Traxxas Stampede 2WD XL-5 & VXL RC Trucks, Parts & Upgrades
Traxxas Stampede 2WD XL-5 VXL
Do you want something that’s race-ready yet still a great option for beginning model drivers or younger motorsports enthusiasts? If so, then you’re going to want the Stampede XL-5. It’s got a top speed of around 30 MPH measured in real rather than scale miles, so you can be sure that it’s going to offer a ton of real action without sacrificing a whole lot in terms of control.
In many ways, we consider the Traxxas Stampede line to be the original high-performance offload monster truck at the RC Superstore. Best of all, the stock performance figures of this vehicle can be upgraded through judicious use of aftermarket parts.
Traxxas Stampede 2WD Parts & Upgrades
While each of these models offers some serious scale horsepower, you’re eventually going to run into a situation where you might either want some replacement parts or you’re going to need to upgrade one of the underlying components. Perhaps you’ll want to start with a cooling fan or another component that includes comparable moving parts. Since these components rotate, you may want to keep a few extras on hand if you do any real hardcore driving. Motors themselves, however, are what most people are going to be looking into.
2WD Brushless Motors
Waterproof brushless motor assemblies are what makes the Stampede series so attractive. Motor brushes have to be periodically replaced on any design that makes use of them, but Stampede VXL brushless motor systems don’t require any such small parts to be installed. As a result, you can keep your vehicle running longer without having to worry about opening the physical motor housing and making adjustments. This is good news for anyone who wants to start investing in additional motors because they’re going to be seriously racing.
On top of a motor, you might want an extra battery.
Stampede LiPo Battery
Don’t get caught without the power you need to reach further destinations than you ever thought possible. Invest in an additional LiPo battery as well as NiMH/LiPo chargers so you can keep your vehicle out on the road longer. When your current pack runs down, swap it out for a fully charged one and then place it into this dock. It’ll convert mains line power into potential DC energy that your Traxxas model can use in its efficient LiPo batteries.
Stampede VXL
The Stampede VXL uses the Velineon brushless power system, which can push these trucks to over 65 MPH if you’re using LiPo power. Both the XL-5 and VXL trucks include a tri-mode speed controller that offers an optional training mode for those who are just learning to control a model that has this kind of performance. No matter what kind of driver you are, there’s something to appeal to you in these kits.
If you’re still not sure what kind of 2WD Traxxas truck might be right for you, then contact us online at the RC Superstore for more information.
-
TRA3767Traxxas Shock Caps & Bottoms: TMX .15, 2.5, Bandit, Rustler, Stampede
These are Shock Caps and Bottoms for Traxxas kits. Shock caps (2) and shock bottoms (2) for Traxxas Ultra Shocks Specifications:Diameter:Tops: 16mmBottoms: 13mm Replacement Part ForFord Fiesta ST RallyHoss 4X4 VXLNitro RustlerNitro SlashRustler 4X4...$3 -
TRA1834Traxxas Standard Size Body Clips (12)
This is the Traxxas Standard Size Body Clips (12) - Standard-duty body clips Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 SummitBandit VXLBanditBIGFOOTJatoNitro RustlerRevoRustler VXLRustlerSlayer Pro 4X4Stampede...$2 -
TRA3934Traxxas Body Clips (12)
These are Traxxas Body Clips for the Traxxas Vehicles. It is always good to have extra body clips around to keep your body securely fastened. These fit all of the .15, 2.5, and 3.3 versions of these trucks, as well as many other vehicles...$3 -
GPM-RUS003F-ORGPM Orange Aluminum Front Bumper for 2WD Stampede Rustler Bandit
This is the GPM Racing Orange Aluminum Front Bumper for Traxxas Rustler 2WD, Stampede 2WD, Bandit and several other vehicles listed below. Made of 6061-T6 aluminum, these are durable and look great.These are replacements for Traxxas part 2735.Accessory...$999 -
RPM70942RPM ESC Cage for Traxxas VXL-3s ESC 3355R (Black)
This is the RPM Black ESC Cage for the Traxxas 3355R VXL-3s ESC. RPM had numerous requests for an ESC Cage for the #3355R version of the Traxxas VXL-3S ESC since the mounting tabs have been reported to us as weak. Why risk potential damage to your $220...$779 -
RPM73762RPM Black ESC Cage for Castle Mamba X on Traxxas
This is the RPM Black ESC Cage to use the Castle Mamba X ESC on Traxxas Slash 2WD, Slash 4x4, Stampede 4x4, and 1/10 Rally VXL. This can also be used on the Rustler, Stampede 2WD, and Bandit when the Traxxas 3725 mounting plate is on the vehicle (stock...$749 -
TRA3678ATraxxas Green Wheelie Bar Assembly for Slash, Stampede, Rustler, Bandit
This is the Traxxas Green Wheelie Bar for the Slash 2WD, electric Stampede 2WD, Skully, Craniac, electric Rustler, and Bandit vehicles.The unique patent-pending Traxxas adjustable wheelie bar features four position adjustment, plus it quickly and easily...$15 -
TRA3628Traxxas Sealed Waterproof Receiver Box & Hardware
This is the Traxxas Sealed Waterproof Receiver Box with Hardware. Sealed receiver box for Traxxas micro receivers.IncludesOne Receiver BoxOne Rubber SealFoam PaddingTwo 2.5x8mm Cap Head ScrewsTwo 3x10mm Cap Head ScrewsTwo 2.5x10mm Cap Head...$12 -
TRA2656Traxxas XX-Long Chrome Steel Shock Shafts (2)
These are the Traxxas XX-Long Chrome Steel Shock Shafts. Each package includes two shock shafts. Replacement steel shock shafts with chrome finish for Traxxas long Ultra Shocks (2) Replacement Part ForBIGFOOT No. 1 Officially Licensed ReplicaFord F-150...$3 -
TRA1747Traxxas 4mm Stainless Steel Lock Nuts
These are Traxxas 4mm Stainless Locking Nuts. These will fit many different Traxxas vehicles, and are a great item to keep in your toolbox.Features:Stainless steel construction.Nylon insert.Includes:Six Lock NutsSpecifications:Size: 4mm$2 -
GPM-CRA022-RGPM Red Aluminum Rear Stub Axle Carriers for 2WD Slash Rustler Stampede Bandit
These are the GPM Racing Red Aluminum Rear Stub Axle Carriers for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, and Bandit vehicles.This is a direct replacement for Traxxas part 3752 hub carriers.Accessory Part ForTraxxas 1/10 Monster Jam...$1399 -
G3R-T1001-SILVERGen3 RC Silver Aluminum Suspension Upgrade for Traxxas 1/10 2WD Slash Rustler Stampede
This is the Gen3 RC 6061-T6 Black Aluminum Stage 1 Upgrade Set for the Traxxas Rustler, Stampede 2WD, and Slash 2WD trucks. This set can be used on the XL-5 and VXL versions. Made of 6061-T6 aluminum, these parts are built to improve strength, look...$49.99 $2499 -
TRA3758ATraxxas Green Front Springs (2) for Long Ultra Shocks
These are the Traxxas Green Front Springs (2) for Long Ultra Shocks found on vehicles like the Stampede, Craniac, Skully, Bigfoot, and other trucks based on the Stampede chassis.Accessory Part ForBIGFOOT No. 1 Officially Licensed ReplicaHoss 4X4...$5 -
TRA3632PTraxxas Pink Aluminum 30-Degree Caster Block Set: Rustler, Stampede, Slash
This is the Traxxas Pink Aluminum 30-Degree Caster Block Set for Rustler, Stampede 2WD, Slash 2WD, and Nitro Slash trucks. These will fit XL-5 brushed and VXL brushless versions.Fits1/10 Monster Jam TrucksCraniacNitro SlashRustler VXLRustler...$1995 -
RPM80249RPM Red Front A-Arms for Slash 2WD/Rustler/Stampede 2WD
These are the RPM Red Front Suspension A-Arms for Traxxas Slash 2WD, Rustler XL-5 & VXL, Stampede 2WD XL-5 & VXL, and Nitro Slash trucks. The arms work with all variations of the electric Stampede 2WD, including Skully, Craniac, and Bigfoot trucks.RPM...$799 -
HRATRX15EPHot Racing HD Aluminum Slipper Plate & Hub for Stampede, Slash, Rustler, Bandit, Jato
This is the Hot Racing HD CNC Machined Hard Anodized Aluminum Slipper Plate and Hub for the 1/10 Traxxas Bandit, Jato 3.3, Rally*, Rustler, Slash 2WD, Slash 4X4*, Stampede 2WD, and Stampede 4X4*. This item is a replacement for Traxxas 5556.*For high...$1488 -
TRA3737ATraxxas Blue Aluminum 39mm Camber Link Turnbuckle Set
This is the Traxxas Blue Aluminum 39mm Camber Link Turnbuckle assembled with rod ends and hollow balls. Search our store for part 3741A for complete camber link set.Fits:1/10 Monster Jam TrucksBigfootCraniacNitro SlashRustler VXLRustler XL-5SkullySlash...$6 -
TRA3629Traxxas Receiver Box Seal Kit (O-ring, Seals, & Silicone Grease)
This is the Traxxas Receiver Box Seal Kit with O-ring, Seals, and Silicone Grease. This is for use on with the 3628 waterproof receiver box. Refresh your 3628 sealed receiver box with this seal kit. Includes new O-ring, foam seal, and silicone grease...$4 -
TRA3772Traxxas 2.8" Chrome Rear All-Star Wheels for Rustler, Stampede
These are the Traxxas 2.8" Chrome Rear All-Star Wheels for electric Rustler and Stampede 2WD trucks.Fits1/10 Monster Jam TrucksCraniacMonster JamRustler VXLRustler XL-5SkullySon-Uva-DiggerStampede VXL 2WDStampede XL-5 2WD$795 -
TRA2419Traxxas 48P Pinion Gear w/Set Screw: 19T
This is a Traxxas 19T 48P Pinion Gear. FEATURES:Metal constructionGrey in color INCLUDES:One 19T 48P Pinion GearOne Set Screw REQUIRES:Installation$3 -
TRA2070Traxxas 2070 Digital High-Torque Ball-Bearing Servo
This is the Digital High Torque Traxxas Servo. FEATURES:Ball bearingsBlack plastic construction INCLUDES:One digital high torque ball bearing servo SPECS:Ratings such as speed and torque have not been provided by Traxxas.Length: 2.16" (55mm)Width: .78"...$3495 -
TRA4607Traxxas Ball Bearings, 5x11x4mm: Nitro 4-Tec, Rustler, Stampede, Jato
This is the Traxxas 5x11x4mm Ball Bearing Set. This includes eight ball bearings. These are used in many of the Traxxas vehicles. FeaturesMade of Stainless steelShielded on both sides (not rubber sealed) Includes8 ball bearings Specs5mm...$24 -
GPM-SLA2W055-RGPM Red Aluminum Front Suspension Arms fits 2WD Stampede Rustler Slash
These are the GPM Racing Red Aluminum Front Suspension Arms for Traxxas Slash 2WD, Rustler 2WD, and Stampede 2WD trucks. Made of 6061-T6 aluminum and anodized for a great looking finish, these are tough and help make your truck stand out. Hinge pins and...$2690 -
GPM-SLA2W030-BKGPM Black Aluminum Rear Shock Tower for 2WD Stampede Rustler Slash
This is the GPM Racing Black Aluminum Rear Shock Tower for Traxxas Slash 2WD, Rustler 2WD, and Stampede 2WD trucks. Made of 6061-T6 aluminum with an anodized finish, these are durable and help make your truck stand out! Stainless steel mounting hardware...$2190 -
GPM-CRA028-GGPM Green Aluminum Front Shock Tower for 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Green Aluminum Front Shock Tower for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, Bandit, and Nitro Stampede trucks.This is a direct replacement for the stock Traxxas part 3639 shock tower.Accessory Part ForTraxxas 1/10...$999 -
GPM-CRA022-ORGPM Orange Aluminum Rear Stub Axle Carriers for 2WD Stampede Rustler Slash Bandit
These are the GPM Racing Orange Aluminum Rear Stub Axle Carriers for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, and Bandit vehicles.This is a direct replacement for Traxxas part 3752 hub carriers.Accessory Part ForTraxxas 1/10 Monster Jam...$1399 -
TRA3758RTraxxas Red Front Springs (2) for Long Ultra Shocks
These are the Traxxas Red Front Springs (2) for Long Ultra Shocks found on vehicles like the Stampede, Craniac, Skully, Bigfoot, and other trucks based on the Stampede chassis.Accessory Part For1/10 Monster Jam TrucksCraniacSkullyStampede 4x4 VXLStampede...$5 -
RPM81269RPM Red HD Camber Links for Stampede 2WD & Rustler
This is the RPM Red Heavy Duty Camber Link Set for Traxxas electric Rustler, Stampede 2WD, Skully, Craniac, and Bigfoot trucks. These are direct replacements for the molded links on the XL-5 versions of these trucks. These replace Traxxas 3641 and...$449 -
HRASTE100MR128Hot Racing Rear Multi-Rate Springs (3 Pairs) for Slash 2WD, Stampede 2WD, Rustler
These are the Hot Racing Rear Multi-Rate Springs (3 Pairs) for Slash 2WD, Stampede 2WD, Rustler. These work on the rear of the XL-5 brushed and VXL brushless versions of these trucks.FEATURES:- Spring steel construction- Multi-rate springs allow the...$1388 -
TRA3652GTraxxas Green Aluminum Stub Axle Carriers - Slash 2WD Rustler Stampede 2WD Bandit
This is a pair of Traxxas Green 6061-T6 Aluminum Stub Axle Carriers with Bearings for the Slash 2WD, Rustler, Stampede 2WD, and Bandit vehicles.Features6061-T6 aluminum constructionAnodized green in colorIncludesTwo Aluminum Rear Stub AxlesFour 5x11mm...$2995 -
TRA5556Aluminum Slipper Pressure Plate & Hub: Jato
This is a Traxxas Jato 2.5 and 3.3 Aluminum Slipper Pressure Plate and Hub.$8 -
TRA3655-BLUETraxxas Front/Rear Heavy Duty Blue Suspension Arms (Left & Right) (2)
This is the Traxxas Front/Rear Heavy Duty Blue Suspension Arms (Left & Right) (2) Heavy-duty suspension arms for Stampede, Rustler, Slash, Jato 4X4 and more feature our latest proprietary composite material. Traxxas designed this composite...$12 -
TRA3655-REDTraxxas Front/Rear Heavy Duty Red Suspension Arms (Left & Right) (2)
This is the Traxxas Front/Rear Heavy Duty Red Suspension Arms (Left & Right) (2) Heavy-duty suspension arms for Stampede, Rustler, Slash, Jato 4X4 and more feature our latest proprietary composite material. Traxxas designed this composite...$12 -
TRA3655-BLKTraxxas Front/Rear Heavy Duty Black Suspension Arms (Left & Right) (2)
This is the Traxxas Front/Rear Heavy Duty Black Suspension Arms (Left & Right) (2) Heavy-duty suspension arms for Stampede, Rustler, Slash, Jato 4X4 and more feature our latest proprietary composite material. Traxxas designed this composite...$12 -
TRA3655-GRNTraxxas Front/Rear Heavy Duty Green Suspension Arms (Left & Right) (2)
This is the Traxxas Front/Rear Heavy Duty Green Suspension Arms (Left & Right) (2) Heavy-duty suspension arms for Stampede, Rustler, Slash, Jato 4X4 and more feature our latest proprietary composite material. Traxxas designed this composite...$12 -
TRA3655-ORNGTraxxas Front/Rear Heavy Duty Orange Suspension Arms (Left & Right) (2)
This is the Traxxas Front/Rear Heavy Duty Orange Suspension Arms (Left & Right) (2) Heavy-duty suspension arms for Stampede, Rustler, Slash, Jato 4X4 and more feature our latest proprietary composite material. Traxxas designed this composite...$12 -
TRA3651PTraxxas Stampede 2WD Purple Painted Body
This is the Traxxas Stampede 2WD Purple Painted Body Is it time to upgrade your Stampede with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix paint with pre-applied decals. There’s no need to trim the body or drill...$3995 -
TRA3661-BLUETraxxas Bigfoot No. 1 Assembled Body
This is the Traxxas Bigfoot No. 1 Assembled Body Bigfoot No. 1 Officially Licensed painted replica body with decals applied. Assembled with body support for clipless mounting. Replacement Part ForBIGFOOT No. 1 Officially Licensed Replica Accessory Part...$7995 -
TRA3747Traxxas BIGFOOT Body Support With Front & Rear Latches For Clipless Body Mounting
This is the Traxxas BIGFOOT Body Support With Front & Rear Latches For Clipless Body Mounting Body Support With Front & Rear Latches For Clipless Body Mounting Includes(6) 2.6x15mm BCS Replacement Part ForBIGFOOT No. 1 Officially Licensed...$8 -
TRA6786XTraxxas 4X4 Stainless Steel Bearing Kit
This is the Traxxas 4X4 Stainless Steel Bearing Kit. Boost performance and reduce maintenance with this stainless steel bearing kit. The bearing kit replaces the standard bearings with high quality stainless steel bearings for long-lasting performance in...$6495