part 5333R or 8632. See Tech Notes at bottom...

This is the Traxxas Temperature Sensor Mount for Electric Motors when using the TQi Telemetry System. Includes: Mount, Plastic Tie, and Thermal Pad The temperature sensor mount secures the temperature sensor to your electric motor with a thermal pad and...

These are the Traxxas Steel Driveshafts for the Traxxas 1/16 scale 4x4 vehicles, including the 1/16 E-Revo, 1/16 Summit, 1/16 Slash 4x4, 1/16 Rally, 1/16 Fiesta, and 1/16 Boss 302 Mustang VXLSteel Constant Velocity Center Driveshafts are designed to...

This is a Team Integy Aluminum Motor Heatsink with Cooling Fan (Blue) for the Traxxas Slash 2WD, Stampede 2WD, Rustler and Bandit vehicles. This will only fit XL-5 versions.Heat is the enemy, especially when it comes to electric motors. Keep your...

These are the Integy 12mm Blue Aluminum Wheel Hubs for the Traxxas Stampede, Rustler and Slash FEATURES Blue anodized aluminum INCLUDESFour Aluminum Hex Wheel Hubs REQUIRESAssembly onto the truck SPECSInner Diameter: 0.19"  (5mm)

This is the Traxxas Alloy Slipper Pressure Plate and Hub for the Revo 2.5, 3.3, E-Revo, E-Revo Brushless, E-Maxx 16.8V, and E-Maxx Brushless trucks. These are part of the slipper assembly.

This is the Viper Scale Racing Viper VSPEC W/Tyco 300ZX Hardbody Viper HardbodyNow Featuring hardbodies from your favorite classic AFX, Tycos, Life likes and more! The VSPEC race car is a reliable, fast and fully up-gradable HO Scale Slot car built with...

This is the Viper Scale Racing Viper VSPEC W/Tyco NASCAR Hardbody (#43) Viper HardbodyFeaturing hardbodies from your favorite classic AFX, Tycos, Life likes and more! The VSPEC race car is a reliable, fast and fully up-gradable HO Scale Slot car built...