This is a pair of Traxxas Unlimited Desert Racer 139mm GTR 1.146 Rate Green Stripe Progressive Shock Springs.Stock Replacement OnUnlimited Desert Racer (UDR)

These are the Traxxas Pink Front and Rear Skid Plates for Stampede 2WD, Skully, and Craniac trucks.Fits1/10 Monster Jam TrucksCraniacSkullyStampede VXL 2WDStampede XL-5 2WD

This is a set of Traxxas LiPo Battery Charge Indicator Plug Set. The set includes four Green, four Blue, and four Grey indicator plugs. Use these plugs to know which batteries are fully charged, discharged, or in storage charge, and to protect the...

This is the Traxxas Spring, shock (GTR) (3.2 rate, purple) (1/16 Summit) (1 pair). This is Traxxas part number 7246Part Number: 7246 / TRA7246Fits1/16 Grave Digger1/16 SummitMore detail coming soon! Please check your vehicle manual to confirm vehicle...

This is the Traxxas Green Front Bumper, Mount, and Hardware for the Stampede 2WD, Craniac, Skully, and 1/10 Monster Jam Trucks.Fits1/10 Monster Jam TrucksCraniacSkullyStampede 2WD

This is a set of four Traxxas Green-Anodized Aluminum 4mm Lock Nuts with a Flanged and Serrated surface.Features May be used in any application requiring this size locknut Serrated rear section ensures sure grip Includes: Four 4mm Flanged...

This is the Traxxas 2-piece Receiver and Battery Hold Down Kit for the Stampede VXL OverviewIncludes battery hold-down (grey) (1), receiver hold-down (grey) (1), metal posts (2), spacers (2), body clips (2), servo tape, adhesive foam pad

This is the Team Integy 56-Tooth 0.8 Mod Steel Spur Gear for the Traxxas Jato 2.5, 3.3, and T-Maxx 3.3 trucks. This is MUCH stronger than a plastic spur gear. The Integy spur gears feature color-coded rings to allow easy identification. Going to a...

This is the GPM Orange Stainless Steel and Aluminum Center Drive Shaft - 5pc set. The Axle joints are thicker than stock offering more strength and power. Made with stainless steel 304, offers greater durability and rust resistance. Alloy 6061 T6 is...

This is the GPM Red Stainless Steel and Aluminum Center Drive Shaft - 5pc set. The Axle joints are thicker than stock offering more strength and power. Made with stainless steel 304, offers greater durability and rust resistance. Alloy 6061 T6 is light...

This is the GPM Green Stainless Steel and Aluminum Center Drive Shaft - 5pc set. The Axle joints are thicker than stock offering more strength and power. Made with stainless steel 304, offers greater durability and rust resistance. Alloy 6061 T6 is light...

This is the GPM Gray Silver Stainless Steel and Aluminum Center Drive Shaft - 5pc set. The Axle joints are thicker than stock offering more strength and power. Made with stainless steel 304, offers greater durability and rust resistance. Alloy 6061 T6 is...

This is the GPM Silver Stainless Steel and Aluminum Center Drive Shaft - 5pc set. The Axle joints are thicker than stock offering more strength and power. Made with stainless steel 304, offers greater durability and rust resistance. Alloy 6061 T6 is...

This is the Traxxas Slash Orange & Blue Painted Body Is it time to upgrade your Slash with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix paint with pre-applied decals. There’s no need to trim the body because...

This is the Traxxas Slash Clipless Body for the Slash 4x4, VXL and 2WD models. From mild to wild, Traxxas clear bodies are your own personal canvas. You choose the color and design and Traxxas ProGraphix paint makes it easy to get professional quality...

This is the Scalextric Pit Garage This pit lane building is the perfect addition to accessories your track layout, whether it's your first Scalextric track or a bustling multiple-lane race! Made of sturdy plastic, this building is robust and takes just...

This is the Scalextric Grandstand Bring the atmosphere of cheering crowds home to your Scalextric track today with the grandstand model to accessories your racing layout! Made of sturdy plastic, this building is robust and takes just minutes to assemble...

This is the Scalextric Control Tower What better way is there to accessories your track layout than with the Scalextric control tower?! Made of sturdy plastic, this building is robust and takes just minutes to assemble. Full assembly instructions and a...

This is the Traxxas TRX-4 2021 Ford Bronco Cyber Orange Body Complete. Pro Scale 2021 Ford Bronco bodies come fully-painted with pre-assembled body accessories for easy mounting on your TRX-4. Add a fresh look to your existing Bronco or any...

This is the Traxxas TRX-4 2021 Ford Bronco Rapid Red Body Complete. Pro Scale 2021 Ford Bronco bodies come fully-painted with pre-assembled body accessories for easy mounting on your TRX-4. Add a fresh look to your existing Bronco or any TRX-4...

This is the Traxxas TRX-4 2021 Ford Bronco Clear Body.  Traxxas clear bodies come fully-trimmed with pre-drilled body holes for easy mounting. There's also a protective overspray film applied to the body. Window masking, body accessories, and decals...

This is the Traxxas 5000mAh 14.8v 4-Cell 25C LiPo Battery (155mm). These can be used in the Maxx 4S, Unlimited Desert Racer (UDR) and X-Maxx 8S trucks.FitsMaxx 4SUnlimited Desert Racer (UDR)X-Maxx 8SSpecificationsTotal Capacity: 5000mAhVoltage: 14.8VC...

This is the Hot Racing Aluminum Fixed Steering Link with 25T Servo Horn for the Traxxas Unlimited Desert Racer. Machined from 6061-T6 aluminum and anodized in blue, these look great and help stiffen up the steering on the UDR. The clamping servo horn...

These are the RPM Black Front Right Suspension A-Arms for Traxxas E-Revo 2.0 trucks. While Traxxas may have beefed up the E-Revo 2.0 suspension arms, they’re still not nearly as tough as RPM versions, nor are they as light. RPM A-arms weigh in 5 grams...

This is the GPM Racing Stainless Steel Front and Rear Suspension Pushrod Set for the Traxxas E-Revo 2.0 Brushless trucks. Built from 304 stainless steel, these are incredibly tough. They feature tie-rod style ends for quick and easy adjustment if...

This is a pair of GPM Racing Orange Aluminum Spare Tire Locking Nuts for the Traxxas Unlimited Desert Racer (UDR) trucks. The replace the stock locknut for a far more realistic appearance. They are made of 6061-T6 aluminum and anodized for a fantastic...

These are the GPM Racing Red Aluminum Lower Suspension Arms for the Front or Rear of the Traxxas 1/10 Slash 4x4, Stampede 4x4, Rustler 4x4, XO-1, or the rear of the Stampede 2WD and Rustler 2WD vehicles. These are made of 6061-T6 aluminum for improved...

This is the GPM Black Stainless Steel and Aluminum Center Drive Shaft - 5pc set. The Axle joints are thicker than stock offering more strength and power. Made with stainless steel 304, offers greater durability and rust resistance. Alloy 6061 T6 is light...

This is the GPM Racing Hardened Steel 54-Tooth 1.0 Mod Machined Spur Gear. Made with #45 hardened steel, this gear is built for bashing!This can be used as an upgrade to the Traxxas 6449 and 6449X gears. It should only be used with steel pinion gears...

This is the Traxxas Unlimited Desert Racer Battery Door, Strap, Retainers and Latch.Stock Replacement OnUnlimited Desert Racer (UDR)

This is the Traxxas 15-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear. The heavy-duty 15-tooth (32-pitch) pinion gear is machined from...

This is the Hot Racing 90-Tooth 48-Pitch Hard Anodized Aluminum Spur Gear for Traxxas Slash 2WD, Stampede 2WD, Rustler, and Bandit. It will work with XL-5 brushed and VXL brushless trucks.FEATURES:- CNC machined 6061-T6 aluminum construction- Replaces...

This is the Hot Racing Hardened Steel 50-Tooth 0.8 Mod 32-Pitch Spur Gear for Traxxas Slash 2WD, Stampede 2WD, Rustler, Bandit, and Telluride vehicles. This gear is significantly smaller than stock, which will increase top speed over stock. It will...

This is a Traxxas Revo Big Block Installation Kit.  This fits the Revo 2.5 and 3.3.  This kit allows Revo owners the option of installing various .21-.28 size engines. The Revo big block installation kit makes it easy to...

This is a Traxxas Revo 40-Tooth Spur Gear.  This will fit the Revo 2.5 and 3.3 trucks.  The lower the number of teeth on the spur gear, the higher top end speed you will have.  The higher the number of teeth, the more torque...

This is the Viper Scale Racing V3 VSPEC-X Builders Kit The V3 VSPEC-X builders kit is here! Featuring all components to build your own V3 VSPEC-X.The VSPEC-X race car is a reliable, fast and fully up-gradable HO Scale Slot car built with high performance...

This is the Innovative Hobby 1/32 scale "Bleachers With Crowd" Photo Real Scale Building Kit PHOTO REAL SCALE BUILDINGSThere are many reasons people prefer these kits. One main reason is the level of realism that can be achieved without having to paint...

This is the Innovative Hobby 1/32 scale Diner Building Kit PHOTO REAL SCALE BUILDINGSThere are many reasons people prefer these kits. One main reason is the level of realism that can be achieved without having to paint your diorama. You also don't need...

This is the Innovative Hobby 1/32 scale Race Tower Model Building Kit PHOTO REAL SCALE BUILDINGSThere are many reasons people prefer these kits. One main reason is the level of realism that can be achieved without having to paint your diorama. You also...

This is the Innovative Hobby 1/32 scale Pit Garage Building Kit PHOTO REAL SCALE BUILDINGSThere are many reasons people prefer these kits. One main reason is the level of realism that can be achieved without having to paint your diorama. You also don't...