Jato 3.3

This is a set of Traxxas Rod ends (12)/ hollow balls (12) Set of twelve rod ends come assembled with hollow balls. Replacement Part ForDrag Slash 1967 Ch

This is a set of Traxxas Jato 2.5 andThese are the Left and Right Gearbox Halves for the Traxxas Nitro Jato Stadium Truck. FEATURES:Nylon constructionBlack in color

This is a Traxxas Jato 2.5 and 3.3 Roll Hoop and EZ Start Plug Mount.

This is the Traxxas Polished Aluminum Resonator Dyno-Tuned High RPM Performance Pipe for the Jato 2.5 and 3.3 trucks.  This will also work on the Nitro Rustler and Nitro 4-Tec from Traxxas.  These...

This is the Traxxas TRX 3.3 Engine Wrist Pin with Wrist Pin Clips. This is a replacement wrist pin for the 3.3 engine in vehicles like the Jato 3.3, Nitro 4-Tec, Nitro Slash, Revo 3.3, Slayer Pro,...

This is a pair of RPM Blue Black Suspension A-Arms for the Traxxas Jato 2.5 and 3.3 trucks. These are very strong, and they include a lifetime warranty through RPM against breakage. If you break one...

This is the Team Integy 58-Tooth Steel Spur Gear for the Traxxas Jato 2.5, 3.3, and T-Maxx 3.3 trucks. This is MUCH stronger than a plastic spur gear. The Integy spur gears feature color-coded...

This is a package of three Air Filter Foam Inserts for the Traxxas 2.5 engine. FEATURES:Constructed of foam and pre-oiled to trap dirt

This is a Complete Control Box for the Easy Start 2 on the Traxxas Tmaxx. This houses the 7.2V battery for the Easy Start, and provides the start button. Also for the Tmaxx 3.3. FEATURES

This is the Traxxas 58mm Camber Links, Turnbuckles (Assembled with Rod Ends and Hollow Balls) (2) 58 mm camber links come assembled with rod ends and hollow balls. Replacement Part ForFord F-150...

These are the BellCrank Bushings for the Traxxas Nitro Jato Stadium Truck. FEATURES:Nylon constructionWhite in color

This is a pair of Traxxas 5x10x4mm ball bearings.  These are used in the clutch bells of many of the Traxxas vehicles. FeaturesThe bearings are constructed

This is a pack of Traxxas Black 90-Degree Angled Body Mounting Clips (10 clips).  The angled design helps make it easier to remove and install them from the body posts. These can be used as clips on...

This is the Traxxas Curved Tip Heavy Duty Body Scissors for cutting and trimming polycarbonate RC bodies. To do a good job on a custom body, the right tools are a must. Having both a curved tip and...

This is the Traxxas Straight Tip Heavy Duty Body Scissors for cutting and trimming polycarbonate RC bodies. To do a good job on a custom body, the right tools are a must. Having both a straight tip...

This is a pair of Traxxas Replacement Wheelie Bar Rubber Tires for the Traxxas aluminum aftermarket wheel sets (part 5186 & 5186A) used on many vehicles.Includes: Two Rubber Tires for the Wheelie...

These are the Traxxas 90-Degree Body Clips. These are a smaller size, typically used to hold down receiver covers, battery hold-downs, bodies on smaller trucks, etc.FeaturesMetal ConstructionSilver...

This is the Traxxas Standard Size Body Clips (12) - Standard-duty body clips   Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 SummitBandit VXLBanditBIGFOOTJatoNitro...

This is a set of Traxxas Jato 2.5 and 3.3 Front and Rear Aluminum Suspension Tie Bars.

This is a Traxxas Jato 2.5 and 3.3 Left and Right Half Shaft Set.  These come completely assembled and have rubber sealed boots.  These are used on the rear of the truck and attach to the diff output...

This is a Traxxas Jato 2.5 and 3.3 Stock Replacement Rear Shock Tower.

This is an O-Ring and Seal Set for the TRX 2.5 Engine. FEATURES Complete seal and ring set.

This is a Traxxas 20-Tooth Clutch Bell for the Traxxas T-Maxx .15, 2.5, 2.5R, 3.3, Revo, Jato, Nitro Rustler, and Nitro Stampede, Nitro 4-Tec.  The higher the number of teeth on your clutch bell, the...

These are Traxxas 4mm Stainless Locking Nuts. These will fit many different Traxxas vehicles, and are a great item to keep in your toolbox.Features:Stainless steel construction.Nylon insert...

This is the Hot Racing Aluminum 54T Slipper Spur Gear (0.8 metric pitch, compatible with 32-pitch) Features CNC machined 6061-T6 aluminum Direct fit replacement for vehicles with slipper clutch...

This is the Hot Racing HD CNC Machined Hard Anodized Aluminum Slipper Plate and Hub for the 1/10 Traxxas Bandit, Jato 3.3, Rally*, Rustler, Slash 2WD, Slash 4X4*, Stampede 2WD, and Stampede 4X4*...

This is the Traxxas Servo Case for 2055 servo. This is Traxxas part number 2052.

This is the optional Variable Damping Kit for GTR Shocks found on the Traxxas Revo 3.3 RTR and the Traxxas E-Revo RTR. FEATURES Ny

This is the Cooling Head Protector for the Traxxas TRX 3.3 Racing Engine, TRA5407. FEATURES:Constructed of plastic, black in color

This is the Digital High Torque Traxxas Servo. FEATURES:Ball bearingsBlack plastic construction INCL

This is the Brake Disc for the Traxxas Nitro Jato Stadium Truck. FEATURES:Composite constructionGrey in color

This is a set of two (2) Traxxas 4mm x 7mm x 2.5mm Blue Rubber Shielded Ball Bearings.  These are factory replacements.  These fit several Traxxas models. Upgrade your standard plastic bellcrank...

This is the Traxxas 5x11x4mm Ball Bearing Set.  This includes eight ball bearings.  These are used in many of the Traxxas vehicles. FeaturesMade o

This is the Hot Racing 53-Tooth 0.8 Mod 32-Pitch Spur Gear for 1/10 E-Revo, Jato, T-Maxx 3.3, Slash 4x4, Stampede 4x4, Summit, and 1/10 Rally VXL.FEATURES:- CNC machined and lightened hardened steel...

This is a set of Traxxas TRX 3.3 Cooling Head Gaskets measuring 0.20, 0.30, and 0.40mm. The stock size is 0.30mm. These will give you the ability to tune your engine for optimal performance under...

This is the Traxxas Countersunk Hex Screw 3x8mm

This is the Rubber Tuned Pipe Coupler Set for the Traxxas Revo, TRAC71**. FEATURES:Black rubber construction

This is a Traxxas Jato 2.5 and 3.3 Aluminum Slipper Pressure Plate and Hub.

This is the Traxxas Aluminum Handled Body Post Hole Reamer with Cap for Lexan RC bodies.  With a crisp steel cutting edge and included aluminum cap for protection, this is not your average body...

This is the Traxxas Black Antenna Tube with Cap and Wire Retainer.  These are compatible with nearly all Traxxas cars, trucks and boats.  The sleek black design looks great as well.