Traxxas

This is the Traxxas Gear, 26-T pinion (48-pitch, 2.3mm shaft)/ set screw. This is Traxxas part number 7040Part Number: 7040 / TRA7040Fits1/16 E-Revo Brushed1/16 Slash 4x4More detail coming soon!...

This is the Traxxas 1/16 Slash ProGraphix Body w/Decals From mild to wild, choose your own colors to personalize your body. The detailed graphics are fully painted, but the rest of the body is clear,...

This is the Traxxas Body, 1/16 Slash (clear, requires painting)/ grill, lights decal sheet. This is Traxxas part number 7012Part Number: 7012 / TRA7012Fits1/16 Slash 4x4More detail coming soon!...

This is the Traxxas Header pipes, satin chrome. This is Traxxas part number 6985Part Number: 6985 / TRA6985FitsFunny CarMore detail coming soon! Please check your vehicle manual to confirm vehicle...

This is the Traxxas Body, Slash 4X4, white (2014 paint) (painted, decals applied). This is Traxxas part number 6848Part Number: 6848 / TRA6848FitsSlash 2WD VXL (low CG)Slash 2WD XL-5More detail...

This is the Traxxas Body, Slash 4X4, Mike Jenkins #47 (2014 paint) (painted, decals applied). This is Traxxas part number 6826RPart Number: 6826R / TRA6826RFitsSlash 2WD VXL (low CG)Slash 2WD...

This is the Traxxas Wheelie bar mounts/ rear skidplate (black). This is Traxxas part number 6777Part Number: 6777 / TRA6777FitsStampede 4x4 VXLStampede 4x4 XL-5TellurideMore detail coming soon!...

This is the Traxxas 18-Tooth Pinion Gear (1.0 metric pitch, 20-deg pressure angle). This is for use on the X-Maxx trucks.Features Hardened steel construction Fits 0.196" (5mm) diameter motor...

This is the Traxxas 17-Tooth Pinion Gear (1.0 metric pitch, 20-deg pressure angle). This is for use on the X-Maxx trucks.Features Hardened steel construction Fits 0.196" (5mm) diameter motor...

This is the Traxxas 16-Tooth Pinion Gear (1.0 metric pitch, 20-deg pressure angle). This is for use on the X-Maxx trucks.Features Hardened steel construction Fits 0.196" (5mm) diameter motor...

This is the Traxxas Gear, 14-T pinion (1.0 metric pitch, 20° pressure angle) (fits 5mm shaft)/ set screw. This is Traxxas part number 6488Part Number: 6488 / TRA6488FitsX-MaxxXO-1More detail coming...

This is the Traxxas 15-Tooth Pinion Gear for the Traxxas X-Maxx (1.0 metric pitch, 20-deg pressure angle).Features Hardened steel construction Stock replacement pinion gear Fits 0.196" (5mm)...

This is the Traxxas Spartan Boat Hatch with Blue Graphics.FeaturesConstructed of molded plasticPainted blue with black, white and silver graphics SpecificationsLength: 19.1" (486mm)Width: 7.7"...

This is the Traxxas Spartan Boat Hatch with Red Graphics.FeaturesConstructed of molded plasticPainted red with black, white and silver graphics SpecificationsLength: 19.1" (486mm)Width: 7.7" (197mm)...

This is the Traxxas Summit T-Lock Differential Controller for use with AM Radio Systems.FeaturesControls front and rear T-lock servosJST connector to LED LightsFutaba J connector to channel 4 on...

This is a pair of Traxxas Geode 3.8" Chrome Wheels with 17mm Splined Hex for use with Sidewall Protectors.FeaturesNylon constructionBeadlock appearance style, for use with sidewall protectorsChrome...

These are the Traxxas Canyon AT Tires with Foam Inserts for 3.8" Traxxas-bead Wheels. These massive tires are what come stock on the 1/10 Summit. The Canyon AT has aggressive, angular lugs, along...

This is a pair of Traxxas Yellow Beadlock Style Sidewall Protector with Screws for use with Traxxas Geode 3.8" Wheels.Includes:Two Yellow Sidewall ProtectorsTwenty Four 2x6mm...

This is the Traxxas 1/10 E-Revo and Summit Transmission Skidplate and Cover.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Summit

This is the Traxxas Rear Sway Bar Linkage with Rod Ends for 1/10 E-Revo, Revo 3.3, and Slayer Pro trucks.IncludesTwo 3x50mm assembled rear turnbuckles with rod ends, hollow balls and...

This is the Traxxas Revo 3.3 ProGraphix Body. The graphics are pre-painted, and the body only requires the final paint color application. A decal sheet with windows, grill, and lights is included...

This is a pair of Traxxas Talon Tires with Foam Inserts, Pre-Mounted on 3.8" Satin Wheels with 14mm Hex Hubs. These can be used on 1/10 E-Revos, Revo 3.3, E-Maxx, and T-Maxx trucks using 14mm hexes...

This is a pair of Traxxas Talon Tires with Foam Inserts, Pre-Mounted on 3.8" Chrome Wheels with 14mm Hex Hubs. These can be used on 1/10 E-Revos, Revo 3.3, E-Maxx, and T-Maxx trucks using 14mm hexes...

This is a pair of Traxxas Split Spoke 3.8" Chrome Wheels with 17mm Splined Hexes for use on T-Maxx, E-Maxx, Revo, E-Revo, and Summit trucks.Features 3.8" 5-split spoke wheels 17mm splined...

This is a pair of Traxxas Hard-Anodized PFTE-Coated T6 Aluminum X-Long Shocks without Springs. These can be used as upgrade shocks for the rear of a wide range of Traxxas vehicles, listed below...

This is a pair of Traxxas Hard-Anodized PFTE-Coated T6 Aluminum Long Shocks without Springs. These can be used as upgrade shocks for the front of a wide range of Traxxas vehicles, listed below...

This is the Traxxas Shift Linkage Set for E-Maxx and E-Maxx Brushless trucks with the 2-speed transmission. It includes the ball cup, servo horn with built-in spring, linkage wire, and hardware...

This is the Traxxas Red 7075-T6 Aluminum Tube 72mm Steering Drag Link with Rod Ends and 7mm Aluminum Wrench for use on the E-Maxx 16.8V and E-Maxx Brushless trucks. This part looks great, and the...

These are the Traxxas E-Maxx Front and Rear Battery Hold Down Retainers with Mounting Screws. These fit the E-Maxx 16.8V and E-Maxx Brushless trucks.IncludesTwo front battery hold down retainersTwo...

This is the Traxxas E-Maxx Brushless ProGraphix Body with Decals. The ProGraphix body comes with pre-printed graphics and only requires one final paint color application to make an awesome looking...

This is the Traxxas Upper Chassis for the Bandit XL-5 and VXL buggy, as well as the Rustler XL-5 and Rustler VXL trucks.Fits:Bandit VXLBandit XL-5Rustler VXLRustler XL-5

This is the Traxxas Red LED Light Set with Harness, LED housings, and mounting hardware for the 1/10 Grave Digger Monster Jam Truck.Includes:4 red lightsLED housings (2)Wire clip (1)Wire ties...

This is the Traxxas Skully Blue Heavy Duty Pre-Painted Body with Decals. This can be used on the Traxxas Skully and other electric Stampede trucks (may require extended body mounts)...

This is the Traxxas Skully Green Heavy Duty Pre-Painted Body with Decals. This can be used on the Traxxas Skully and other electric Stampede trucks (may require extended body mounts)...

This is the Traxxas Stampede 2WD ESC and Waterproof Receiver Box Mounting Plate. This is used for installation of XL-5, XL-10, and VXL speed controls, and the waterproof receiver box.Fits1/10...

This is the Traxxas ESC Mounting Plate for XL-5 & XL-10 Electronic Speed Controls in the Bandit, Rustler, Stampede 2WD, and 4-Tec vehicles.FitsBandit XL-5Rustler XL-5Stampede XL-5 2WD4-Tec

These are the Traxxas Blue Front and Rear Skid Plates for the Stampede 2WD, Skully, Craniac, and 1/10 Monster Jam Trucks.Fits1/10 Monster Jam TrucksCraniacSkullyStampede VXL 2WDStampede XL-5 2WD

These are the Traxxas Green Front and Rear Skid Plates for the Stampede 2WD, Skully, Craniac, and 1/10 Monster Jam Trucks.Fits1/10 Monster Jam TrucksCraniacSkullyStampede VXL 2WDStampede XL-5 2WD

This is the Traxxas Stampede ProGraphix Body. It comes with graphics pre-printed, and only a final color application is needed to create a new custom body for your truck! Window, grill, lights, and...

This is the Traxxas Velineon 3500 Motor Replacement Endbell Cover. This is great to help restore the look of your motor, and protect the case and wires.FitsTraxxas 3500 Velineon 1/10 Scale Brushless...