This is the Castle Creations 1/6 Mamba Monster X 8S 33.6V ESC with 1717-1650KV Brushless Motor. Take your scale build or upgrade to the next level with Castle’s legendary brushless power. The MAMBA MONSTER X 8S, 33.6V ESC W/1717-1650KV SENSORED...

This is the Castle Creations Sidewinder SW4 Waterproof ESC and 1410-3800Kv Brushless Motor Combo with 5mm Motor Shaft. This combo is a great setup for 2S power in vehicles like the Traxxas Slash 2WD and 4x4, or up to 3S in the 2WD Rustler, Bandit and...

This is the Castle Creations Sidewinder SW4 Waterproof ESC and 1410-3800Kv Brushless Motor Combo with 1/8" (3.17mm) Shaft. This combo is a great setup for 2S power in vehicles like the Traxxas Slash 2WD and 4x4, or up to 3S in the 2WD Rustler, Bandit and...

This is the Castle Creations Mamba X SCT Sensored 25.2V ESC with 1410-3800Kv Brushless Motor with 1/8" (3.17mm) shaft. This combo is a great setup for 2S power in vehicles like the Traxxas Slash 2WD and 4x4, or up to 3S in the 2WD Rustler, Bandit and...

This is the Castle Creations Mamba X Sensored 25.2V Waterproof ESC with 8-Amp BEC. Meet the next generation.Castle Creations is proud to announce our new flagship surface product, the MAMBA X EXTREME 1:10 SCALE WATERPROOF ESC. We at Castle wanted to...

This is the Castle Creations 1/8 Mamba Monster X 2S-6S ESC with 8-Amp BEC. Putting the X in Extreme!Mamba Monster X is our latest 1:8 scale and Monster truck controller capable of 2S - 6S LiPo, with an 8 amp peak BEC - and, it's waterproof*, so you can...

This is the Castle Creations Sidewinder SCT Waterproof ESC and 1410-3800kv Brushless Motor with 1/8" (3.17mm) Shaft. This setup is intended for 1/10 short course trucks running on 2s LiPo and weighing up to 6.5 lbs. It is also a great system and a torque...

This is the Castle Creations Sidewinder SV3 Waterproof ESC & 1406-5700Kv Brushless Motor with 1/8" (3.17mm) shaft. The 1406-5700kv motor is a great motor for 2WD short course trucks on 2s LiPo and geared conservatively. It makes a great combo for...

This is the Castle Creations Sidewinder SV3 Waterproof ESC and 1406-4600Kv Brushless Motor with 1/8" (3.17mm) shaft.  The 4600kv motor is a great motor for 2WD short course trucks on 2s LiPo and geared conservatively. It makes a great combo for...

This is the Castle Creations Sidewinder 4 Sensorless Waterproof ESC for brushed or brushless motors on 2-3S LiPo or 6-8 cell NiMH power. While the all new SIDEWINDER 4 builds upon Castle's most popular platform, the SIDEWINDER 1:10 SCALE SERIES, it is...

This is a set of GPM Racing Green Aluminum 17mm Wheel Nuts for Traxxas X-Maxx and E-Revo 2.0 trucks. This is a full set of four nuts.These fit in place of stock Traxxas part 7758 series wheel nuts.Accessory Part ForTraxxas 1/10 E-Revo 2.0Traxxas...

These are the Traxxas E-Revo 2 Heavy Duty Toe Link Rod Ends (8) with Hollow Balls.Stock Replacement OnE-Revo 2.0

These are the Traxxas Unlimited Desert Racer Steel Hex Wheel Hubs (4).Accessory Part ForUnlimited Desert Racer (UDR)

This is the Tekin RX8 Gen3 Brushless 1/8 Scale Dual Mode ESC (Sensored/Sensorless). Tekin's RX8 GEN3 brings bigger power handling capabilities and increased reliability to 1/8 Scale Racing. The RX8 platform has proven itself to handle the rigors of...

This is the Hot Racing Small Super Duty Slipper System with Pressure Plate, Hub, and Friction Pad for Slash 2WD, Slash 4x4*, Stampede 2WD, Rustler, Bandit, 1/10 Rally VXL*, Jato 3.3, and Stampede 4x4*. This will work on XL-5 brushed and VXL brushless...

This is a pair of Traxxas X-Maxx Replacement Upper Suspension Arms. These will work on the front or rear of the truck.FeaturesMolded composite plastic constructionFits both front and rear suspensionIncludes: One Left and One Right Upper Suspension Arm

This is the RPM Black Extended Right Rear A-Arm Set for 1/10 Summit (stock replacement), E-Revo 2.0 (stock replacement), 1/10 E-Revo, E-Revo Brushless, and Revo 3.3 trucks. These are replacements for Traxxas part 5333R or 8631. See Tech Notes at...

These are the RPM Black Extended Left Rear A-Arms for 1/10 Summit (stock replacement), E-Revo 2.0 (stock replacement), 1/10 E-Revo, E-Revo Brushless, and Revo 3.3 trucks. These are replacements for Traxxas part 5333R or 8632. See Tech Notes at...

These are the RPM Heavy Duty Blue Rear A-Arms for the Traxxas Electric Slash 2WD Short Course Racing Truck. The RPM rear A-arms for the Traxxas Slash 2WD are designed specifically for the electric version of the Slash. They are molded in RPM's nearly...

This is the RPM True-Track Rear A-Arm Conversion (Black) for the Traxxas T-Maxx 3.3 and E-Maxx 16.8V (model 3905), and E-Maxx Brushless trucks.  The RPM True-Track Rear A-arm Conversion kit eliminates one of the biggest headaches...

This is a Traxxas M0.8P, 50T Spur Gear. FEATURES M0.8 pitch 50 tooth Black plastic construction Compatible with 32P pinion gears INCLUDESOne M0.8P, 50T Spur Gear SPECSPitch:   M0.8Tooth:   50Outer Diameter: 41.5mm (1.63")Inner...

This is a pair of Stub Axle Carriers for the Traxxas Bandit, Stampede and Rustler VXL. FEATURES:Molded nylon construction (black) INCLUDES:Two stub axle carriers REQUIRES:Installation on the vehicle

This is a Traxxas Jato 2.5, 3.3, and T-Maxx 3.3 Antenna Crimp Nut and Antenna Nut Wrench.  This includes the antenna crimp nut and the wrench.

This is a Traxxas 37-Tooth Ring and 13-Tooth Pinion Gear Set for the Traxxas T-Maxx .15, 2.5, 2.5R, 3.3 (model 4909 only), and E-Maxx (model 3906 only).  The differential carrier is also included. FEATURES:Replaces worn differential...

This is the Pro-Line Rat Rod Clear Body for Traxxas 1/10 Revo 3.3, E-Revo, E-Revo 2.0 and Summit trucks. The body is supplied clear, but is painted in the image to better show the design. Truck is not included. FeaturesCustom Rat Rod stylingScale...

This is the Gen3 RC 8-Piece Bearing Kit for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, and 1/10 Rally Front Steering Blocks and Rear Stub Axle Carriers.Features Super durable black rubber seals offer excellent protection against the harshest...

These are the RPM Black Front Left Suspension A-Arms for Traxxas E-Revo 2.0 trucks. While Traxxas may have beefed up the E-Revo 2.0 suspension arms, they’re still not nearly as tough as RPM versions, nor are they as light. RPM A-arms weigh in 5 grams...

This is the Gen3 RC 6061-T6 Orange Aluminum Stage 3 Upgrade Set for the Traxxas Rustler 2WD trucks. This set can be used on the XL-5 and VXL versions. Made of 6061-T6 aluminum, these parts are built to improve strength, look great, and tighten up the...

This is the Hot Racing Aluminum Front Body Post Set for the Traxxas 1/16 E-Revo, Slash, and Rally vehicles. These will fit 1/16 brushed and VXL brushless versions of these cars.FEATURES:Aluminum ConstructionBlack in ColorCNC MachinedYOU WILL RECEIVE:Two...

This is a pair of Traxxas Maxx Chevron Tires with Foam Inserts for use with 3.8" Revo and T-Maxx/E-Maxx wheels. These are a great way to give you RC the true off-road monster truck look!FeaturesReplaces damaged or worn tiresConstructed of...

This is the Traxxas Bandit Wing Wire. This will fit the Bandit XL-5 and Bandit VXL buggies.

This is the Traxxas Propeller Shaft Flex Cable Set for the Traxxas Spartan Boats. Replacement propeller shaft (flex cable) SpecificationsLength: 387.35mm (15.25")Prop Shaft Diameter: 5mm (0.20")Flex Cable Diameter: 4mm (0.16") Replacement Part ForSpartan

This is the Hitec HS-5055MG Digital MG Metal-Geared Sub-Micro Servo. Providing 22 oz/in of torque at 6V, this is a great little servo for many projects. Since its introduction, the HS-55 has set the standard for affordable performance, offering...

This is a pair of RPM Chrome Revolver 2.2" Wheels for front of the Traxxas Electric Rustler and Electric Stampede 2WD, or the rear of Traxxas nitro vehicles like the Jato, Nitro Rustler, Nitro Sport, and Nitro Stampede. This can also be used on the...

This is the Team Integy Super Brushless Motor Heatsink (Red) with cooling fan for use on the Traxxas 1/16 E-Revo and Slash VXL. This heatsink snaps onto the motor can.FEATURESAluminum construction red...

This is the Short RPM Sensor for Traxxas models. FeaturesThe RPM sensor plugs directly into your TQi receiver to provide real-time speed and RPM data while you drive. Real-time telemetry requires a telemetry magnet, TQi radio with Traxxas...

This is a set of Gemini Chrome Wheels and Talon Tires for the Traxxas Revo, T-Maxx and E-Maxx. The wheels have a 17mm splined hex.FeaturesFive spoke chrome plated wheel construction Talon tires are treaded soft compound low profile construction with...

These are the Pro-Line PowerStroke Rear Shocks Spring Assortment Features Six Primary Springs (black/short) Six Secondary Springs (silver/long) Color coded stripes to identify rates Spring rate chart available showing spring all combinations and...

This is the GTR Shock Rebuild Kit by Traxxas. FEATURES:Shock rebuild parts INCLUDES:Four blue plastic shock pistonsTwo blue rubber diaphragmsFour black plastic shock endsTwo piston lock nutsFour metal X-rings COMMENTS:This set will rebuild two shocks

This is the Traxxas Front 37T Differential Ring and 13T Pinion Gear 37-tooth ring and 13-tooth pinion gears for front differentials. Replacement Part ForFord Fiesta ST RallyFord F-150 Raptor R 4X4Ford Fiesta ST Rally BrushlessFord Fiesta ST RallyHoss 4X4...