Traxxas

This is the Traxxas XO-1 Wing (Exocarbon) with Wing Mounts (2) and Washers (2) The XO-1 Exo-Carbon wing adds a glossy, high-tech carbon-fiber look to your supercar. The innovative Exo-Carbon finish...

This is the Traxxas Sway bar kit, Slayer (front and rear) (includes front and rear sway bars and adjustable linkage). This is Traxxas part number 5998Part Number: 5998 / TRA5998FitsSlayerSlayer...

This is a set of four Traxxas Green Body Clip Retainers. These body pin retainers are perfect for keeping your clips from going missing when prepping your boat at the lake.FitsDCB M41Spartan

This is the Traxxas Spartan Boat Hatch with Blue Graphics.FeaturesConstructed of molded plasticPainted blue with black, white and silver graphics SpecificationsLength: 19.1" (486mm)Width: 7.7"...

This is the Traxxas Spartan Boat Hatch with Red Graphics.FeaturesConstructed of molded plasticPainted red with black, white and silver graphics SpecificationsLength: 19.1" (486mm)Width: 7.7" (197mm)...

This is the Traxxas Summit T-Lock Differential Controller for use with AM Radio Systems.FeaturesControls front and rear T-lock servosJST connector to LED LightsFutaba J connector to channel 4 on...

This is the Traxxas 1/10 E-Revo Two-Speed Conversion Kit with Shifting Servo. Make your E-Revo even more versatile with super-low gearing for climbing, while still maintaining speed for all-around...

This is a pair of Traxxas Geode 3.8" Chrome Wheels with 17mm Splined Hex for use with Sidewall Protectors.FeaturesNylon constructionBeadlock appearance style, for use with sidewall protectorsChrome...

These are the Traxxas Canyon AT Tires with Foam Inserts for 3.8" Traxxas-bead Wheels. These massive tires are what come stock on the 1/10 Summit. The Canyon AT has aggressive, angular lugs, along...

This is a pair of Traxxas Red Beadlock Style Sidewall Protector with Screws for use with Traxxas Geode 3.8" Wheels.Includes:Two Red Sidewall ProtectorsTwenty Four 2x6mm ScrewsSpecificationsInner...

This is a pair of Traxxas Yellow Beadlock Style Sidewall Protector with Screws for use with Traxxas Geode 3.8" Wheels.Includes:Two Yellow Sidewall ProtectorsTwenty Four 2x6mm...

This is the Traxxas Motor Mount Hinge Post with Hardware for 1/10 Summit and E-Revo trucks.IncludesOne Motor Mount Hinge PostOne 4x10mm socket cap screw with split and flat washerOne 4x12mm socket...

This is the Traxxas 1/10 E-Revo and Summit Transmission Skidplate and Cover.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Summit

This is the Traxxas 1/10 Summit Front Chrome Bumper, Lightbar, and Roof Lightbar.Fits1/10 Summit

These are the Traxxas 1/10 E-Revo and Summit Front and Rear Battery Door Retainer Clips with a Foam Spacer.IncludesBattery Retainer ClipFront ClipRear ClipFoam SpacerInstruction sheet Fits1/10 E-Revo...

This is the Traxxas Rear Sway Bar Linkage with Rod Ends for 1/10 E-Revo, Revo 3.3, and Slayer Pro trucks.IncludesTwo 3x50mm assembled rear turnbuckles with rod ends, hollow balls and...

This is the Traxxas Brake Cam and Sleeve for Revo 3.3 and Slayer trucks.Includes:Brake CamSleeveFitsRevo 3.3SlayerSlayer Pro

This is a pair of Traxxas Red Aluminum Front and Rear Bulkhead Tie Bars for use on 1/10 E-Revo, Summit, Revo 3.3, and Slayer trucks.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitRevo 3...

This is the Traxxas Revo 3.3 ProGraphix Body. The graphics are pre-painted, and the body only requires the final paint color application. A decal sheet with windows, grill, and lights is included...

This is the Traxxas TRX 2.5 & 3.3 Low-Speed Needle with 2x1mm O-rings (2). This works in Traxxas 2.5 and 3.3 engines.For use with TRX 2.5 & 3.3 engines used in:Nitro 4-TecNitro RustlerNitro...

This is a pair of Traxxas Talon Tires with Foam Inserts, Pre-Mounted on 3.8" Satin Wheels with 14mm Hex Hubs. These can be used on 1/10 E-Revos, Revo 3.3, E-Maxx, and T-Maxx trucks using 14mm hexes...

This is a pair of Traxxas Talon Tires with Foam Inserts, Pre-Mounted on 3.8" Chrome Wheels with 14mm Hex Hubs. These can be used on 1/10 E-Revos, Revo 3.3, E-Maxx, and T-Maxx trucks using 14mm hexes...

This is a pair of Traxxas Split Spoke 3.8" Chrome Wheels with 17mm Splined Hexes for use on T-Maxx, E-Maxx, Revo, E-Revo, and Summit trucks.Features 3.8" 5-split spoke wheels 17mm splined...

This is a pair of Traxxas Split Spoke 3.8" Black Chrome Wheels with 17mm Splined Hexes for use on T-Maxx, E-Maxx, Revo, E-Revo, and Summit trucks.Features 3.8" 5-split spoke wheels 17mm splined...

This is a pair of Traxxas Maxx Chevron Tires with Foam Inserts for use with 3.8" Revo and T-Maxx/E-Maxx wheels. These are a great way to give you RC the true off-road monster truck...

This is a pair of Traxxas 7075-T6 Black Aluminum Rear 124mm Toe Link Tubes with Rod Ends and Wrench for the T-Maxx 2.5R, 3.3, E-Maxx 16.8V, and E-Maxx Brushless trucks with the sealed pivot ball...

This is a pair of Traxxas Hard-Anodized PFTE-Coated T6 Aluminum X-Long Shocks without Springs. These can be used as upgrade shocks for the rear of a wide range of Traxxas vehicles, listed below...

This is a pair of Traxxas Hard-Anodized PFTE-Coated T6 Aluminum Long Shocks without Springs. These can be used as upgrade shocks for the front of a wide range of Traxxas vehicles, listed below...

This is the Traxxas Shift Linkage Set for E-Maxx and E-Maxx Brushless trucks with the 2-speed transmission. It includes the ball cup, servo horn with built-in spring, linkage wire, and hardware...

This is the Traxxas Transmission Output Shaft for use with the 1/10 E-Revo, E-Maxx, and Summit trucks.SpecificationsOverall length: 2.75" (70mm)Diameter of drive dog mount: .39" (10mm)Diameter of...

This is the Traxxas Red 7075-T6 Aluminum Tube 72mm Steering Drag Link with Rod Ends and 7mm Aluminum Wrench for use on the E-Maxx 16.8V and E-Maxx Brushless trucks. This part looks great, and the...

These are the Traxxas E-Maxx Front and Rear Battery Hold Down Retainers with Mounting Screws. These fit the E-Maxx 16.8V and E-Maxx Brushless trucks.IncludesTwo front battery hold down retainersTwo...

This is the Traxxas E-Maxx Brushless ProGraphix Body with Decals. The ProGraphix body comes with pre-printed graphics and only requires one final paint color application to make an awesome looking...

This is a pair of Traxxas 2.8" Black Chrome All-Star Wheels for the Rear of the electric Rustler and Stampede 2WD trucks. These have a 12mm hex hub.SpecificationsOverall Diameter: 2.8" (71mm)Width:...

This is the Traxxas Upper Chassis for the Bandit XL-5 and VXL buggy, as well as the Rustler XL-5 and Rustler VXL trucks.Fits:Bandit VXLBandit XL-5Rustler VXLRustler XL-5

This is the Traxxas Red LED Light Set with Harness, LED housings, and mounting hardware for the 1/10 Grave Digger Monster Jam Truck.Includes:4 red lightsLED housings (2)Wire clip (1)Wire ties...

This is the Traxxas Skully Blue Heavy Duty Pre-Painted Body with Decals. This can be used on the Traxxas Skully and other electric Stampede trucks (may require extended body mounts)...

This is the Traxxas Skully Green Heavy Duty Pre-Painted Body with Decals. This can be used on the Traxxas Skully and other electric Stampede trucks (may require extended body mounts)...

This is the Traxxas Stampede 2WD ESC and Waterproof Receiver Box Mounting Plate. This is used for installation of XL-5, XL-10, and VXL speed controls, and the waterproof receiver box.Fits1/10...

This is the Traxxas ESC Mounting Plate for XL-5 & XL-10 Electronic Speed Controls in the Bandit, Rustler, Stampede 2WD, and 4-Tec vehicles.FitsBandit XL-5Rustler XL-5Stampede XL-5 2WD4-Tec