1/16 Rally

These are the Traxxas 3x10mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used across many of the Traxxas vehicles.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10...

This is a 26 Tooth, 48 Pitch Pinion Gear with Set Screw from Traxxas. FEATURES:Steel construction, silver in color

This is the 18-T Pinion (48-pitch) Gear with Set Screw 18-Tooth Pinion Gear (48-Pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your...

This is the Hot Racing Aluminum Hard Anodized Red GTR Shock Bodies for Traxxas 1/16th scale vehicles, including the 1/16 E-Revo, 1/16 Slash 4X4, 1/16 Summit, 1/16 Rally, 1/16 Ford Fiesta, 1/16 Grave...

This is the Traxxas Caps and spring retainers, GTR shock (upper cap (2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2)). This is Traxxas part number 7065Part Number: 7065...

This is the Traxxas Hollow balls, steel (machined).Increase precision and extend wear with this set of twenty fully machined steel hollow balls for 1/16 models. The steel hollow balls are direct...

This is the Rear Bulkhead for use on the Traxxas 1/16 E-Revo and Slash Vehicles. FEATURESNylon construction, black in color

This is the Hot Racing Black Aluminum Rear Body Mount Post Set for Traxxas 1/16 E-Revo, Slash, and Rally vehicles. This will fit brushed and VXL brushless models of these cars.FEATURES:CNC machined...

This is the Hot Racing Black Aluminum Rear Shock Mount for Traxxas 1/16 E-Revo, Slash, Rally, and Summit vehicles. This will work on 1/16 brushed and VXL brushless trucks.FEATURES:CNC machined of...

This is the Traxxas Rocker arm post, steel (4). This is Traxxas part number 7155Part Number: 7155 / TRA7155Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss...

This is the 45T Spur Gear for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.FeaturesNylon constructionBlack in colorSpecificationsOuter Diameter: 24.75mm (0.97")Inner Diameter: 5.5mm (0...

These are the BellCrank Bushings for the Traxxas Nitro Jato Stadium Truck. FEATURES:Nylon constructionWhite in color

This is the Hot Racing Aluminum Rear Multi-Mount Rocker Arms for Traxxas 1/16 E-Revo, Slash, Rally, and Summit vehicles. Now you do not need to change the rocker arm to change progressive rate. Just...

This is the Battery Compartment Door and Vents for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.FeaturesNylon constructionBlack in colorIncludesOne battery compartment doorTwo vents

This is the Traxxas Standard Size Body Clips (12) - Standard-duty body clips   Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 SummitBandit VXLBanditBIGFOOTJatoNitro...

This is the Traxxas 1/16 Blue Aluminum Front and Rear Bulkhead Tie Bars with a 2.5x6 Capscrew.Stock Replacement On1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss...

This is the Traxxas Rocker arm set, progressive-2/ plastic bushings (8).Rocker arm set, progressive-2/ 4x7x2.5mm PB (8)Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford...

This is the Traxxas Short Temperature and Voltage SensorThe temperature/voltage sensor plugs directly into your TQi receiver and power tap to provide real-time motor temperature and battery voltage...

This is the Traxxas Complete Differential Assembly for the 1/16 scale E-Revo, Summit, Slash, Rally, and other Traxxas 1/16 vehicles.Includes: One complete differential assembly

This is the 19-Tooth Pinion Gear (48-Pitch) 3 mm Bore 19-tooth pinion gear (48-pitch) fits 3 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your...

This is a set of two (2) Traxxas 4mm x 7mm x 2.5mm Blue Rubber Shielded Ball Bearings.  These are factory replacements.  These fit several Traxxas models. Upgrade your standard plastic bellcrank...

This is the Traxxas Rear Suspension Arm Set for use on the 1/16 Slash Rear suspension arm set includes upper right & left and lower right & left suspension arms Features: Nylon constructionBlack in...

This is the Traxxas Black Antenna Tube with Cap and Wire Retainer.  These are compatible with nearly all Traxxas cars, trucks and boats.  The sleek black design looks great as well.

These are the Traxxas 1/16 Red Aluminum Toe Links (4) (Assembled with rod ends and threaded inserts).Accessory Part For1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Rally VXL1/16 Slash 4x4

These are the Traxxas 1/16 Red Aluminum Push Rods (4) (Assembled with rod ends).Accessory Part For1/16 Slash 4x4

This is the Hot Racing Black Aluminum Front Bulkhead for Traxxas 1/16 E-Revo, Summit, Slash, and Rally. This will fit the brushed and VXL brushless versions of these vehicles. This is a direct...

This is the Hot Racing 31-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:CNC Machined light weight Precision...

This is the Traxxas Gear set, differential (output gears (2)/ spider gears (3))/ differential output shafts (2)/ 1.5x6mm pin (3)/ 1.5x8mm pin (2). This is Traxxas part number 7082Part Number: 7082 /...

This is the Traxxas Velineon 380 Brushless Motor Rebuild Kit for the 1/16 brushless system. It includes two 4x9x4mm ball bearings, two 2x6mm screws with threadlock, and two front shims.Includes:Two...

This is the Hot Racing Aluminum Hard Anodized Black GTR Shock Bodies for Traxxas 1/16th scale vehicles, including the 1/16 E-Revo, 1/16 Slash 4X4, 1/16 Summit, 1/16 Rally, 1/16 Ford Fiesta, 1/16...

These are the Traxxas 1/16 Green Front/Rear Toe Links (4) & Hollow Balls (8).Accessory Part For1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Rally VXL1/16 Slash 4x4

This is the Hot Racing 32-Tooth 48-Pitch Hardened Steel 1/8 Bore Pinion Gear. This will fit many different vehicles. A few of them are listed below.FEATURES:CNC Machined light weight Precision...

This is full set of four Traxxas 1/16 GTR Hard-Anodized Aluminum Adjustable Shocks with TiN Shafts and PTFE-coated Bodies.  Shock oil is included.  These are the ultimate shock upgrade for 1/16...

This is the Chassis for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.FeaturesNylon constructionGrey in colorSpecificationsLength: 245mm (9.6")Width: 107mm (4.2")Height: 40mm (1.6")

These are Traxxas 3x10mm Hex Screws (6). Features: Steel construction cap head with hexagon socket drive insert Metal lock

This is the Hot Racing Red Aluminum Steering Arm Post for Traxxas 1/16 E-Revo, Slash, Summit, and Rally vehicles. This will fit brushed and VXL brushless versions of these 1/16 cars and trucks. ...

This is the Traxxas Telemetry Trigger Magnet for the Traxxas TQi Telemetry System. Replacement 5x2 mm telemetry trigger magnet.IncludesOne Telemetry Trigger Magnet for the Traxxas TQi Telemetry...

These are the Differential and Transmission Yokes for use on the Traxxas 1/16 E-Revo, Slash, and Summit vehicles.FEATURES

This is the Traxxas Spur gear, 55-tooth. This is Traxxas part number 7047R55-tooth spur gear (48-pitch) with telemetry magnet holder. Traxxas spur gears let you fine-tune the performance of your...

This is the Traxxas Bellcrank Bushings (Plastic) set (5x8x2.5mm) (4) Includes: Set of four 5x8x2.5 mm bellcrank bushings