1/16 Rally

These are the Traxxas Left and Right Axle Carriers for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles. Features: Nylon construction

These are Traxxas 4x8x3mm Sealed Ball Bearings (2). These are used in 1/16 vehicles such as the E-Revo and Slash, as well as many other Traxxas vehicles. Features:Blue rubber sealedMay also be used...

These are the Traxxas Front and Rear Toe Links for use on the 1/16 Slash and E-Revo vehicles. Features: Nylon construction

These are the Traxxas Pushrods for use on the 1/16 Slash VXL 4WD. Features: Nylon construction Red in color

These are Traxxas 2.5x8mm Cap Head Screws (6). Features: Steel construction Black in color

This is the Hot Racing 26-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:Standard 4140 steel and heat...

This is the Traxxas Blue Aluminum 1/16 Motor Plate When upgrading your 1/16 scale vehicle to Velineon brushless power, you will need to change the standard motor plate and mount. Use the 7090 motor...

This is the Hot Racing 28-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:Standard 4140 steel and heat...

This is the Traxxas Gear set, transmission (includes 18T, 25T input gears, 13T idler gear (steel), 35T output gear, M3x13.75 screw pin). Transmission gear set includes 18-T and 25-T input gears, 13-T...

This is the Traxxas Gear Cover with Motor Mount Hinge PostReplacement gear cover with motor mount hinge post and 3x10 mm screw with split and flat washers and 3x8 mm screwAccessory Part For1/16...

This is the Traxxas Rebuild kit, GTR composite shocks (x-rings, bladders, pistons, e-clips, shock rod ends, hollow balls) (renews 2 shocks). This is Traxxas part number 7062Part Number: 7062 /...

This is the Traxxas Finned Aluminum Motor Mount The finned aluminum motor mount connects to the 7090 aluminum motor plate to provide a solid mounting surface for the Velineon 380 brushless motor...

This is the Traxxas Hollow balls (20). This is Traxxas part number 7028Part Number: 7028 / TRA7028Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave...

This is the Traxxas Rebuild kit, center differential (includes o-rings and diff gear covers). This is Traxxas part number 7014XPart Number: 7014X / TRA7014XFits1/16 E-Revo Brushed1/16 E-Revo VXL...

This is the Traxxas VXL-3m Brushless Waterproof Electronic Speed Control (ESC). This is a stock replacement for Traxxas 1/16 scale brushless trucks, and it comes pre-wired with the Traxxas...

This is the Bold RC Adventure Trail Backpack Adventure Trail BackpackThe Adventure Trail Backpack is a versatile and lite weight RC transportation option. Featuring a durable shell material that...

This is the Pro-Line RC Track Bag with Tool Holder Show up to the races in Style with Pro-Line’s Track Bag! The bag features luggage quality zippers. The bag is supported by an inner corrugated...

This is the Rage RC Black Large Gear Bag The Rage R/C Large Gear Bag will fit a 1/8 buggy, drone, truck or boat; and will keep the model safe and your automobile interior clean after a day at the...

This is the Traxxas Racing Sponsors Decal Sheet Dress up your model’s body with the Traxxas Racing Sponsor Decal Sheet. The decal sheet includes over 25 different full-scale sponsors including, NOS,...

This is the Traxxas RC Car/Truck Carrier Backpack Features Thick, Weather-Resistant Nylon Fabric Heavy Duty Zippers and Stitching Large Zippered Front Pockets for Tools and Parts Four-Compartment...

This is the Traxxas Medium RC Car/Truck Duffle Bag Features Perfect for 1/10 and 1/8 Scale Models Thick, Weather-Resistant Nylon Fabric Heavy Duty Zippers and Stitching Large Outer Pockets for...

This is the Traxxas Shoulder Strap for the #9917 Duffle Bag Add additional carrying support with the strap for your RC Car/Truck Duffle Bag Features Heavy Duty Shoulder Strap for Fuffel Bag with...

This is the Traxxas Official Team Traxxas Racing Decal Set (Flag Logo/ 6-color) The official Team Traxxas Racing Decal sheet has been revised and now includes EZ-Start, Stinger Motors, ProGraphix,...

This is the Traxxas Blue Aluminum 12mm Wheel Hubs This set of four 12 mm blue-anodized hex wheel hubs fit with greater precision and look awesome on the axles. The hubs are machined from solid...

This is the Traxxas Rod ends (8)/ hollow balls (8) Set of eight rod ends with hollow balls Accessory Part For1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 Slash 4X41/16 SummitTRX-4M 1/18 1979...

These are the Traxxas 2.5x6mm Cap-Head Hex Machine Screws. These come in packages of six screws, and are used in a wide variety of Traxxas vehicles.Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16...

This is the Hot Racing Red Aluminum Shock Upgrade Kit for Traxxas 1/16 GTR Shocks. This includes aluminum shock caps, spring adjusters, and spring retainers. These will replace the plastic cap,...

This is the Hot Racing Hardened Steel Lightweight 53-Tooth Spur Gear for Traxxas 1/16 Vehicles like the 1/16 E-Revo, 1/16 Slash 4x4, 1/16 Summit, and 1/16 Rally.FEATURES:- CNC machined light weight...

This is the Hot Racing 30-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:CNC Machined light weight Precision...

This is the Hot Racing 29-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:Standard 4140 steel and heat...

This is the Traxxas Input shaft/ output shaft. This is Traxxas part number 7092Part Number: 7092 / TRA7092Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss...

This is the Traxxas Piston, damper (2x0.5mm hole, red) (4)/ travel limiters (4). This is Traxxas part number 7067Part Number: 7067 / TRA7067Fits1/16 E-Revo Brushed1/16 Ford Fiesta1/16 Ford Mustang...

This is the Traxxas Rebuild kit, steel constant-velocity driveshafts (includes pins, o-rings, stub axles for driveshafts assemblies). This is Traxxas part number 7055Part Number: 7055 /...

This is the Traxxas Steel Constant Velocity Driveshaft Set for the 1/16 Slash 4x4 and 1/16 Rally VXL vehicles.  This includes all four driveshafts and axles.Traxxas Steel Constant Velocity...

This is the Traxxas Aluminum caps, pivot ball (threaded aluminum, hard-anodized with PTFE-coating) (8)/ hex wrench, 5mm. This is Traxxas part number 7033XPart Number: 7033X / TRA7033XFits1/16 E-Revo...

This is the Traxxas Seal kit, receiver box (includes o-ring, seals, and silicone grease). This is Traxxas part number 7025Part Number: 7025 / TRA7025Fits1/16 E-Revo Brushed1/16 E-Revo VXL...

This is the Traxxas Box, receiver (sealed)/ wire cover/ foam pads, upper & lower/ silicone grease/ 2.5x8 CS (4)/ 3x4 GS (1). This is Traxxas part number 7024XPart Number: 7024X / TRA7024XFits1/16...

This is a set of Traxxas 2.5x12mm Countersunk Hex Head Machine Screws (6 pack). These are used in many of the 1/16 scale Traxxas vehicles.SpecificationsLength: 12mmWidth: 2.5mmFits1/16 E-Revo...

This is set of Traxxas 2.5x10mm Countersunk Machine Screws with Hex Heads (6 pack). These are used in many of the Traxxas 1/16 scale vehicles.SpecificationsLength: 10mmDiameter: 2.5mmFits:1/16...

This is the Traxxas Servo Case and Gasket Set for 2080 Micro Waterproof Servos.The 2080 servo has been used in vehicle such as:1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford...