Nitro 4-Tec

This is a package of three Air Filter Foam Inserts for the Traxxas 2.5 engine. FEATURES:Constructed of foam and pre-oiled to trap dirt INCLUDES:Three Air FIlter Inserts for the Traxxas 2.5 engine REQUIRES:Installing in air filter boot on...

These are the Traxxas Big Bore Shock Upper and Lower Spring Retainers and 5 different thicknesses of spring pre-load spacers, from 1mm to 8mm. Replacement Big Bore Shock retainer set features upper and lower spring retainers (2), and spring pre-load...

These are Traxxas 3x30mm Button Head Screws (6). Features: Steel construction Black in color Button head design Includes: Six 3x30mm button head screws Specifications:Length: 1-3/16" (30mm)Diameter: 1/8" (3mm)

This is a Complete Control Box for the Easy Start 2 on the Traxxas Tmaxx. This houses the 7.2V battery for the Easy Start, and provides the start button. Also for the Tmaxx 3.3. FEATURES Black plastic construction Green motor and glow plug...

This is a pair of Traxxas 5x10x4mm ball bearings.  These are used in the clutch bells of many of the Traxxas vehicles. FeaturesThe bearings are constructed of stainless steel Includes2- Bearings Specs5x10x4mm

This is the Traxxas Curved Tip Heavy Duty Body Scissors for cutting and trimming polycarbonate RC bodies. To do a good job on a custom body, the right tools are a must. Having both a curved tip and straight tip (Traxxas part TRA3431) scissors in your...

This is the Traxxas Straight Tip Heavy Duty Body Scissors for cutting and trimming polycarbonate RC bodies. To do a good job on a custom body, the right tools are a must. Having both a straight tip and curved tip (Traxxas part TRA3432) scissors in your...

These are Shock Caps and Bottoms for Traxxas kits. Shock caps (2) and shock bottoms (2) for Traxxas Ultra Shocks Specifications:Diameter:Tops: 16mmBottoms: 13mm Replacement Part ForFord Fiesta ST RallyHoss 4X4 VXLNitro RustlerNitro SlashRustler 4X4...

This is the Traxxas Standard Size Body Clips (12) - Standard-duty body clips   Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 SummitBandit VXLBanditBIGFOOTJatoNitro RustlerRevoRustler VXLRustlerSlayer Pro 4X4Stampede...

These are Traxxas 4mm Stainless Locking Nuts. These will fit many different Traxxas vehicles, and are a great item to keep in your toolbox.Features:Stainless steel construction.Nylon insert.Includes:Six Lock NutsSpecifications:Size: 4mm

This is the Traxxas Servo Case for 2055 servo. This is Traxxas part number 2052.

This is a package of six 3x10mm Traxxas Countersunk Hex Head Screws. FEATURES Steel construction, Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a 3x10mm countersunk screw is...

This is the Cooling Head Protector for the Traxxas TRX 3.3 Racing Engine, TRA5407. FEATURES:Constructed of plastic, black in color INCLUDES:Cooling Head Protector and five 3x6mm screws REQUIRES:Fastening to top of cooling head SPECS:Thickness: 0.18" (4...

This is the Digital High Torque Traxxas Servo. FEATURES:Ball bearingsBlack plastic construction INCLUDES:One digital high torque ball bearing servo SPECS:Ratings such as speed and torque have not been provided by Traxxas.Length: 2.16" (55mm)Width: .78"...

This is the Traxxas 5x11x4mm Ball Bearing Set.  This includes eight ball bearings.  These are used in many of the Traxxas vehicles. FeaturesMade of Stainless steelShielded on both sides (not rubber sealed) Includes8 ball bearings Specs5mm...

This is a set of Traxxas TRX 3.3 Cooling Head Gaskets measuring 0.20, 0.30, and 0.40mm. The stock size is 0.30mm. These will give you the ability to tune your engine for optimal performance under your conditions.Fits TRX 3.3 engines in:Nitro 4-TecNitro...

This is the Traxxas Aluminum Handled Body Post Hole Reamer with Cap for Lexan RC bodies.  With a crisp steel cutting edge and included aluminum cap for protection, this is not your average body reamer.  The tip features both metric (mm) and...

This is the Traxxas Black Antenna Tube with Cap and Wire Retainer.  These are compatible with nearly all Traxxas cars, trucks and boats.  The sleek black design looks great as well.

This is the Traxxas EZ-Start 1 Quick Connector Stock Replacement Wiring Harness. Features: All wires included in an EZ starting system Includes:One complete wire set with connectorsTwo zip tiesOne adhesive foam pad Requires: The remainder of the EZ...

This is the optional Blue Traxxas Resonator Dyno-Tuned Performance Pipe for the Traxxas Jato, Nitro Rustler and Nitro 4-Tec with TRX Racing Engines. FEATURES:The Traxxas Resonator aluminum tuned pipe is specifically engineered to fit right in the...

This is Traxxas Rod Ends Short Hollow Balls Set of six short rod ends with hollow ball connectors Replacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBIGFOOT No. 1 Officially Licensed ReplicaChevrolet Corvette StingrayDrag...

This is replacement Traxxas Fuel Tank Pull Ring, Cap, and Shutoff Clamp for the Revo 2.5 and 3.3 trucks.   Fuel tank cap Kit with pull ring, tank cap, and engine shut-off clamp

This is the Traxxas Complete Stock Replacement Carburetor for the Traxxas TRX 2.5 and TRX 3.3 Engines.  A damaged carburetor will severely decrease the power of your engine.  This can restore the lost power.  The...

This is the EZ Start 2(R) Starting System from Traxxas. This is the updated replacement for the first-generation EZ Start 2 System. It features a higher torque motor for the new 3.3 race series engines. FEATURES:Simple push-button starting for glow plug...

This is the Traxxas TRX 3.3 Engine Piston and Sleeve for the Traxxas TRX 3.3 engines.  This fits the 3.3 engines used in the Traxxas Revo, T-Maxx, Jato, and Nitro 4-Tec vehicles.  A new pistion and sleeve can restore lost power from wear on...

These are the Traxxas Mounts for the RPM Telemetry Sensor for Nitro Engines. RPM sensor mounts allow you to mount an RPM sensor to your nitro engine. IncludesThree different plastic mountsTwo plastic spacersTwo flat washersTwo split washersTwo hex socket...

This is an optional Traxxas Large Knurled Flywheel for use with Starter Boxes. Features: Large knurles to be gripped by rubber starter wheels Two pin aluminum construction Vent holes drilled to keep clutch shoes cooler Includes: One 40mm...

This is the Traxxas replacement piston and sleeve for the TRX Pro .15 engines. Features: ABC (Aluminum piston with a Brass sleeve or liner that is Chrome plated) Matched set with oil ring Includes:1 Piston1 Sleeve (liner)

These are Traxxas 3x10mm Hex Screws (6). Features: Steel construction cap head with hexagon socket drive insert Metal lock washers Includes:(6) Screws(6) Lock Washers(1) Hex Wrench Specifications:Screws:Diameter: 3mmLength: 10mm Lock Washers:Inner...

This is the Traxxas Plastic Washers,Wht: ST, RU, BA(6)

This is a pair of Traxxas 5x10x4mm Blue Rubber-Sealed Ball Bearings. These are used on vehicles like the 1/10 E-Revo, Revo 3.3, T-Maxx, Slayer, as well as other vehicles.FeaturesMetal bearing constructionBlue rubber dirt shieldsIncludes: (2) 5X10mm ball...

This is the Traxxas Bellcrank Bushings (Plastic) set (5x8x2.5mm) (4) Includes: Set of four 5x8x2.5 mm bellcrank bushings

These are hardened steel drive yokes for the Traxxas Rustler and Stampede. FEATURES:Hardened steel construction and is stronger than stock parts.These yokes also come with U-Joints pre-installed for ease of installation. INCLUDES:Two hardened steel yokes...

This is a Package of Replacement Cush-Drive Elements for the EZ Start 2 System. FEATURES:Black plastic construction INCLUDES:Four cush-drive elements REQUIRES:The remainder of the EZ Start 2 system. SPECS:Length: 6mm (0.24")

This is a Traxxas TRX 2.5 and 2.5R Piston and Sleeve kit.  If you have several gallons of fuel through your engine, it may be time for a new piston and sleeve.  It is a direct replacement.  Included are one piston, one...

This is the Traxxas Nitro 4-Tec Pro Decal Sheet Sheet of pre-cut adhesive Nitro 4-Tec decals

This is a set of six Traxxas 4mm Grub / Set Screws with Threadlock. Set of six 4 mm set screws (grub screws) with threadlock Replacement Part ForE-Revo VXL BrushlessJatoNitro SlashRevoSlayer Pro 4X4SummitT-MaxxTRX 2.5RTRX 3.3

This is a set of four Traxxas 3x10mm Flat-Head Hex Drive Machine Screws. Set of four 3x10 mm flat-head machine screws with hex drive headsReplacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisChevrolet Corvette StingrayDrag SlashFactory Five...

This is a set of Traxxas Threaded Rods (20mm, 25mm, & 44mm), and a 12mm Set Screw.Includes20mm Threaded Rod25mm Threaded Rod44mm Threaded Rod12mm Set Screw Replacement Part ForBandit VXLBanditBIGFOOT No. 1 Officially Licensed ReplicaFord F-150 Raptor...

This is the Traxxas Rubber Exhaust pipe Rubber exhaust pipe for Nitro Rustler, Nitro Sport, and Nitro 4-Tec. (Side Exhaust Engines Only) Replacement Part ForTRX Pro .15Nitro Rustler Nitro Sport Nitro 4-Tec