Traxxas

These are the Traxxas TRX-4 Crawler Left and Right Mirrors, Snorkel and Mounting Hardware.FitsTRX-4

These are the Traxxas Standard Size Black Body Clips (12). Each pack includes 12 clips.Stock Replacement For4-Tec 2.0TRX-4

This is a pair of Traxxas Paddle Tires on Geode Chrome Wheels with a 17mm Splined Hex for 1/10 Revo, E-Revo, E-Maxx, T-Maxx, and Summit trucks. These are a must-have for running in mud, snow, or...

This is the Traxxas Cover, gear/ wire retainer. Gear cover with motor wire retainer Replacement part forFord Fiesta ST RallyHoss 4X4 VXLRustler 4X4 VXLRustler 4X4Slash 4X4 Ultimate

This is the Traxxas Tires, Talon / foam inserts (2). This is Traxxas part number 7170Part Number: 7170 / TRA7170Fits1/16 E-Revo Brushed1/16 E-Revo VXL BrushlessMore detail coming soon! Please check...

These are the Traxxas Tires & wheels, assembled, glued (SCT chrome, red beadlock style wheels, BFGoodrich Mud-Terrain T/A KM2 tires, foam inserts) (2)(4WD front/rear, 2WD rear only). This is Traxxas...

This is a pair of Traxxas Replacement Wheelie Bar Rubber Tires for the Traxxas aluminum aftermarket wheel sets (part 5186 & 5186A) used on many vehicles.Includes: Two Rubber Tires for the Wheelie...

These are the Traxxas 3x23mm Buttonhead Hex Machine Screws. Each package includes six screws.Replacement part forBandit VXLDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0Ford F-150...

This is the Traxxas Prographix Body with Decal Sheet for the Stampede 4x4 VXL trucks. The main graphics are pre-printed and the body is trimmed. It only needs a final paint color application to be...

This is the Traxxas Outer Driveshaft Assembly for the 1/16 Summit trucks.  This has the axle included.INCLUDES:One Outer Shaft assemblyOne Drive Pin

This is the Traxxas Inner Driveshaft Assembly for the 1/16 Summit trucks.  This is the portion that connects to the diff.INCLUDES:One Inner Shaft assemblyOne M2x8 Screw Pin

This is the Battery Compartment Door and Vents for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.FeaturesNylon constructionBlack in colorIncludesOne battery compartment doorTwo vents

These are the Traxxas 90-Degree Body Clips. These are a smaller size, typically used to hold down receiver covers, battery hold-downs, bodies on smaller trucks, etc.FeaturesMetal ConstructionSilver...

These are Shock Caps and Bottoms for Traxxas kits. Shock caps (2) and shock bottoms (2) for Traxxas Ultra Shocks Specifications:Diameter:Tops: 16mmBottoms: 13mm Replacement Part ForFord Fiesta ST...

This is the Front Differential Housing FEATURES Hardened plastic construction Black in color INCLUDESTwo front differential housing halves REQUIRESInstallation around assembled differential...

This is the Gray Nylon Chassis for the Traxxas Slash. FEATURES Gray composite nylon construction INCLUDESOne chassis for the Traxxas Slash REQUIRESInstalling all components onto the...

This is the Traxxas Standard Size Body Clips (12) - Standard-duty body clips   Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 SummitBandit VXLBanditBIGFOOTJatoNitro...

This is the Traxxas replacement Body Washers. FEATURES Nylon construction Helps prevent the body mount hole from cracking prematurely White in color SPECSOuter Diameter: 0.87" (22mm)Inner...

This is a package of 5mm Flanged Nylon Locking Nuts from Traxxas. FEATURES:Constructed of steel with serrated flange area for sure gripNylon insert INCLUDES:Eight 5mm Flanged Nylon Locking...

This is the Traxxas Sway Bar Kit for the Revo 2.5, 3.3, E-Revo, and E-Revo Brushless trucks. The Traxxas Revo sway bar kit is a must have for Revo racers everywhere. The kit was created,...

This is a set of Traxxas Jato 2.5 and 3.3 Front and Rear Aluminum Suspension Tie Bars.

This is a Traxxas Jato 2.5 and 3.3 Left and Right Half Shaft Set.  These come completely assembled and have rubber sealed boots.  These are used on the rear of the truck and attach to...

This is a Traxxas Jato 2.5 and 3.3 Stock Replacement Rear Shock Tower.

This is a package of Traxxas Large Rod Ends for the Rear Toe Link for the Revo 2.5 and 3.3.  These can be broken easily if you run your truck on anything but smooth ground. ...

This is an O-Ring and Seal Set for the TRX 2.5 Engine. FEATURES Complete seal and ring set. Black, blue and red rubber construction. Brass ring installation tools. INCLUDESTwo brass ring...

This is a Traxxas 20-Tooth Clutch Bell for the Traxxas T-Maxx .15, 2.5, 2.5R, 3.3, Revo, Jato, Nitro Rustler, and Nitro Stampede, Nitro 4-Tec.  The higher the number of teeth on your...

These are Traxxas Body Clips for the Traxxas Vehicles.  It is always good to have extra body clips around to keep your body securely fastened.  These fit all of the .15, 2.5, and 3.3...

This is the Traxxas Complete (Front & Rear) Suspension Link Set Extended suspension link set for TRX-4M High Trail Edition trucks. Links come assembled with hollow balls. IncludesSteering...

This is the Traxxas Blue Aluminum Motor Plate Replacement blue aluminum motor plate Replacement Part ForFord F-150 Raptor R 4X4Hoss 4X4 VXLSlash 4X4 VXLSlash 4X4Stampede 4X4 VXLStampede 4X4

This is the Traxxas Motor Plate 6061-T6 Aluminum (Red-Anodized) Machined from solid 6061-T6 aluminum, this motor plate offers rock-solid mounting security for major horsepower applications. Brilliant...

These are the Traxxas Rustler 4x4 Black 2.8" Wheels (2). These feature a standard 12mm hex, making them compatible with many other Traxxas vehicles as well. Replacement Part ForRustler 4X4 Accessory...

This is a set of four Traxxas TRX-4 Red Anodized Aluminum GTS Shocks, Assembled without Springs, for use with the Traxxas #8140 TRX-4 Long Arm Lift Kits.Accessory Part ForTRX-4 Crawler KitTRX-4 Ford...

These are the Traxxas TRX-4 Sport Front and Rear Bumper Mounts. This set includes a standard front and rear bumper mount, as well as an offset rear bumper mount.Stock Replacement OnTRX-4 Sport

These are the Traxxas TRX-4 Rear Heavy Duty Chromoly Machined Axle Shafts with Portal Drive Input Gear. If you're looking to beef up your drivetrain, these are a must!Accessory Part ForTRX-4 Crawler...

This is the Traxxas Unlimited Desert Racer Rear Differential Output and Spider Gear Set. This diff gear set includes two output gears and four spider gears.Accessory Part ForUnlimited Desert Racer...

This is the Traxxas Unlimited Desert Racer 47-Tooth Center Differential Spur Gear.Accessory Part ForUnlimited Desert Racer (UDR)

These are the Traxxas Unlimited Desert Racer Desert Racer Wheels (2).Stock Replacement OnUnlimited Desert Racer (UDR)

This is the Traxxas TRX-4 Stainless Steel Screw and Hardware Kit. With a full set of stainless hardware, working on your TRX-4 just got that much easier! Give your TRX-4 a complete upgrade with this...

This is the Traxxas 1/16 Blue Aluminum Front and Rear Bulkhead Tie Bars with a 2.5x6 Capscrew.Stock Replacement On1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss...

This is the Traxxas 4-Tec 2.0 Rear Chassis Brace Gear Cover and Wire Retainer. This is used on both the Ford GT and Mustang GT versions.Fits4-Tec 2.0