Jato 3.3

These are the Hot Racing Carbon Fiber Stock Length Slipper Clutch Pads, for use in place of Traxxas 5352 or 5552 slipper pads. These fit Traxxas Bandit, E-Maxx, E-Revo, Jato 3.3, Rally VXL, Revo 3...

This a bottle of 10K Weight Diff Oil (1.75 oz / 50cc) with a filler nozzle. This oil can be used in a wide range of Traxxas vehicles to help tune the differentials for optimum performance.For use...

This is the Traxxas All-Star 2.8" Black Chrome Wheels and Anaconda Tires (2) Anaconda performance street tires feature a specially formulated tire compound providing exceptional wear and sticky...

These are the Traxxas Pink Aluminum 4mm Flanged Wheel Nuts (4). These wheel nuts fit a wide variety of Traxxas vehicles. Lightweight and great looking, these 4 mm anodized aluminum flanged lock nuts...

This is the Traxxas Molex/Tamiya to Receiver Pack Charging Adapter. This adapter allows you to use a charger equipped with a standard Tamiya-style plug to charge receiver batteries.

This is the 500K Weight Differential Oil from Traxxas FEATURES Lubricates differential

This is the Traxxas 24-Tooth Clutch Bell with Fiber Washers and E-Clips. This can be used on Traxxas 1/10 nitro vehicles.Features:Fits Traxxas 1/10 scale nitro vehiclesConstructed of hardened...

This is a Traxxas Jato 2.5 and 3.3 Engine Mount with Spacers.  This includes one silver engine mount, two engine mount spacers, four 3mm x 15mm socket head screws with washers, two 4mm x 18mm button...

This is a Traxxas 22-Tooth Clutch Bell for the Traxxas T-Maxx .15, 2.5, 2.5R, 3.3, Revo, Jato, Nitro Rustler, and Nitro Stampede, Nitro 4-Tec.  The higher the number of teeth on your clutch bell, the...

This is a Traxxas 18-Tooth Clutch Bell for the Traxxas T-Maxx .15, 2.5, 2.5R, 3.3, Revo, Jato, Nitro Rustler, and Nitro Stampede, Nitro 4-Tec.  The higher the number of teeth on your clutch bell, the...

This is the Traxxas Replacement Servo Gear Set for 2055 and 2056 Servos. This is Traxxas part number 2053.

This is a package of six 3x6mm Traxxas Button Head Screws. Features: Steel construction Black in colo

This is a set of Traxxas Jato 2.5 and 3.3 Rear Suspension Pin Mounts.

This is a pair of Assembled and Glued Rear Victory Tires and Wheels for the Traxxas Jato 2.5 and 3.3 trucks.  These are direct replacments for the originals, and if you are running on tar or cement,...

This is the Traxxas 2055 High-Torque Servo.  This has 80 oz/in of torque, making it an excellent steering servo.  This works well in the Traxxas T-Maxx, E-Maxx, Revo or any other vehicle that you...

This is a Traxxas 56-Tooth Spur Gear for the Jato 2.5, 3.3, and the T-Maxx 3.3. The lower number of teeth on the spur gear, the faster the vehicle will be.  The higher the number of teeth, the more...

These are the Traxxas 2.5x10mm Cap-Head Hex Machine Screws. Each package includes six screws.Set of six 2.5x10 mm cap-head machine screws with hex-drive heads Replacement Part For:1/16 E-Revo VXL1/16...

This is a set of RPM Black Snap-Tite Body Savers. One of the weakest points on a Lexan body is where the body mounts to the chassis. The holes cut in the body for the body posts have a tendency to...

This is the Traxxas Replacement O-ring Header Gasket for the Traxxas 2.5, 2.5R, and 3.3 Engines. This is located on the header of the engine. Features: Red silicone construction.

This is the Traxxas TRX 3.3 Racing Engine with Pull Start.  This will give your Revo, T-Maxx 2.5, or Jato an unbelievable boost in performance.  This is a must have upgrade.  You can also use this...

These are the Wheelie Bar Wheels for the Traxxas 3.3 T-Maxx. FEATURES:Constructed of hard plasticAxles constructed of steel

This is a pack of Traxxas 3x15mm Countersunk Hex Head Machine Screws. Each package includes six screws.Fits:1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitE-MaxxE-Maxx BrushlessFunny CarJato 2...

This is the Traxxas 35mm Flywheel with Magnet for use with the TQi Radio System.FeaturesFor use with Traxxas glow powered vehiclesEquipped with a magnet that enables an RPM sensor to read RPM data ...

This is the Traxxas iD LiPo Battery Balance Adapter for Cell Voltage Checkers. This works with 2S, 3S, and 4S ID LiPo batteries to connect them to cell voltage checkers for individual cell reading...

This is the Traxxas High-Speed Needle Valve Assembly for the TRX 2.5, 2.5R, and 3.3 nitro engines. This includes the high speed need, fuel fitting, 2.5x1.15mm O-rings (2), and 5.3x7.8x.6mm crush...

These are the Traxxas 3x15mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used across many different Traxxas vehicles.Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16...

This is a set of six Traxxas 4mm x 10mm Countersunk Machine Screws for the Jato 2.5 and 3.3 trucks. Replacement part for these modelsJatoMaxxNitro SlashX-MaxxXRT

This is a pair of Traxxas 5x11x4mm ball bearings.  These are used in the clutch bells of many of the Traxxas vehicles. Features:Ball bearings reduce friction and last longer th

This is the GPM Racing Blue Front Turnbuckle Camber Links for Traxxas 1/10 Slash 4x4 VXL, Rustler 4x4 VXL, Stampede 4x4 VXL, and Jato 3.3 trucks. These feature aluminum rod ends with a steel...

These are the RPM Green Long Rod Ends (12) for 1/10 Traxxas vehicles. These are direct replacements for TRA5525 rod ends.RPM Rod Ends cover a wide range of currently available Traxxas vehicles...

This is the Traxxas ProGraphix Body with Decals for the Jato 3.3. Features

This is the Traxxas 2056 High-Torque Waterproof Servo   High-Torque Waterproof Servo 80 oz-in torque Transit time 0.23 sec/60°   Replacement Part For Bandit BIGFOOT No. 1 Officially Licensed...

This is a Traxxas Jato 2.5 and 3.3 Chassis Top Plate. This holds the receiver and throttle servos. FEATURES:Nylon construction, holds receiver and throttle servoBlack in color

This is the Traxxas Engine Connecting Rod for TRX 2.5, 2.5R, and 3.3 Nitro Engines.FeaturesAluminum constructionPre-installed bushingSpecificationsLength: 37mm (1.46")Thickness: 3mm (0.12")Fits:Jato...

These are the replacement GTR Shock Retainers for the Traxxas Nitro Revo Monster Truck. FEATURES:Nylon ConstructionBlack in Color

This is a set of six Traxxas 3mm x 18mm Button-Head Machine Screws for the Jato 2.5 and 3.3 trucks. Replacement part forDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0Ford F-150...

This is a package of six Traxxas 4x12mm Button-Head Hex Machine Screws. Replacement part for these modelsDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0E-Revo VXL BrushlessFord F-150...

These are the Traxxas 3x10mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used across many of the Traxxas vehicles.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10...

These are the 3x6mm Flathead Machine Screws from Traxxas.FeaturesSteel constructionBlack in color

These are the Traxxas 3x20mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used in many different Traxxas vehicles.Replacement part forBandit VXLDrag Slash 1967 Chevrolet...