Traxxas Stampede 2WD XL-5 & VXL RC Trucks, Parts & Upgrades
Traxxas Stampede 2WD XL-5 VXL
Do you want something that’s race-ready yet still a great option for beginning model drivers or younger motorsports enthusiasts? If so, then you’re going to want the Stampede XL-5. It’s got a top speed of around 30 MPH measured in real rather than scale miles, so you can be sure that it’s going to offer a ton of real action without sacrificing a whole lot in terms of control.
In many ways, we consider the Traxxas Stampede line to be the original high-performance offload monster truck at the RC Superstore. Best of all, the stock performance figures of this vehicle can be upgraded through judicious use of aftermarket parts.
Traxxas Stampede 2WD Parts & Upgrades
While each of these models offers some serious scale horsepower, you’re eventually going to run into a situation where you might either want some replacement parts or you’re going to need to upgrade one of the underlying components. Perhaps you’ll want to start with a cooling fan or another component that includes comparable moving parts. Since these components rotate, you may want to keep a few extras on hand if you do any real hardcore driving. Motors themselves, however, are what most people are going to be looking into.
2WD Brushless Motors
Waterproof brushless motor assemblies are what makes the Stampede series so attractive. Motor brushes have to be periodically replaced on any design that makes use of them, but Stampede VXL brushless motor systems don’t require any such small parts to be installed. As a result, you can keep your vehicle running longer without having to worry about opening the physical motor housing and making adjustments. This is good news for anyone who wants to start investing in additional motors because they’re going to be seriously racing.
On top of a motor, you might want an extra battery.
Stampede LiPo Battery
Don’t get caught without the power you need to reach further destinations than you ever thought possible. Invest in an additional LiPo battery as well as NiMH/LiPo chargers so you can keep your vehicle out on the road longer. When your current pack runs down, swap it out for a fully charged one and then place it into this dock. It’ll convert mains line power into potential DC energy that your Traxxas model can use in its efficient LiPo batteries.
Stampede VXL
The Stampede VXL uses the Velineon brushless power system, which can push these trucks to over 65 MPH if you’re using LiPo power. Both the XL-5 and VXL trucks include a tri-mode speed controller that offers an optional training mode for those who are just learning to control a model that has this kind of performance. No matter what kind of driver you are, there’s something to appeal to you in these kits.
If you’re still not sure what kind of 2WD Traxxas truck might be right for you, then contact us online at the RC Superstore for more information.
-
TRA3638RTraxxas Rear Shock Tower (For Clipless Body Mounting)
This is the Traxxas Rear Shock Tower (For Clipless Body Mounting) Replacement rear shock tower for clipless bodies Replacement Part ForBIGFOOT No. 1 Officially Licensed ReplicaFord F-150 RaptorRustler BrushlessRustlerSlash Brushless EHDSlash Brushless...$450 -
GPM-CRA030A-GSGPM Aluminium Rear Shock Stay Mount (Gray Silver)
This is the GPM Aluminium Rear Shock Stay Mount (Gray Silver) Accessory Part ForTraxxas 1/10 Monster Jam TrucksTraxxas Bandit VXLTraxxas Bandit XL-5Traxxas CraniacTraxxas Rustler VXL 2WDTraxxas Rustler XL-5 2WDTraxxas SkullyTraxxas Slash 2WDTraxxas Slash...$599 -
RCZTRA131RC Screwz Traxxas Bigfoot 2WD (36234-8) Stainless Steel Screw Kit
This is the RC Screwz Traxxas Bigfoot 2WD (36234-8) Stainless Steel Screw Kit. RCScrewZ Stainless Screw Kits are the best way to beef up the hardware throughout your RC vehicle in one convenient package. Your new kit will include everything needed to do...$2699 -
GPM-CRA030-BKGPM Black Aluminum Rear Shock Tower for 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Black Aluminum Rear Shock Tower for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, and Bandit vehiclesThis is a direct replacement for the stock Traxxas part 3638 shock tower.Accessory Part ForTraxxas 1/10 Monster Jam...$1699 -
GPM-CRA028-RGPM Red Aluminum Front Shock Tower for 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Red Aluminum Front Shock Tower for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, Bandit, and Nitro Stampede trucks.This is a direct replacement for the stock Traxxas part 3639 shock tower.Accessory Part ForTraxxas 1/10...$999 -
TRA3689Traxxas 2.8 Paddle Tires on Black Chrome Wheels for 2WD Stampede Rear
This is a pair of Traxxas Paddle Tires Pre-Mounted on Black Chrome 2.8" Wheels for the rear of Stampede 2WD trucks. Add these to your truck for better grip in sand, snow, and mud!FitsBigfoot & Monster Jam trucks (rear)Stampede XL-5 2WD (rear)Stampede VXL...$3995 -
HRASTE90MR128Hot Racing Front Multi-Rate Springs (3 Pairs) for Slash 2WD, Stampede 2WD, Rustler
These are the Hot Racing Front Multi-Rate Springs (3 Pairs) for Traxxas Slash 2WD, Stampede 2WD, and Rustler trucks. These will work on the XL-5 brushed and VXL brushless trucks.FEATURES:Spring Steel ConstructionMulti-Rate Springs, Dual-Rate (DRS) allow...$1488 -
TRA6757Traxxas Rebuild kit, steel-splined constant-velocity driveshafts (includes pins, dustboots, lube, and hardware)
This is the Traxxas Rebuild kit, steel-splined constant-velocity driveshafts (includes pins, dustboots, lube, and hardware). Rebuild your Traxxas steel CV driveshafts with this kit. Each kit contains the pins, dust boots, grease, and hardware to...$18 -
RPM82053RPM Chrome Rear Revolver 2.2" Wheels for Electric Rustler, Stampede
This is a pair of RPM Chrome Rear Revolver 2.2" Wheels for the Traxxas Electric Rustler and Electric Stampede.Pull the trigger on the competition when you equip your ride with some loaded Revolvers from RPM! The Revolvers for 1/10th scale trucks are...$749 -
TRA2668Traxxas Spring Retainers & Spacers for Big Bore Shocks
These are the Traxxas Big Bore Shock Upper and Lower Spring Retainers and 5 different thicknesses of spring pre-load spacers, from 1mm to 8mm. Replacement Big Bore Shock retainer set features upper and lower spring retainers (2), and spring pre-load...$550 -
TRA6537Traxxas Wire Retainer/Gear Cover w/Screws
This is the Wire Retainer/Gear Cover for use with many Traxxas vehicles using the TQi telemetry system, including the Bandit, E-Maxx, Rustler, Slash 2WD, Stampede 2WD, Stampede 4x4, and X-Maxx.FeaturesPlastic constructionBlack in colorIncludesWire...$3 -
TRA2582Traxxas Buttonhead Screws 3x30mm (6)
These are Traxxas 3x30mm Button Head Screws (6). Features: Steel construction Black in color Button head design Includes: Six 3x30mm button head screws Specifications:Length: 1-3/16" (30mm)Diameter: 1/8" (3mm)$250 -
RRP8722Robinson Extra Hard 5mm Bore 22T Pinion 0.8 Mod (31.75P)
This is the Robinson Racing Extra Hard 22-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless,...$849 -
TRA3639Traxxas Front Shock Tower: Stampede, Rustler, Bandit, Slash
This is a stock replacement FRONT shock tower. SPECS:Height: 2 3/4"Thickness: 1/4"Width at base: 2 3/4"Width at top: 2" INCLUDES:(1) Front shock tower Replacement Part ForBandit VXLBanditBIGFOOT No. 1 Officially Licensed ReplicaDrag SlashFord F-150...$4 -
RCZTRA133RC Screwz Traxxas Stampede 2WD BL-2S (36354-4) Stainless Steel Screw Kit
This is the RC Screwz Traxxas Stampede 2WD BL-2S (36354-4) Stainless Steel Screw Kit. RCScrewZ Stainless Screw Kits are the best way to beef up the hardware throughout your RC vehicle in one convenient package. Your new kit will include everything needed...$2999 -
RCZTRA021RC Screwz Traxxas Stampede XL-5 2WD Stainless Steel Screw Kit
This is the RC Screwz Traxxas Stampede XL-5 2WD Stainless Steel Screw Kit. RCScrewZ Stainless Screw Kits are the best way to beef up the hardware throughout your RC vehicle in one convenient package. Your new kit will include everything needed to do a...$2399 -
GPM-RUS003F-BKGPM Black Aluminum Front Bumper for 2WD Stampede Rustler Bandit
This is the GPM Racing Black Aluminum Front Bumper for Traxxas Rustler 2WD, Stampede 2WD, Bandit and several other vehicles listed below. Made of 6061-T6 aluminum, these are durable and look great.These are replacements for Traxxas part 2735.Accessory...$999 -
TRA3432Traxxas Curved Tip Body Scissors
This is the Traxxas Curved Tip Heavy Duty Body Scissors for cutting and trimming polycarbonate RC bodies. To do a good job on a custom body, the right tools are a must. Having both a curved tip and straight tip (Traxxas part TRA3431) scissors in your...$895 -
TRA3431Traxxas Straight Tip Body Scissors
This is the Traxxas Straight Tip Heavy Duty Body Scissors for cutting and trimming polycarbonate RC bodies. To do a good job on a custom body, the right tools are a must. Having both a straight tip and curved tip (Traxxas part TRA3432) scissors in your...$895 -
RPM73754RPM Green Front Bulkhead for Traxxas 2WD
This is the RPM Green Front Bulkhead for Traxxas 2WD trucks, including the Slash 2WD, Nitro Slash, Rustler, Nitro Rustler, Stampede 2WD, Skully, Craniac, Bigfoot, Nitro Stampede, and Bandit trucks and buggies.This part is a direct replacement for Traxxas...$899 -
TRA5185Traxxas Replacement Rubber Wheelie Bar Tires
This is a pair of Traxxas Replacement Wheelie Bar Rubber Tires for the Traxxas aluminum aftermarket wheel sets (part 5186 & 5186A) used on many vehicles.Includes: Two Rubber Tires for the Wheelie BarSpecificationsOuter Diameter: 1.1" (29mm)Inner...$7 -
TRA2591Traxxas 3x23mm Buttonhead Hex Machine Screws (6)
These are the Traxxas 3x23mm Buttonhead Hex Machine Screws. Each package includes six screws.Replacement part forBandit VXLDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0Ford F-150 RaptorFord Fiesta ST RallyHoss 4X4 VXLRustler 4X4...$250 -
RRP8718Robinson Extra Hard 5mm Bore 18T Pinion 0.8 Mod (31.75P)
This is the Robinson Racing Extra Hard 18-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless,...$899 -
TRA3767Traxxas Shock Caps & Bottoms: TMX .15, 2.5, Bandit, Rustler, Stampede
These are Shock Caps and Bottoms for Traxxas kits. Shock caps (2) and shock bottoms (2) for Traxxas Ultra Shocks Specifications:Diameter:Tops: 16mmBottoms: 13mm Replacement Part ForFord Fiesta ST RallyHoss 4X4 VXLNitro RustlerNitro SlashRustler 4X4...$3 -
TRA1815Traxxas Body Washers
This is the Traxxas replacement Body Washers. FEATURES Nylon construction Helps prevent the body mount hole from cracking prematurely White in color SPECSOuter Diameter: 0.87" (22mm)Inner Diameter: 0.26" (6.7mm) INCLUDESEight large body mount washers$2 -
TRA3934Traxxas Body Clips (12)
These are Traxxas Body Clips for the Traxxas Vehicles. It is always good to have extra body clips around to keep your body securely fastened. These fit all of the .15, 2.5, and 3.3 versions of these trucks, as well as many other vehicles...$3 -
GPM-RUS003F-ORGPM Orange Aluminum Front Bumper for 2WD Stampede Rustler Bandit
This is the GPM Racing Orange Aluminum Front Bumper for Traxxas Rustler 2WD, Stampede 2WD, Bandit and several other vehicles listed below. Made of 6061-T6 aluminum, these are durable and look great.These are replacements for Traxxas part 2735.Accessory...$999 -
RPM70942RPM ESC Cage for Traxxas VXL-3s ESC 3355R (Black)
This is the RPM Black ESC Cage for the Traxxas 3355R VXL-3s ESC. RPM had numerous requests for an ESC Cage for the #3355R version of the Traxxas VXL-3S ESC since the mounting tabs have been reported to us as weak. Why risk potential damage to your $220...$779 -
RPM73762RPM Black ESC Cage for Castle Mamba X on Traxxas
This is the RPM Black ESC Cage to use the Castle Mamba X ESC on Traxxas Slash 2WD, Slash 4x4, Stampede 4x4, and 1/10 Rally VXL. This can also be used on the Rustler, Stampede 2WD, and Bandit when the Traxxas 3725 mounting plate is on the vehicle (stock...$749 -
TRA3678ATraxxas Green Wheelie Bar Assembly for Slash, Stampede, Rustler, Bandit
This is the Traxxas Green Wheelie Bar for the Slash 2WD, electric Stampede 2WD, Skully, Craniac, electric Rustler, and Bandit vehicles.The unique patent-pending Traxxas adjustable wheelie bar features four position adjustment, plus it quickly and easily...$15 -
TRA3628Traxxas Sealed Waterproof Receiver Box & Hardware
This is the Traxxas Sealed Waterproof Receiver Box with Hardware. Sealed receiver box for Traxxas micro receivers.IncludesOne Receiver BoxOne Rubber SealFoam PaddingTwo 2.5x8mm Cap Head ScrewsTwo 3x10mm Cap Head ScrewsTwo 2.5x10mm Cap Head...$12 -
TRA2656Traxxas XX-Long Chrome Steel Shock Shafts (2)
These are the Traxxas XX-Long Chrome Steel Shock Shafts. Each package includes two shock shafts. Replacement steel shock shafts with chrome finish for Traxxas long Ultra Shocks (2) Replacement Part ForBIGFOOT No. 1 Officially Licensed ReplicaFord F-150...$3 -
GPM-CRA022-RGPM Red Aluminum Rear Stub Axle Carriers for 2WD Slash Rustler Stampede Bandit
These are the GPM Racing Red Aluminum Rear Stub Axle Carriers for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, and Bandit vehicles.This is a direct replacement for Traxxas part 3752 hub carriers.Accessory Part ForTraxxas 1/10 Monster Jam...$1399 -
G3R-T1001-SILVERGen3 RC Silver Aluminum Suspension Upgrade for Traxxas 1/10 2WD Slash Rustler Stampede
This is the Gen3 RC 6061-T6 Black Aluminum Stage 1 Upgrade Set for the Traxxas Rustler, Stampede 2WD, and Slash 2WD trucks. This set can be used on the XL-5 and VXL versions. Made of 6061-T6 aluminum, these parts are built to improve strength, look...$49.99 $2499 -
TRA3758ATraxxas Green Front Springs (2) for Long Ultra Shocks
These are the Traxxas Green Front Springs (2) for Long Ultra Shocks found on vehicles like the Stampede, Craniac, Skully, Bigfoot, and other trucks based on the Stampede chassis.Accessory Part ForBIGFOOT No. 1 Officially Licensed ReplicaHoss 4X4...$5 -
TRA3632PTraxxas Pink Aluminum 30-Degree Caster Block Set: Rustler, Stampede, Slash
This is the Traxxas Pink Aluminum 30-Degree Caster Block Set for Rustler, Stampede 2WD, Slash 2WD, and Nitro Slash trucks. These will fit XL-5 brushed and VXL brushless versions.Fits1/10 Monster Jam TrucksCraniacNitro SlashRustler VXLRustler...$1995 -
RPM80249RPM Red Front A-Arms for Slash 2WD/Rustler/Stampede 2WD
These are the RPM Red Front Suspension A-Arms for Traxxas Slash 2WD, Rustler XL-5 & VXL, Stampede 2WD XL-5 & VXL, and Nitro Slash trucks. The arms work with all variations of the electric Stampede 2WD, including Skully, Craniac, and Bigfoot trucks.RPM...$799 -
HRATRX15EPHot Racing HD Aluminum Slipper Plate & Hub for Stampede, Slash, Rustler, Bandit, Jato
This is the Hot Racing HD CNC Machined Hard Anodized Aluminum Slipper Plate and Hub for the 1/10 Traxxas Bandit, Jato 3.3, Rally*, Rustler, Slash 2WD, Slash 4X4*, Stampede 2WD, and Stampede 4X4*. This item is a replacement for Traxxas 5556.*For high...$1488 -
TRA3737ATraxxas Blue Aluminum 39mm Camber Link Turnbuckle Set
This is the Traxxas Blue Aluminum 39mm Camber Link Turnbuckle assembled with rod ends and hollow balls. Search our store for part 3741A for complete camber link set.Fits:1/10 Monster Jam TrucksBigfootCraniacNitro SlashRustler VXLRustler XL-5SkullySlash...$6 -
TRA3629Traxxas Receiver Box Seal Kit (O-ring, Seals, & Silicone Grease)
This is the Traxxas Receiver Box Seal Kit with O-ring, Seals, and Silicone Grease. This is for use on with the 3628 waterproof receiver box. Refresh your 3628 sealed receiver box with this seal kit. Includes new O-ring, foam seal, and silicone grease...$4