Slayer Pro 4x4

This is a pair of Traxxas Drive Yokes for the Revo, T-Maxx 3.3, E-Maxx 3905 and others. These yokes attach to the half shaft assemblies. Features: Black plastic construction <

These are 3x5mm Backplate screws for the Traxxas 2.5, 2.5R, and 3.3 engines. 3x6 mm cap-head machine screws with hex drive heads. Features: Black steel c

This is the EZ Start 2(R) Starting System from Traxxas. This is the updated replacement for the first-generation EZ Start 2 System. It features a higher torque motor for the new 3.3 race series...

This is the Traxxas TRX 3.3 Engine Piston and Sleeve for the Traxxas TRX 3.3 engines.  This fits the 3.3 engines used in the Traxxas Revo, T-Maxx, Jato, and Nitro 4-Tec vehicles.  A new pistion and...

This is the Traxxas Multi-tool (plastic) The plastic multi-tool can be used to loosen castle nuts as well as upper and lower shock caps. Replacement Part ForE-Revo VXL BrushlessHoss 4X4...

This is set of Traxxas 5525R Heavy Duty Rod Ends (8). These are used in many Traxxas vehicles, including the Stampede 2WD, Rustler, Bandit, Slayer, Jato and 1/16 Summit.Includes:8 rod...

This is the Traxxas Blue Aluminum GTR Shock Set for Jato, Revo, E-Revo, Summit, Slayer, and XO-1 vehicles. Shock oil is included. Springs are sold separately.Features Machined threaded aluminum...

These are the Traxxas 3x10mm Cap-Head Hex Machine Screws. Each package includes six screws.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Monster Jam Trucks1/10 SummitBandit VXLBandit...

These are the Traxxas Mounts for the RPM Telemetry Sensor for Nitro Engines. RPM sensor mounts allow you to mount an RPM sensor to your nitro engine. Includes<

This is an optional Traxxas Large Knurled Flywheel for use with Starter Boxes. Features: Large knurles to be gripped by rubber starter wheels

This is the Traxxas replacement piston and sleeve for the TRX Pro .15 engines. Features: ABC (Aluminum piston with a Brass sleeve or liner that is Chrome plated)

These are Traxxas 3x10mm Hex Screws (6). Features: Steel construction cap head with hexagon socket drive insert Metal lock

This is a Traxxas Steering Servo Guard Set.  These protect your steering servos If you crack or break these, you should always fix them.  Without fixing them you risk damaging your servos...

This is the Traxxas Transmission Input Slipper Shaft for the Revo 3.3, T-Maxx 3.3, and Slayer trucks.FitsRevo 3.3SlayerSlayer ProT-Maxx 2.5RT-Maxx 3.3

This is a set of Traxxas Revo Assembled GTR Anodized Shocks (4).  The GTR shocks work well with all versions of the Revo, including the 2.5, 3.3, E-Revo brushed & brushless, and the Slayer trucks. ...

This is the Traxxas Aluminum Hollow Ball Set for the Revo 3.3, 1/10 E-Revo, 1/10 Summit, Jato, and Slayer trucks. Every ounce matters! Save weight with these aluminum upgrades!Features Aluminum...

This is the Traxxas 15-Tooth 1.0 Mod Clutch bell with 5x8x0.5mm Fiber Washer and 5mm E-Clip. This clutch bell requires using 5x11x4mm ball bearings.FeaturesVented clutch bellOne piece bell...

This is a pair of Traxxas 5x10x4mm Blue Rubber-Sealed Ball Bearings. These are used on vehicles like the 1/10 E-Revo, Revo 3.3, T-Maxx, Slayer, as well as other vehicles.FeaturesMetal bearing...

These are the Traxxas 4x20mm Button-Head Hex Drive Machine Screws. Each package includes six screws. 4x20 mm button-head machine screws with hex drive heads. Set of six.Replacement part for these...

These are the Traxxas 3x15mm Cap-Head Hex Machine Screws. Each package includes six screws. These are used as head bolts on TRX 2.5 engines, and also on other areas of many vehicles.Replacement part...

This is the Traxxas Bellcrank Bushings (Plastic) set (5x8x2.5mm) (4) Includes: Set of four 5x8x2.5 mm bellcrank bushings

These are the Steering Servo Horns and Turnbuckles from Traxxas. FEATURES:Nylon construction, black in color

These are Aluminum Hex Wheel Hubs for the T-Maxx and E-Maxx Truck Kits. FEATURES:Blue anodized.Machined 6061 T-6 aluminum construction.Packaged in foam, on a bubble sealed header card.

This is the Fuel Tank Rebuilt Kit for the REVO from Traxxas. FEATURES:Rubber, slicone, plastic, & nylon construction

This is the Clutch Bell with Washer and E-Clip for the Traxxas Revo. FEATURES:Metal constructionFive cooling holes on the face of bell (bellow the teeth)

These are Traxxas 2.5x8mm Cap Head Screws (6). Features: Steel construction Black in color

This is a Package of Replacement Cush-Drive Elements for the EZ Start 2 System. FEATURES:Black plastic construction

This is the Traxxas Front, Mid-Front, and Rear Skid Plate set for the Revo 3.3, 1/10 E-Revo, and Slayer trucks.IncludesFront, mid-front, and rear skid plates(8) 3X10mm button head screws(1) 3X30mm...

This is the Traxxas Front Bulkhead for the Revo and Slayer. Features: Black plastic construction Rocker shafts preinst

This is a Traxxas TRX 2.5 and 2.5R Piston and Sleeve kit.  If you have several gallons of fuel through your engine, it may be time for a new piston and sleeve.  It is a direct replacement.  Included...

This is the Traxxas Universal Glow Plug Wrench Glow plug wrench (Universal wrench) Accessory Part ForJato 3.3Nitro RustlerNitro SlashRevo 3.3 Slayer Pro 4x4T-Maxx 3.3T-Maxx Classis

This is the Replacement EZ-Start 2 Housing Set with Hardware and Motor Bushing. Includes(5) 3x12 mm screws (1) 3x20 mm screwMotor Bushing Replacement Part ForJatoNitro RustlerNitro SlashRevoSlayer...

This is the GPM Racing Orange Aluminum Rear Body Post Mount Set for Traxxas 1/10 E-Revo 2.0, E-Revo Brushed & Brushless, Revo 3.3, Slayer, and Summit trucks. Made of 6061-T6 aluminum, this mount...

This is a set of six Traxxas 4mm Grub / Set Screws with Threadlock. Set of six 4 mm set screws (grub screws) with threadlock Replacement Part ForE-Revo VXL BrushlessJatoNitro SlashRevoSlayer Pro...

This is the Traxxas Telemetry Expander Mount 6556 for the XO-1, E-Revo*, Summit*, T-Maxx, E-Maxx, Revo 3.3, and Slayer Pro trucks. This part makes it possible to mount the #6550 Telemetry Expander...

These are the Traxxas Steel Rocker Arm Posts for the Revo and Slayer vehicles. Features: Black steel construction Includes: Two Rocker Arm Po

These are the Center Half Shafts for the Traxxas Revo 3.3. FEATURES:Constructed of hardened plasticFor front and rear driveshafts

This is the 2.6 rate Spring Set for the Traxxas GTR Shocks used on the Revo. FEATURES:Spring Steel ConstructionRed Outer Nylon CoatingYellow 2.6 tension rating

This is a Traxxas Progressive 3 Rocker Arm Set for the Revo 2.5 and 3.3 trucks.  These fit TRA5319 and TRA5319X pushrods.  If you need the pushrods too, search our store for the listed part numbers.

This is a package of Traxxas Small Rod Ends and Hollow Balls for the Revo 2.5 and 3.3 trucks.  These are used on the steering linkages of the Revo. FEATURES:Plastic c