Slayer Pro 4x4

This is the 2.6 rate Spring Set for the Traxxas GTR Shocks used on the Revo. FEATURES:Spring Steel ConstructionRed Outer Nylon CoatingYellow 2.6 tension rating INCLUDES:Two Red 2.6 Springs for the Traxxas GTR Shocks used on the...

This is a Traxxas Progressive 3 Rocker Arm Set for the Revo 2.5 and 3.3 trucks.  These fit TRA5319 and TRA5319X pushrods.  If you need the pushrods too, search our store for the listed part numbers.

This is a package of Traxxas Small Rod Ends and Hollow Balls for the Revo 2.5 and 3.3 trucks.  These are used on the steering linkages of the Revo. FEATURES:Plastic constructionBlack in colorMetal Pivot Balls INCLUDES:Six Rod EndsSix Pivot...

This is a Traxxas Revo 2.5 and 3.3 Steering Servo Mount Set.  This includes two sets of servo mounts.

This is the GPM Racing Orange Aluminum Rear Shock Mount for Traxxas 1/10 E-Revo 2.0, E-Revo Brushed & Brushless, Revo 3.3, Slayer, and Summit trucks. Made of 6061-T6 aluminum, this mount is super tough and looks stunning with its anodized finish.This...

This is the GPM Racing Black Aluminum Rear Shock Mount for Traxxas 1/10 E-Revo 2.0, E-Revo Brushed & Brushless, Revo 3.3, Slayer, and Summit trucks. Made of 6061-T6 aluminum, this mount is super tough and looks stunning with its anodized finish.This...

These are the Traxxas Transmission Gearbox Halves for Revo 3.3 and Slayer trucks. This includes the rubber access plug.IncludesFront and rear gearbox halvesRubber access plugFitsRevo 3.3SlayerSlayer Pro

This is the Traxxas Primary Clutch Assembly with Pins for Revo 3.3, T-Maxx 3.3, and Slayer trucks.FitsRevo 3.3SlayerSlayer ProT-Maxx 2.5RT-Maxx 3.3

This is the Traxxas Throttle Servo Mount with Mounting Screws for the Revo 3.3, Slayer, and Slayer Pro trucks.Fits:Revo 3.3SlayerSlayer Pro

This is the Traxxas Aluminum Exhaust Header for the Revo and Slayer. Features: Aluminum construction Silver in color Fluted on tuned pipe end for better silicone coupler connection Heatsink engine mounting flange Specifications:Length: 59mm (2...

This is the Replacement Complete Gear Set for the EZ Start 2 System. The EZ Start 2 system is used on the Traxxas T-Maxx 2.5. FEATURES:White plastic gears INCLUDES:Eight different gearsOne metal 4mm sleeveOne 5x12.5mm shaft REQUIRES:The remainder of the...

This is a set of six Traxxas 4x4 Blue Aluminum Button-Head Screws for the Jato 2.5 and 3.3 trucks.

This is a Green Tension Shock Spring Set for the Revo GTR Shocks. These springs are installed on the shock bodies. FEATURES:Red in colorTan band on spring indicates 4.1 tension rating INCLUDES:Two 4.1 rear shock springs REQUIRES:Nothing.  These are...

This is a Traxxas 40mm Vented Steel Brake Disc for the Revo 2.5 and 3.3 trucks.  All items are brand new in the factory package, with the full manufacturer warranty.

This is the Traxxas Fuel Filler Bottle (500cc) The fuel bottle holds 500 cc of fuel and includes a long, bent, blue-anodized spout for easy filling. A rubber cap and O-ring seal make it possible to temporarily store fuel in the bottle (fuel bottles are...

This is the Traxxas Racing Sponsors Decal Sheet Dress up your model’s body with the Traxxas Racing Sponsor Decal Sheet. The decal sheet includes over 25 different full-scale sponsors including, NOS, K&N, Mechanix Wear, Holley, and Hooker...

This is the Traxxas Communication link, telemetry expander The communication link connects your Traxxas 6533 TSM receiver to the optional Telemetry Expander Module 2.0. Accessory Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLChevrolet...

This is the Traxxas Premium Speed Bit Handle (Rubber Overmold) The premium speed bit handle holds bits securely with an overmolded rubber grip to provide excellent comfort and more wrenching torque.

This is the Traxxas Spinning Carousel Rack Organize your shock oil in this spinning carousel rack. The carousel rides on bearings for smooth spinning action.

This is the Traxxas Expander Box Seal Kit Refresh your Telemetry Expander Module with this seal kit. Includes o-ring, seals, and silicone grease

This is the Traxxas RC Car/Truck Carrier Backpack Features Thick, Weather-Resistant Nylon Fabric Heavy Duty Zippers and Stitching Large Zippered Front Pockets for Tools and Parts Four-Compartment Battery Organizers Thick Padded Sidewalls Large Side...

This is the Traxxas Medium RC Car/Truck Duffle Bag Features Perfect for 1/10 and 1/8 Scale Models Thick, Weather-Resistant Nylon Fabric Heavy Duty Zippers and Stitching Large Outer Pockets for Tools, Parts, and Chargers Reinforced Carry Handles Padded...

This is the Traxxas Shoulder Strap for the #9917 Duffle Bag Add additional carrying support with the strap for your RC Car/Truck Duffle Bag Features Heavy Duty Shoulder Strap for Fuffel Bag with Metal Latches Padded Sleeve For Added Comfort Adjustable...

This is the Traxxas Official Team Traxxas Racing Decal Set (Flag Logo/ 6-color) The official Team Traxxas Racing Decal sheet has been revised and now includes EZ-Start, Stinger Motors, ProGraphix, TRX engines and www.Traxxas.com logos. Perfect for adding...

This is the Dynamite .19T Mach 2 Replacement Engine for Traxxas Vehicles The Dynamite Mach 2 .19T Traxxas Replacement Engine is the perfect complement for Traxxas nitro vehicles in need of a new powerplant. With no modifications needed for installation,...

This is the RPM Body Skid Rails - fits most 1/5 - 1/12 bodies These Body Skid Rails will fit nearly any scale R/C car or truck. The only requirements are, the surface must be featureless, flat or curved and have a minimum of at least 3" (76.2mm) of open...

This is the GPM Racing Black Aluminum Rear Body Post Mount Set for Traxxas 1/10 E-Revo 2.0, E-Revo Brushed & Brushless, Revo 3.3, Slayer, and Summit trucks. Made of 6061-T6 aluminum, this mount is super tough and looks stunning with its anodized...

This is the Traxxas Tires, Kumho, ultra-soft (S1 off-road racing compound) (dual profile 4.3x1.7- 2.2/3.0') (2)/ foam inserts (2).Replica Kumho tires are molded in ultra-soft S1 compound rubber for ultimate road-racing grip. The 4.3″ x 1.7″...

This is a pair of Traxxas Titanium-Nitride Coated GTR Shock Shafts for use with the Traxxas 5460-series GTR Shocks. The 5460-series GTR shocks are the shocks available for the Jato, Revo 3.3, E-Revo, Summit, Slayer, and XO-1 vehicles...

This is the Traxxas Brake Cam and Sleeve for Revo 3.3 and Slayer trucks.Includes:Brake CamSleeveFitsRevo 3.3SlayerSlayer Pro

This is the Traxxas Steering Arm and Servo Saver for Revo 3.3, Slayer, and 1/10 Summit trucks.IncludesSteering Arm with Incorporated Servo SaverServo Saver SpringPinFits1/10 SummitRevo 3.3SlayerSlayer Pro

This is the Traxxas Flywheel Nut for the TRX 2.5, 2.5R, and 3.3 nitro engines.Fits:Jato 2.5Jato 3.3Nitro Rustler 2.5Nitro SlashRevo 3.3SlayerSlayer ProS-MaxxSportmaxxT-Maxx 2.5T-Maxx 2.5RT-Maxx 3.3

These are the Traxxas 2.5x6mm Cap-Head Hex Machine Screws. These come in packages of six screws, and are used in a wide variety of Traxxas vehicles.Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL...

These are the 4.4 Black Rate Shock Springs for the Traxxas Revo, TRAC71**. FEATURES:Steel constructionPainted red w/small black stripe4.4 tension rate (slightly lighter than stock rear spring) INCLUDES:Two 4.4 Black Rate Shock Springs for the Traxxas...

This is the Rage RC Black Large Gear Bag The Rage R/C Large Gear Bag will fit a 1/8 buggy, drone, truck or boat; and will keep the model safe and your automobile interior clean after a day at the pond, field, trail or track. The bag features a zip top...

This is the Traxxas Body Reamer Cap The Traxxas body reamer is a finely-honed cutting instrument. Protect your reamer's cutting surface with this replacement aluminum cap.

This is the Traxxas Shock Oil Bottle (60cc) Create your own custom shock oil weights by combining different silicone shock oils in this mixing bottle.

This is the Traxxas Battery door TQ 2.4 transmitter (Replacement for #6516, 6517 Transmitter) Replacement battery door for 6516, 6517, 6528, 6529, and 6530 TQ transmitters Replacement Part For1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit4-Tec 2.0...

This is the Traxxas Nerf bars, chassis (black). This is Traxxas part number 5923Part Number: 5923 / TRA5923FitsSlayerSlayer ProMore detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or contact us if you have any questions.

This is the Traxxas Telemetry Expander and GPS Module 2.0 Combo Set.  Upgrade your Traxxas vehicle with this set for precision telemetry data with easy setup. This set must be used with Traxxas TQi radio systems and the #6533 TSM receiver. Expanded...