Traxxas

This is the Traxxas Rebuild kit (heavy duty), slipper clutch (steel disc/ aluminum friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1)) Includes aluminum friction pads...

This is a pair of Traxxas SS Split Spoke Satin 3.8" Wheels with 14mm hexes, for use on T-Maxx, E-Maxx, E-Revo, and Summit trucks with 14mm hex hubs.Features Ten spoke satin finish plastic...

This is the Traxxas EZ-Peak 2-Amp AC Peak charger.  This will charge 5-8 Cell NiCd and NiMH batteries ranging from 900mAh to 8000mAh. Features: Traxxas High-Current connector

This is the Traxxas Stock Dual Motor Plate for the E-Revo truck. This part holds the motors onto the truck. Features: Aluminum construction

This is a pair of Traxxas 2.8" Rear Alias Tires with foam inserts from for use with vehicles such as the Jato. Features: Super soft rubber compund

This is the Traxxas Speed Control Mounting Plate for the Traxxas Bandit, Rustler and Stampede VXL vehicles. Features: Plastic construction, black in color

This is the Traxxas 2.4GHz Micro 4-Channel Receiver. Features: 2.4GHz For use with the Traxxas TQ 2.4GHz 4-ch Spread Spectrum radio Includes:

This is the Traxxas replacement servo gear set for the 2070 & 2075 servos. These servos are found in a wide range of Traxxas vehicles, including:Bandit XL-5 & VX E-Maxx 16.8V & BrushlessE-Revo &...

This is a Traxxas Large Servo Saver for Futaba, Hitec, Airtronics, and Traxxas servos. This will work on most vehicles requiring a large servo saver. The servo saver protects your steering servo by...

This is a Grey Lower Chassis for the Traxxas Electric Rustler Series FEATURES Constructed of composite plastic

This is the Slipper Clutch Rebuild Kit for the Traxxas Vehicles. The slipper clutch rebuild kit refreshes the standard-duty slipper clutch with a new disc, friction pads (3), springs (2), dowel pin,...

This is a Tube of White Lithium Grease from Traxxas. This product can be used to lubricate parts, such as gears. FEATURES Great lubr

These are a set of Traxxas 2.8" Mounted All Star Front Wheels and Tires for the front of the Nitro Stampede or Nitro Rustler. FEATURES

These are the Chrome Twin Spoke 2.8" Rear Wheels for the Traxxas Jato 3.3. FEATURES Nylon construction

This is the Replacement Servo Saver with Adapters. The spring-loaded servo saver protects your steering servo by absorbing shocks that might otherwise cause internal gear damage. Replacement Part...

This is a replacement set of skid plates for the Traxxas Stampede. Black front and rear skid plates for Traxxas 2WD Stampede models.

This is the Main Chassis for the Traxxas Stampede XL-5. FEATURES Nylon Construction

This is the Traxxas ProGraphix Body(ExtChassis), Clear,w/Decal:Revo3.3 Features

This is the stock replacement clear body for the Traxxas 1/10 Slash 2WD and Slash 4x4. FEATURES:Highly detailed body and cutting lines

This is the Lexan wing for the TRX-1 Includes 1 wing

This is the Traxxas 2080 Waterproof Micro Servo for use on the Traxxas 1/16 E-Revo, Slash, Summit, Ken Block Fiesta, Kyle Busch Trucks, Mustang Boss 302, Rally VXL, and other vehicles. FEATURES <

This is the optional Traxxas Revo Tuned Pipe with Resonator FEATURES Designed for use with the Traxxas Revo and Slayer when fi

These are the Traxxas S1 Mounted Racing Tire (2) w/14mm Hub FR & R Slayer.  Improve the traction and handling of your Slash, Slayer, and Slash 4X4 with the race-proven performance of Traxxas’ new S1...

These are the Red Beadlock Satin Wheels w/SCT Racing Tires for use on the front of the Traxxas Slayer  and the front of the Traxxas Slash FEATURES

This is a set of Traxxas Center Driveshafts for the E-Maxx 14.4V model 3906. These will not fit E-Maxx 16.8V or E-Maxx Brushless trucks. Features: Outside U-joint is lubricated and sealed by a...

This is the Traxxas Differential Kit for the Traxxas 1/10 E-Revo, E-Revo Brushless, and E-Maxx 16.8V, and E-Maxx Brushless trucks.The new Traxxas center differential for E-Revo and E-Maxx...

These are the Drive Shaft Joints for the Traxxas Revo. FEATURES:Steel universal joint set

This is the optional Traxxas Reverse Kit for the Traxxas Revo 3.3 trucks that do not use the Opti Drive module. All the parts you need, even the 2060 sub-micro servo, are included, getting you back...

This is the Traxxas ProGraphix trimmed body for the Traxxas Rustler VXL. Graphics are pre-applied, so you just need to apply a single color of paint to finish to your liking. With the ProGraphix...

This is the Micro 4-Channel Receiver for the Traxxas E-Maxx. FEATURES:27MHz AM operationReplaces damaged receiver

This is the optional Single Motor Plate for the Traxxas E-Revo TRAC07**. FEATURES:Aluminum construction, blue in colorDesigned for a clean install of a single brushless motor system in the E-Revo RTR...

This is the optional Exo-Carbon Fuel Tank Cap for the Traxxas Jato 3.3 (TRAC83**). FEATURES:Plastic constructionExo-carbon finish

This is the optional Exo-Carbon Front Bumper for the Traxxas Jato 3.3 (TRAC83**). FEATURES:Plastic constructionExo-carbon finish

These are the Rear Suspension Arms in Exo-Carbon for the Jato from Traxxas Performance Accessories. FEATURES:Exo-Carbon finish

These are the Traxxas Jato Exo-Carbon Front Suspension Arms for use on Jato 2.5 and Jato 3.3 trucks.FitsJato 2.5Jato 3.3

This is the optional Exo-Carbon Left and Right Dirt Guards for the Traxxas Jato 3.3 (TRAC83**). FEATURES:Plastic constructionExo-carbon finish

This is the optional Exo-Carbon RX Cover for the Traxxas Jato 3.3 (TRAC83**). FEATURES:Plastic constructionExo-carbon finish

This is the optional Exo-Carbon Battery Cover (Mid Chassis) for the Traxxas Jato 3.3 (TRAC83**). FEATURES:Plastic constructionExo-carbon finish

This is the optional Exo-Carbon Rear Bumper/Battery Cover for the Traxxas Jato 3.3 (TRAC83**). FEATURES:Plastic constructionExo-carbon finish

This is an optional Wheelie Bar Mount for all versions of the Traxxas Revo. FEATURES:Constructed of hardened plastic, black in colorInstalls at rear of chassis to hold wheelie bar arm and whee