Jato 3.3

This is the Rubber Tuned Pipe Coupler Set for the Traxxas Revo, TRAC71**. FEATURES:Black rubber construction INCLUDES:One black couplerOne black exhaust deflectorTwo 7" (178mm) zip tiesTwo 3" (76mm) zip ties REQUIRES:Installing between tuned pipe and...

This is a Traxxas Jato 2.5 and 3.3 Aluminum Slipper Pressure Plate and Hub.

This is the Traxxas Aluminum Handled Body Post Hole Reamer with Cap for Lexan RC bodies.  With a crisp steel cutting edge and included aluminum cap for protection, this is not your average body reamer.  The tip features both metric (mm) and...

This is the Traxxas Black Antenna Tube with Cap and Wire Retainer.  These are compatible with nearly all Traxxas cars, trucks and boats.  The sleek black design looks great as well.

This is the GPM Racing Gunmetal Front Turnbuckle Camber Links for Traxxas 1/10 Slash 4x4 VXL, Rustler 4x4 VXL, Stampede 4x4 VXL, and Jato 3.3 trucks. These feature aluminum rod ends with a steel turnbuckle link for adjustability and strength.These are...

This is the Traxxas TRX 2.5 & 3.3 Engine Backplate 20x1.4mm O-Ring, part number 5213.

This is a Traxxas Rod End Set for the optional GTR shocks on the Revo. Features: Plastic construction Black in color Includes: Six Rod Ends Specifications:Length: 18.35mm (0.72")Width at ball joint: 10.35mm (0.40") Comments: If Pivot Balls are...

This is the optional Blue Traxxas Resonator Dyno-Tuned Performance Pipe for the Traxxas Jato, Nitro Rustler and Nitro 4-Tec with TRX Racing Engines. FEATURES:The Traxxas Resonator aluminum tuned pipe is specifically engineered to fit right in the...

This is a Traxxas Jato 2.5 and 3.3 Shim Set.  This includes four silver metal hollow balls and four 3mm silver washers.  These are for adjusting the roll center of the truck.

This is a pair of Traxxas Jato 2.5 and 3.3 Throttle Return Springs.  You don't want to run a truck without this on it.

This is the Traxxas Complete Stock Replacement Carburetor for the Traxxas TRX 2.5 and TRX 3.3 Engines.  A damaged carburetor will severely decrease the power of your engine.  This can restore the lost power.  The...

This is the Traxxas Auto-Detectable Smart Voltage Sensor.  The auto-detectable voltage sensor plugs into the optional TQi Telemetry Expander to provide real-time voltage data while you drive. Real-time telemetry requires a TQi radio with Traxxas...

These are 3x5mm Backplate screws for the Traxxas 2.5, 2.5R, and 3.3 engines. 3x6 mm cap-head machine screws with hex drive heads. Features: Black steel construction Includes: Six black steel cap head screws Specifications:Length: 5mmDiameter:...

This is the EZ Start 2(R) Starting System from Traxxas. This is the updated replacement for the first-generation EZ Start 2 System. It features a higher torque motor for the new 3.3 race series engines. FEATURES:Simple push-button starting for glow plug...

This is the Traxxas TRX 3.3 Engine Piston and Sleeve for the Traxxas TRX 3.3 engines.  This fits the 3.3 engines used in the Traxxas Revo, T-Maxx, Jato, and Nitro 4-Tec vehicles.  A new pistion and sleeve can restore lost power from wear on...

This is the Traxxas Multi-tool (plastic) The plastic multi-tool can be used to loosen castle nuts as well as upper and lower shock caps. Replacement Part ForE-Revo VXL BrushlessHoss 4X4 VXLJatoRevoRustler 4X4 VXLRustler 4X4Slash 4X4 UltimateSlayer Pro...

This is set of Traxxas 5525R Heavy Duty Rod Ends (8). These are used in many Traxxas vehicles, including the Stampede 2WD, Rustler, Bandit, Slayer, Jato and 1/16 Summit.Includes:8 rod endsSpecificationsLength: 31.5mm (1.24")Width at ball...

This is the Traxxas Blue Aluminum GTR Shock Set for Jato, Revo, E-Revo, Summit, Slayer, and XO-1 vehicles. Shock oil is included. Springs are sold separately.Features Machined threaded aluminum body with oversized spring collar for ...

These are the Traxxas Mounts for the RPM Telemetry Sensor for Nitro Engines. RPM sensor mounts allow you to mount an RPM sensor to your nitro engine. IncludesThree different plastic mountsTwo plastic spacersTwo flat washersTwo split washersTwo hex socket...

This is an optional Traxxas Large Knurled Flywheel for use with Starter Boxes. Features: Large knurles to be gripped by rubber starter wheels Two pin aluminum construction Vent holes drilled to keep clutch shoes cooler Includes: One 40mm...

This is the Traxxas replacement piston and sleeve for the TRX Pro .15 engines. Features: ABC (Aluminum piston with a Brass sleeve or liner that is Chrome plated) Matched set with oil ring Includes:1 Piston1 Sleeve (liner)

This is the 1st Speed Gear 32T for the Traxxas Nitro Jato Stadium Truck. FEATURES:Nylon constructionBlack in color INCLUDES:One 1st Speed Gear 32TOne Input Gear 14TOne Threaded Pin Shaft REQUIRES:Assembly onto Vehicle

This is Traxxas Jato 2.5 and 3.3 Assembled Composite Tuned Pipe.  This features molded composite construction and includes a rubber header gasket. Replacement composite tuned exhaust pipe Replacement Part ForJatoTRX 2.5

This is a set of Traxxas Jato 2.5 and 3.3 Front Upper and Lower Bulkheads. FEATURES:Nylon ConstructionBlack in Color INCLUDES:One Front Upper BulkheadOne Front Lower Bulkhead

This is a Traxxas Jato 2.5 and 3.3 Receiver and Battery Box Cover Set.

This is a Traxxas Jato 2.5 and 3.3 Stock Replacement Rear Bumper.

This is a set of Traxxas Left and Right Steering Servo Mounts for the Traxxas Jato 2.5 and 3.3 trucks.

This is a Traxxas Jato 2.5 and 3.3 Stock Replacement Front Body Mount.

This is the Brake Cam Lever for the Traxxas Nitro Jato Stadium Truck. FEATURES:Nylon constructionBlack in color INCLUDES:One Brake Came LeverOne Linkage Brake BellcrankOne Brake Bellcrank Rod REQUIRES:Assembly onto Vehicle

This is a set of Traxxas Revo Assembled GTR Anodized Shocks (4).  The GTR shocks work well with all versions of the Revo, including the 2.5, 3.3, E-Revo brushed & brushless, and the Slayer trucks.  These are an excellent way to upgrade your...

This is the Traxxas Aluminum Hollow Ball Set for the Revo 3.3, 1/10 E-Revo, 1/10 Summit, Jato, and Slayer trucks. Every ounce matters! Save weight with these aluminum upgrades!Features Aluminum ConstructionGun Metal Grey in ColorIncludes30x Tall Centered...

This is the Traxxas Bellcrank Bushing set for the Nitro Rustler, T-Maxx .15, 2.5, 3.3, Slayer, and other vehicles.

This is a pair of 2.8" Twin-Spoke Rear Wheels for the Traxxas Jato 2.5 and 3.3 trucks.  These are stock replacement wheels.FEATURES: Nylon constructionChrome platedFive split spoke wheel patternUses 12mm hex adapterINCLUDES: Two Rear Chrome Wheels

This is a Traxxas Jato 2.5 and 3.3 Fuel Tank Cap, Pull Ring, and Fuel Line Pinch Clip.

This is a Traxxas Jato 2.5 and 3.3 Stock Replacement Front Shock Tower.

This is a set of two (2) Traxxas Jato Rear GTR Shock Springs with the 1.6 Blue Weight Rating.

This is a Package of Replacement Cush-Drive Elements for the EZ Start 2 System. FEATURES:Black plastic construction INCLUDES:Four cush-drive elements REQUIRES:The remainder of the EZ Start 2 system. SPECS:Length: 6mm (0.24")

This is a Traxxas Jato 2.5 and 3.3 Complete Fuel Tank Assembly.  This direct replacement tank features clear nylon construction with spring loaded lid, pre-installed pressure fittings, and the tank lid has a pull ring for easier refuelling. ...

This is a Traxxas Jato 2.5 and 3.3 E-Z Start Wiring Harness.  This is a direct replacement part.

This is a Traxxas TRX 2.5 and 2.5R Piston and Sleeve kit.  If you have several gallons of fuel through your engine, it may be time for a new piston and sleeve.  It is a direct replacement.  Included are one piston, one...