Radio/Electronic Accesories

This is a replacement antenna tube. Antenna tubes are used to help secure and protect reciever antenna wires. INCLUDES:1 blue antenna tube and 1 black antenna tube cap. SPECIFICATIONS:Length: 11"Outside Diameter: 1/8"

This is the Traxxas Link Bluetooth Wireless Module for use with TQi radio systems having the a TQi logo with the blue letter "i" on the face. The wireless module works with Android (v4.4 OS and higher), iPhone (4S and newer), iPod touch (5th generation...

This is the Traxxas Phone Mount for Traxxas TQi and Aton Transmitters. The Transmitter Phone Mount provides a secure mounting base for your mobile device when using it for the Traxxas app.

This is a Traxxas Large Servo Saver for Futaba, Hitec, Airtronics, and Traxxas servos. This will work on most vehicles requiring a large servo saver. The servo saver protects your steering servo by absorbing shocks that might otherwise cause internal...

This is the Long Temperature and Voltage Sensor for the Traxxas TQi system. To read voltage on electric vehicles, this must be used with the Traxxas part TRA6541 Power Tap. The temperature/voltage sensor plugs directly into your TQi receiver and power...

This is the Traxxas High-Voltage BEC and Receiver Box Set for use with the TRX-4 scale and trail crawler trucks. This BEC provides the power necessary to run high-voltage servos in the TRX-4. Traxxas recommends the High-Output BEC, or battery eliminator...

This is the Traxxas 4-Cell AA Battery Holder with On/Off Switch for use to power the receiver and servos in nitro vehicles.FitsNitro 4-TecNitro RustlerNitro SlashNitro SportNitro StampedeS-MaxxSportmaxxT-Maxx 2.5T-Maxx 2.5RT-Maxx 3.3

This is the Traxxas Temperature Sensor Mount for Electric Motors when using the TQi Telemetry System. Includes: Mount, Plastic Tie, and Thermal Pad The temperature sensor mount secures the temperature sensor to your electric motor with a thermal pad and...

This is the Short RPM Sensor for Traxxas models. FeaturesThe RPM sensor plugs directly into your TQi receiver to provide real-time speed and RPM data while you drive. Real-time telemetry requires a telemetry magnet, TQi radio with Traxxas...

This is the Traxxas Auto-Detectable Smart Temperature Sensor. This plug-and-play sensor is designed for use with the Traxxas 6550 Telemetry Expander. The auto-detectable temperature sensor plugs into the optional TQi Telemetry Expander to provide...

This is a set of Traxxas LiPo Battery Charge Indicator Plug Set. The set includes four Green, four Blue, and four Grey indicator plugs. Use these plugs to know which batteries are fully charged, discharged, or in storage charge, and to protect the...

This is the Traxxas 4 AA Battery Holder for Receivers in Nitro vehicles like the Jato, Nitro Rustler, T-Maxx, and others. Jato 4 AA battery holder with Futaba-style connector. No On/Off switch.Includes: One 4 cell AA Battery Holder w/Receiver Connector...

This is the Long RPM Sensor from Traxxas. The RPM sensor plugs directly into your TQi receiver to provide real-time speed and RPM data while you drive. Real-time telemetry requires a telemetry magnet, TQi radio with Traxxas Link Wireless...

This is the Traxxas Servo Y-Connector for use with Dual-Servo Steering Setups when there is only one steering channel on the receiver. The Y-adapter allows you to connect two servos to a single receiver port for trucks with dual-servo steering...

These are the Traxxas Telemetry Trigger Magnet Holders for the TQi radio system. The telemetry trigger magnet holders secures the trigger magnet to the spur gear to provide real-time RPM and speed data when combined with an RPM sensor, TQi radio with...

This is the Traxxas iD LiPo Battery Balance Adapter for Cell Voltage Checkers. This works with 2S, 3S, and 4S ID LiPo batteries to connect them to cell voltage checkers for individual cell reading. Warning: These are not intended for charging. The...

This is the Traxxas LiPo cell voltage checker and balancer with the #2938X adapter for use with Traxxas iD batteries. This can be used to check cell voltages on 2S, 3S, and 4S Traxxas ID LiPo batteries, and also to equalize the battery pack cells if...

This is the Wire Retainer/Gear Cover for use with many Traxxas vehicles using the TQi telemetry system, including the Bandit, E-Maxx, Rustler, Slash 2WD, Stampede 2WD, Stampede 4x4, and X-Maxx.FeaturesPlastic constructionBlack in colorIncludesWire...

This is the Traxxas High-Voltage Power Amplifier for the Traxxas Unlimited Desert Racer trucks. This is used to supply power to the accessory LED light kit for the UDR. Replacement high-voltage power amplifier for the 7885, 8485, and 8990 LED light...

This is the Traxxas Sensor, temperature and voltage (short). This is Traxxas part number 6523Part Number: 6523 / TRA6523Fits1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave Digger1/16 Kyle Busch Truck1/16...

This is the Traxxas Black Antenna Tube with Cap and Wire Retainer.  These are compatible with nearly all Traxxas cars, trucks and boats.  The sleek black design looks great as well.

This is the Traxxas Auto-Detectable Smart Voltage Sensor.  The auto-detectable voltage sensor plugs into the optional TQi Telemetry Expander to provide real-time voltage data while you drive. Real-time telemetry requires a TQi radio with Traxxas...

These are the Traxxas Mounts for the RPM Telemetry Sensor for Nitro Engines. RPM sensor mounts allow you to mount an RPM sensor to your nitro engine. IncludesThree different plastic mountsTwo plastic spacersTwo flat washersTwo split washersTwo hex socket...

This is the Traxxas LED Light Y-Harness for the Summit 1/10 truck, allowing power to get to the servos and LED lights.  This works on the Summit trucks with the TQ 2.4GHz radios system.

This is the Traxxas Telemetry Trigger Magnet for the Traxxas TQi Telemetry System. Replacement 5x2 mm telemetry trigger magnet.IncludesOne Telemetry Trigger Magnet for the Traxxas TQi Telemetry SystemSpecifications5mm x 2mm round magnet Replacement Part...

This is the Traxxas X-Maxx and XRT Temperature and Voltage Sensor.Accesory Part For X-Maxx XRT

This is the Temperature and Voltage Sensor for the XO-1 On-Road Car from TraxxasFeaturesFunctions with the Traxxas TQi Link system to display battery voltage and temperature.IncludesTemperature and Voltage Sensor with Zip Tie.

This is the Traxxas LiPo cell voltage checker/balancer. This voltage checker and balancer requires the #2938X adapter if you are using it with Traxxas iD batteries.Use the LiPo battery checker to view individual LiPo cell voltages and overall...

This is the Traxxas Telemetry Expander Data Link Wire, used to connect the #6550X Telemetry Expander 2.0 to the #3485 VXL-6s or #3496 VXL-8s electronic speed control. Use this data link cable to connect the 6550X telemetry expander 2.0 to the VXL-4s,...

This is the Traxxas Telemetry Expander Data Link Wire, used to connect the #6550X Telemetry Expander 2.0 to the #6590 high-voltage power amplifier in the Traxxas Unlimited Desert Racer. Accessory Part ForUnlimited Desert Racer (UDR)

This is the Traxxas Telemetry Expander and GPS Module 2.0 Combo Set.  Upgrade your Traxxas vehicle with this set for precision telemetry data with easy setup. This set must be used with Traxxas TQi radio systems and the #6533 TSM receiver. Expanded...

This is the Traxxas Telemetry GPS Module 2.0.  For real-time, ultra-precise speed data, the GPS Module 2.0 is the answer. Real-Time SpeedStandard telemetry sensors use your vehicle’s gear ratio and tire size to calculate speed based on RPM...

This is the Traxxas Telemetry Expander 2.0.  Compatible with TQi transmitters and vehicles equipped with a 6533 TSM receiver, the Telemetry Expander 2.0 is a the best option for advanced data communication. Expanded InnovationTraxxas telemetry...

This is the Traxxas BEC Y-Harness.  This is allows for the use of a BEC, while still running accessory items like LED lights off the ESC auxiliary power wire. The Y-harness has two female JST connectors and one male JST connector. Accessory Part...

This is the Traxxas Complete High-Output BEC Assembly. A BEC helps provide more power to prevent receiver "brown-outs" when using more demanding servos. Accessory part forToyota GR Supra GT44-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit...

This is the Traxxas Telemetry trigger magnet holder, center differential/ magnet, 5x2mm (1)/ 3x8mm BCS (3). This is Traxxas part number 6539Part Number: 6539 / TRA6539Fits1/10 RallySlash 4x4 (low-CG)Slash 4x4 (standard chassis)Slash 4x4 PlatinumSlash...

This is a set of Traxxas Jato 2.5 and 3.3 Servo Horns for JR, Hitec, Airtronics, KO, and Sanwa Servos.  This allows you to use servos other than the stock Traxxas servos in your Jato.