Slayer Pro 4x4
-
TRA5365
Traxxas Brake Pad Set: Revo 2.5, 3.3, T-Maxx 3.3, Slayer
This is a Traxxas Brake Pad Set for the Revo 2.5, 3.3, and T-Maxx 3.3 trucks. These outer calipers come with a bonded friction material. Inner and outer brake calipers with bonded friction material pads Replacement Part...$750 -
TRA2053
Traxxas Servo Gear Set for 2055 & 2056 Servos
This is the Traxxas Replacement Servo Gear Set for 2055 and 2056 Servos. This is Traxxas part number 2053.$4 -
TRA5145
Traxxas Screw Pins 4x15mm (6)
This is the Traxxas 4x15mm Screw Pin Set for the Revo and other vehicles. This includes six screw pins. Features: Metal Construction Black in Color Hex Head Design Includes: Six 4mm x 15mm Black Metal Screw Pins. Specifications:Length...$350 -
TRA2575
Traxxas Buttonhead Screws 3x6mm (6)
This is a package of six 3x6mm Traxxas Button Head Screws. Features: Steel construction Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a 3x6mm button head screw is required Includes: Six...$250 -
TRA5353R
Traxxas 17mm Splined Red Aluminum Wheel Hubs, Nuts & Screw Pins (4)
These are the Traxxas 17mm Splined Red Aluminum Wheel Hubs, Nuts, & Screw Pins for the 1/10 E-Revo, E-Maxx, Summit, T-Maxx, and Revo 3.3 trucks. These allow you to run wheels with a 17mm hex size.Features: Aluminum construction, red anodized in...$2195 -
TRA5264
Traxxas Air Filter Housing w/Foam Insert for Revo & Slayer
This is the Traxxas Air Filter Housing and Foam Insert with angled air filter base for use on the Revo 2.5, 3.3, and Slayer trucks. The mounting zip-tie is included as well.FitsRevo 2.5 & 3.3SlayerSlayer Pro$12 -
TRA4933
Traxxas Pivot Balls & Pivot Ball Cap Bushings (4)
This is a set of 4 Traxxas Pivot Balls and Pivot Ball Cap Bushings. These fit the 1/10 E-Revo, 1/10 Summit, E-Maxx, T-Maxx, Revo 3.3, Slayer, and more!FeaturesReplaces stock pivot balls and pivot ball cap bushings.Pivot balls are made of steel, pivot...$6 -
TRA2046
Traxxas Servo Y-Connector for Dual-Servo Steering
This is the Traxxas Servo Y-Connector for use with Dual-Servo Steering Setups when there is only one steering channel on the receiver.FeaturesFutaba J connectors (one male to go into the RX and two female to go to the servos)IncludesOne...$4 -
TRA4933X
Traxxas Hard-Anodized 7075-T6 Aluminum Pivot Balls & Ball Cap Bushings (4)
This is a set of 4 Traxxas 7075-T6 Hard-Anodized Aluminum Pivot Balls and Pivot Ball Cap Bushings. These fit the 1/10 E-Revo, 1/10 Summit, E-Maxx, T-Maxx, Revo 3.3, Slayer, and more!These trick, hard-anodized 7075-T6 aluminum pivot balls are...$20 -
TRA5368
Linkage Set (Throttle and brake): Revo
This is a Traxxas Revo 2.5 and 3.3 Linkage Set. This includes the throttle & brake linkage, linkage rods, springs, thumb nut, & various other hardware.$8 -
RPM80332
RPM Black Snap-Tite RC Car & Truck Body Savers
This is a set of RPM Black Snap-Tite Body Savers. One of the weakest points on a Lexan body is where the body mounts to the chassis. The holes cut in the body for the body posts have a tendency to crack and fracture. This is the reason RPM designed these...$229 -
TRA5256
Traxxas O-Ring Exhaust Header for TRX 2.5, 2.5R, 3.3
This is the Traxxas Replacement O-ring Header Gasket for the Traxxas 2.5, 2.5R, and 3.3 Engines. This is located on the header of the engine. Features: Red silicone construction. Includes: One 12.2x1mm o-ring$120 -
TRA5117
Traxxas Ball Bearings, 6x12x4mm (2)
This is a pair of Traxxas 6x12mm Ball Bearings with Rubber Dirt Shields. Pair of 6x12x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction...$4 -
TRA5407
Traxxas TRX 3.3 Engine w/Pull-Start (IPS Shaft)
This is the Traxxas TRX 3.3 Racing Engine with Pull Start. This will give your Revo, T-Maxx 2.5, or Jato an unbelievable boost in performance. This is a must have upgrade. You can also use this with the factory EZ-Start. ...$21995 -
TRA5340X
Traxxas 2.5 & 3.3 Spring Mount Exhaust Header for Revo & Slayer
This is the Traxxas 2.5 and 3.3 Spring-Mounted Exhaust Header Set for the Revo 2.5, 3.3, and Slayer trucks.FitsRevo 3.3SlayerSlayer Pro$20 -
TRA5189
Traxxas 4x13mm Screw Pins with Threadlock (4)
This is a set of four Traxxas 4x13mm Screw Pins with Threadlock. These are used on many vehicles, such as the E-Maxx, T-Maxx, Revo 3.3, Slayer, and XO-1.FeaturesMetal ConstructionBlack in ColorHex Head DesignThreadlockIncludes: Four 4mm x 13mm Black...$350 -
TRA2553
Traxxas 3x15mm Countersunk Hex Head Machine Screws (6)
This is a pack of Traxxas 3x15mm Countersunk Hex Head Machine Screws. Each package includes six screws.Fits:1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitE-MaxxE-Maxx BrushlessFunny CarJato 2.5Jato 3.3Nitro 4-TecRevo 3.3SlayerSlayer ProT-Maxx 2...$250 -
TRA6542
Traxxas 35mm Flywheel with Magnet for Telemetry (RPM)
This is the Traxxas 35mm Flywheel with Magnet for use with the TQi Radio System.FeaturesFor use with Traxxas glow powered vehiclesEquipped with a magnet that enables an RPM sensor to read RPM data IncludesTraxxas 35mm Flywheel with Magnet$8 -
TRA2938X
Traxxas iD LiPo Battery Balance Adapter for Cell Voltage Checkers
This is the Traxxas iD LiPo Battery Balance Adapter for Cell Voltage Checkers. This works with 2S, 3S, and 4S ID LiPo batteries to connect them to cell voltage checkers for individual cell reading. Warning: These are not intended for charging. The...$12 -
GPM-ER2027R-G
GPM Green Aluminum 90T P2 Rear Rocker Arm Set for E-Revo & E-Revo 2.0
This is the GPM Racing Green 6061-T6 Aluminum 90T Progressive-2 Rear Rocker Arm Set for Traxxas 1/10 E-Revo, E-Revo 2.0, Summit, Revo 3.3, and Slayer Pro trucks.IncludesRocker Arm-2pcsStainless Steel Round Head Screw 3x14-4pcsLock Nut 3mm-4pcsAlloy...$2199 -
TRA5250
Traxxas TRX 2.5 & 3.3 High-Speed Needle Valve Assembly
This is the Traxxas High-Speed Needle Valve Assembly for the TRX 2.5, 2.5R, and 3.3 nitro engines. This includes the high speed need, fuel fitting, 2.5x1.15mm O-rings (2), and 5.3x7.8x.6mm crush washers (2).For use with TRX 2.5 & 3.3 engines used...$11 -
TRA2579
Traxxas 3x15mm Buttonhead Hex Machine Screws (6)
These are the Traxxas 3x15mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used across many different Traxxas vehicles.Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Summit4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL...$250 -
TRA5118
Traxxas Ball Bearings, 8x16x5mm (2): Revo, E-Maxx, Slayer
This is a pair of Traxxas 8x16x5mm Ball Bearings. These are replacements for the differential bearings in the Revo and other vehicles. Features: Stainless Construction Blue Rubber Sealed Includes: Two 8mm x 16mm Rubber Sealed...$6 -
TRA4611
Traxxas Ball Bearings 5x11x4mm
This is a pair of Traxxas 5x11x4mm ball bearings. These are used in the clutch bells of many of the Traxxas vehicles. Features:Ball bearings reduce friction and last longer than bushings.Chrome steel construction.Used to upgrade from...$6 -
TRA2056
Traxxas 2056 High-Torque Waterproof Servo: E-Maxx
This is the replacement High Torque Waterproof Servo for the Traxxas E-Maxx (TRAC92**). FEATURES:Plastic waterproof blue case INCLUDES:One high torque waterproof servo with J style connector REQUIRES:Mounting in the E-Maxx SPECS:Length: 2.16"...$3395 -
TRA5224
Traxxas Engine Connecting Rod for TRX 2.5, 2.5R, 3.3 Engines
This is the Traxxas Engine Connecting Rod for TRX 2.5, 2.5R, and 3.3 Nitro Engines.FeaturesAluminum constructionPre-installed bushingSpecificationsLength: 37mm (1.46")Thickness: 3mm (0.12")Fits:Jato 3.3Nitro 4-TecNitro Rustler 2.5Nitro SlashRevo 2.5 & 3...$29 -
TRA2576
Traxxas Buttonhead Screws 3x8mm (6)
These are Traxxas 3x8mm Button Head Screws (6). Features: Black steel construction with hex headIncludes: Six screws Replacement part for these models1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 SummitBandit VXLBlastDrag Slash 1967 Chevrolet...$250 -
TRA5465
Traxxas GTR Shock Cap & Spring Retainers: Revo, Slayer
These are the replacement GTR Shock Retainers for the Traxxas Nitro Revo Monster Truck. FEATURES:Nylon ConstructionBlack in Color INCLUDES:Two Black Nylon GTR Shock CapsTwo Black Nylon GTR Spring AdjustersTwo Black Nylon GTR Spring RetainersTwo Black...$5 -
TRA5379R
Traxxas Machined Spiral Cut Differential Ring & Pinion Gears (Front)
This is the Traxxas Machined Spiral Cut Front Differential Ring and Pinion Gear. These are used as an upgrade over the 5379X gears found in many vehicles. Spiral-cut 37-tooth ring and 13-tooth pinion front differential gear sets are CNC-machined from a...$3995 -
TRA5364X
Traxxas High-Performance Vented Brake Disc for Revo, Slayer, T-Maxx 3.3
This is the Traxxas High-Performance Vented Brake Disc for Revo, Slayer, and T-Maxx 3.3 trucks. The vented design dissipates heat better for stronger, more consistent braking throughout a run.FeaturesSteel construction, silver in colorTrue vented design...$1995 -
TRA3937
Traxxas 4x12mm Button-Head Hex Machine Screws (6)
This is a package of six Traxxas 4x12mm Button-Head Hex Machine Screws. Replacement part for these modelsDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0E-Revo VXL BrushlessFord F-150 RaptorFord Fiesta ST RallyHoss 4X4...$250 -
TRA2577
Traxxas 3x10mm Buttonhead Hex Machine Screws (6)
These are the Traxxas 3x10mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used across many of the Traxxas vehicles.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Rally1/10 Summit1/16 E-Revo Brushed1/16 E-Revo VXL...$250 -
TRA2552
Traxxas Hex Drive Screws, 3x12mm (6): Revo, Slayer
This is a package of six 3x12mm Traxxas Countersunk Hex Head Screws. Features:Steel constructionBlack in colorUsed on the Traxxas Revo monster truck, can also be used in any application where a 3x12mm countersunk screw is required Includes: Six 3x12mm...$250 -
TRA5347
Traxxas Large Rod Ends w/Hollow Balls (12): Revo
This is a package of Traxxas Large Rod Ends and Hollow Balls for the Revo 2.5 and 3.3 trucks. There are 12 rod ends and hollow balls per package. FEATURES:Plastic constructionBlack in colorMetal Pivot Balls INCLUDES:12 Rod Ends12...$9 -
GPM-ER2031-G
GPM Green Aluminum Rear Body Post Mount for E-Revo 2.0, Revo 3.3, Slayer, Summit
This is the GPM Racing Green Aluminum Rear Body Post Mount Set for Traxxas 1/10 E-Revo 2.0, E-Revo Brushed & Brushless, Revo 3.3, Slayer, and Summit trucks. Made of 6061-T6 aluminum, this mount is super tough and looks stunning with its anodized...$2999 -
TRA2580
Traxxas 3x20mm Buttonhead Hex Machine Screws (6)
These are the Traxxas 3x20mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used in many different Traxxas vehicles.Replacement part forBandit VXLDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0Ford F-150...$250 -
TRA5120
Traxxas Ball Bearings, 12x18x4mm (2)
These are Traxxas Wheel Hub Ball Bearings for the Revo, T-Maxx 3.3, E-Maxx, and other vehicles. Pair of 12x18x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction...$8 -
TRA4579X
Traxxas EZ-Start 1 & 2 Wiring Harness
This is the Traxxas Updated Wire Harness for the EZ Start and EZ Start 2 Systems. This harness has the white connector that the EZ Start pack plugs into. Features: Extra long 12" wires Pre-installed connectors and eyelets Includes:One wire harnessOne...$5 -
TRA5353
Traxxas Blue Anodized Wheel Nuts,17mm (4): Revo, T-Maxx 3.3, E-Maxx Brushless
This is a set of four Traxxas Blue Aluminum 17mm Splined Wheel Nuts for the vehicles using the 17mm wheel hubs. Some of the vehicles are the Revo 3.3, E-Revo Brushless, T-Maxx 3.3, E-Maxx Brushless, Slayer Pro, Summit, and more. FEATURES: Aluminum...$10