Traxxas

This is a pair of Traxxas SS Split Spoke Satin 3.8" Wheels with 14mm hexes, for use on T-Maxx, E-Maxx, E-Revo, and Summit trucks with 14mm hex hubs.Features Ten spoke satin finish plastic...

This is the Traxxas EZ-Peak 2-Amp AC Peak charger.  This will charge 5-8 Cell NiCd and NiMH batteries ranging from 900mAh to 8000mAh. Features: Traxxas High-Current connector Easy Plug-In and...

This is the Traxxas Speed Control Mounting Plate for the Traxxas Bandit, Rustler and Stampede VXL vehicles. Features: Plastic construction, black in color Includes: One speed control...

This is the Traxxas 2.4GHz Micro 4-Channel Receiver. Features: 2.4GHz For use with the Traxxas TQ 2.4GHz 4-ch Spread Spectrum radio Includes: One 2.4GHz 4 Channel Micro...

This is the Traxxas replacement servo gear set for the 2070 & 2075 servos. These servos are found in a wide range of Traxxas vehicles, including:Bandit XL-5 & VX E-Maxx 16.8V & BrushlessE-Revo &...

This is a Grey Lower Chassis for the Traxxas Electric Rustler Series FEATURES Constructed of composite plastic INCLUDESOne Traxxas Grey Lower Chassis REQUIRESInstalling all components onto...

This is the Replacement Servo Saver with Adapters. The spring-loaded servo saver protects your steering servo by absorbing shocks that might otherwise cause internal gear damage. Replacement Part...

This is the Main Chassis for the Traxxas Stampede XL-5. FEATURES Nylon Construction Grey in Color INCLUDESOne Grey Nylon Chassis REQUIRESInstallation into Vehicle

This is the Traxxas ProGraphix Body(ExtChassis), Clear,w/Decal:Revo3.3 Features Graphics are printed, requires paint & final color application Overview With the ProGraphix process, you will...

This is the stock replacement clear body for the Traxxas 1/10 Slash 2WD and Slash 4x4. FEATURES:Highly detailed body and cutting lines INCLUDES:One clear body for the Traxxas SlashOne decal...

This is the Lexan wing for the TRX-1 Includes 1 wing SpecsLength 5 3/4"Width 3"Height 1" RequiresWing mounting wire and buttons

This is the Traxxas 2080 Waterproof Micro Servo for use on the Traxxas 1/16 E-Revo, Slash, Summit, Ken Block Fiesta, Kyle Busch Trucks, Mustang Boss 302, Rally VXL, and other vehicles...

These are the Traxxas S1 Mounted Racing Tire (2) w/14mm Hub FR & R Slayer.  Improve the traction and handling of your Slash, Slayer, and Slash 4X4 with the race-proven performance of...

These are the Red Beadlock Satin Wheels w/SCT Racing Tires for use on the front of the Traxxas Slayer  and the front of the Traxxas Slash FEATURES Glue Type Red Beadlock Rings Silver...

This is a set of Traxxas Center Driveshafts for the E-Maxx 14.4V model 3906. These will not fit E-Maxx 16.8V or E-Maxx Brushless trucks. Features: Outside U-joint is lubricated and sealed by a...

These are the Drive Shaft Joints for the Traxxas Revo. FEATURES:Steel universal joint set INCLUDES:Four Steel Universal blocksFour Steel Universal pinsTwo black steel set pinsFour steel hinge...

This is the Traxxas ProGraphix trimmed body for the Traxxas Rustler VXL. Graphics are pre-applied, so you just need to apply a single color of paint to finish to your liking. With the ProGraphix...

This is the Micro 4-Channel Receiver for the Traxxas E-Maxx. FEATURES:27MHz AM operationReplaces damaged receiver INCLUDES:Installing in vehicle and connecting servos and battery SPECS:Length: 1...

This is the optional Exo-Carbon Fuel Tank Cap for the Traxxas Jato 3.3 (TRAC83**). FEATURES:Plastic constructionExo-carbon finish INCLUDES:One Fuel Tank Cap REQUIRES:Installation on the Jato 3.3

This is the optional Exo-Carbon Front Bumper for the Traxxas Jato 3.3 (TRAC83**). FEATURES:Plastic constructionExo-carbon finish INCLUDES:One Front Bumper REQUIRES:Installation on the Jato 3...

These are the Rear Suspension Arms in Exo-Carbon for the Jato from Traxxas Performance Accessories. FEATURES:Exo-Carbon finish INCLUDES:One Pair (Left and...

These are the Traxxas Jato Exo-Carbon Front Suspension Arms for use on Jato 2.5 and Jato 3.3 trucks.FitsJato 2.5Jato 3.3

This is the optional Exo-Carbon Left and Right Dirt Guards for the Traxxas Jato 3.3 (TRAC83**). FEATURES:Plastic constructionExo-carbon finish INCLUDES:Exo-Carbon Left and Right Dirt Guards for the...

This is the optional Exo-Carbon RX Cover for the Traxxas Jato 3.3 (TRAC83**). FEATURES:Plastic constructionExo-carbon finish INCLUDES:One Front Bumper REQUIRES:Installation on the Jato 3.3

This is the optional Exo-Carbon Battery Cover (Mid Chassis) for the Traxxas Jato 3.3 (TRAC83**). FEATURES:Plastic constructionExo-carbon finish INCLUDES:One Mid Chassis Battery...

This is the optional Exo-Carbon Rear Bumper/Battery Cover for the Traxxas Jato 3.3 (TRAC83**). FEATURES:Plastic constructionExo-carbon finish INCLUDES:One Rear Bumper/Battery...

This is a set of Traxxas 6061 T-6 Aluminum Front and Rear Bumpers for the Traxxas T-Maxx and E-Maxx trucks. These will fit all versions of the T-Maxx .15, 2.5, 3.3, E-Maxx, E-Maxx 16.8V, and...

These are Blue Anodized Aluminum Servo Mounts for the Traxxas T-Maxx. This package includes throttle/brake servo mounts and fits both the old and new versions of the T-Maxx. FEATURES:Blue...

This is the optional Traxxas Two-Speed Transmission Conversion Kit for the Traxxas E-Maxx 16.8V and E-Maxx Brushless trucks.FEATURES:Provides more torque for climbing and driving through mud, grass...

This is a 22 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck. This is the gear which is attached directly to the motor. FEATURES:Machined SteelDesigned for a 3mm shaft INCLUDES:One 22 tooth...

This is a 21 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck. This is the gear which is attached directly to the motor. FEATURES:Machined SteelDesigned for a 3mm shaft INCLUDES:One 21 tooth...

This is a 20 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck. This is the gear which is attached directly to the motor. FEATURES:Machined SteelDesigned for a 3mm shaft INCLUDES:One 20 tooth...

This is a 19 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck. This is the gear which is attached directly to the motor. FEATURES:Machined SteelDesigned for a 3mm shaft INCLUDES:One 19 tooth...

This is a 18 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck. This is the gear which is attached directly to the motor. FEATURES:Machined SteelDesigned for a 3mm shaft INCLUDES:One 18 tooth...

This is a 17 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck. This is the gear which is attacheddirectly to the motor. FEATURES:Machined SteelDesigned for a 3mm shaft INCLUDES:One 17 tooth...

This is a 16 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck. This is the gear which is attached directly to the motor. FEATURES:Machined SteelDesigned for a 3mm shaft INCLUDES:One 16 tooth...

This is a 15 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck. This is the gear which is attacheddirectly to the motor. FEATURES:Machined SteelDesigned for a 3mm shaft INCLUDES:One 15 tooth...

This is a 14 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck. This is the gear which is attached directly to the motor. FEATURES:Machined SteelDesigned for a 3mm shaft INCLUDES:One 14 tooth...

This is a 13 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck. This is the gear which is attached directly to the motor. FEATURES:Machined SteelDesigned for a 3mm shaft INCLUDES:One 13 tooth...

This is a 12 Tooth 32 Pitch Pinion Gear for the Traxxas E-Maxx Truck. This is the gear which is attached directly to the motor. FEATURES:Machined SteelDesigned for a 3mm shaft INCLUDES:One 12 tooth...