This is the Pro-Line Secure-Loc Replacement Thumbwasher Kit for Pro-Line Body Mount Kits. This fits Pro-Line Body Mount Kit part numbers #6070-00, #6071-00, #6087-00, #6304-00, #6305-00, #6306-00, #6307-00.This kit includes four new caps, 4x12mm...

These are the RPM Red Front Upper & Lower Suspension A-Arms for Traxxas 1/16 E-Revo and 1/16 Grave Digger trucks.Upon the release of the Traxxas 1/16th Scale Mini E-Revo, RPM immediately started receiving requests for durability upgrades. What better...

These are the RPM Green Rear Upper and Lower Suspension A-Arms for the Traxxas 1/16 E-Revo and 1/16 Grave Digger vehicles.Similar to RPM front A-arms (#80694), our rear arms eliminate nearly all of the A-arm slop typically found in stock Mini E-Revo rear...

This is the RPM Black Rear Bumper for Traxxas 1/16 E-Revo. This fits the brushed and VXL brushless versions.At just over 2' wide, stock 1/16th scale Traxxas Mini E-Revo bumpers just aren't large enough to provide any protection to these cool little...

This is the RPM Chrome Mock Intake and Supercharger Blower Set, designed to fit most 1/8 and 1/10 scale bodies. Are you into scale realism on your favorite R/C rides? Perhaps you just dropped some brushless / LiPo power in your ride and want to show off...

This is the Pro-Line Front and Rear Extended Body Mount Kit for the Traxxas Slash 4x4.  Pro-Line continues to innovate with more must-have accessories for your Short Course Truck.  The all-new Pro-Line body mount kit includes adjustable body...

This is the Pro-Line Front and Rear Extended Body Mount Kit for the Traxxas Slash 2WD & Stampede 2WD trucks. Pro-Line continues to innovate with more must-have accessories for your truck. The all-new Pro-Line body mount kit includes adjustable body...

This is the Traxxas Outer Driveshaft Assembly for the 1/16 Summit trucks.  This has the axle included.INCLUDES:One Outer Shaft assemblyOne Drive Pin

This is the Traxxas Inner Driveshaft Assembly for the 1/16 Summit trucks.  This is the portion that connects to the diff.INCLUDES:One Inner Shaft assemblyOne M2x8 Screw Pin

This is the Battery Compartment Door and Vents for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles.FeaturesNylon constructionBlack in colorIncludesOne battery compartment doorTwo vents

These are the Traxxas 90-Degree Body Clips. These are a smaller size, typically used to hold down receiver covers, battery hold-downs, bodies on smaller trucks, etc.FeaturesMetal ConstructionSilver in ColorBent for Easy RemovalIncludesTen Bent Silver...

This is a set of Deans Ultra Wire 12 Gauge Red/Black wires (2 feet). This is a High Grade, 12 Guage Wire used in R/C products to Carry High Current. Features: 12 guage wire has less voltage drop, due to less resistance Very flexible silicone sheath to...

These are Shock Caps and Bottoms for Traxxas kits. Shock caps (2) and shock bottoms (2) for Traxxas Ultra Shocks Specifications:Diameter:Tops: 16mmBottoms: 13mm Replacement Part ForFord Fiesta ST RallyHoss 4X4 VXLNitro RustlerNitro SlashRustler 4X4...

This is the Front Differential Housing FEATURES Hardened plastic construction Black in color INCLUDESTwo front differential housing halves REQUIRESInstallation around assembled differential components

This is the Gray Nylon Chassis for the Traxxas Slash. FEATURES Gray composite nylon construction INCLUDESOne chassis for the Traxxas Slash REQUIRESInstalling all components onto the chassis SPECSLength: 338mm (13.3")Width: 189mm (7.44")Height: 23mm (0...

This is the Traxxas Standard Size Body Clips (12) - Standard-duty body clips   Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 SummitBandit VXLBanditBIGFOOTJatoNitro RustlerRevoRustler VXLRustlerSlayer Pro 4X4Stampede...

This is the Traxxas replacement Body Washers. FEATURES Nylon construction Helps prevent the body mount hole from cracking prematurely White in color SPECSOuter Diameter: 0.87" (22mm)Inner Diameter: 0.26" (6.7mm) INCLUDESEight large body mount washers

This is a package of 5mm Flanged Nylon Locking Nuts from Traxxas. FEATURES:Constructed of steel with serrated flange area for sure gripNylon insert INCLUDES:Eight 5mm Flanged Nylon Locking Nuts REQUIRES:8mm nut drivers SPECS:Hex Size: 8mmInner Diameter:...

This is the Traxxas Sway Bar Kit for the Revo 2.5, 3.3, E-Revo, and E-Revo Brushless trucks. The Traxxas Revo sway bar kit is a must have for Revo racers everywhere. The kit was created, developed, and extensively field tested by Traxxas driver and...

This is a set of Traxxas Jato 2.5 and 3.3 Front and Rear Aluminum Suspension Tie Bars.

This is a Traxxas Jato 2.5 and 3.3 Left and Right Half Shaft Set.  These come completely assembled and have rubber sealed boots.  These are used on the rear of the truck and attach to the diff output yokes.

This is a Traxxas Jato 2.5 and 3.3 Stock Replacement Rear Shock Tower.

This is the Team Integy Red Aluminum High-Flow Aluminum Air Filter for the Traxxas Revo 2.5 and 3.3 trucks.  This looks great, and gives your truck a whole new style. FEATURESHousing constructed of aluminum, red in colorTwo replaceble filter...

This is an Integy 2.5mm (motor screw) Replacement Tip for the Team Integy Ti-Nitride Hex Wrench Set.  This is an inexpensive way to get your tools back in perfect condition again. FEATURES Hex wrench tips have a high degree of tolerance...

This is a package of Traxxas Large Rod Ends for the Rear Toe Link for the Revo 2.5 and 3.3.  These can be broken easily if you run your truck on anything but smooth ground.  It is a good idea to have spares on hand.

This is an O-Ring and Seal Set for the TRX 2.5 Engine. FEATURES Complete seal and ring set. Black, blue and red rubber construction. Brass ring installation tools. INCLUDESTwo brass ring installation tools.One blue rubber carburetor level seal.Two...

This is a Traxxas 20-Tooth Clutch Bell for the Traxxas T-Maxx .15, 2.5, 2.5R, 3.3, Revo, Jato, Nitro Rustler, and Nitro Stampede, Nitro 4-Tec.  The higher the number of teeth on your clutch bell, the higher your top speed.  The lower...

These are Traxxas Body Clips for the Traxxas Vehicles.  It is always good to have extra body clips around to keep your body securely fastened.  These fit all of the .15, 2.5, and 3.3 versions of these trucks, as well as many other vehicles...

This is an RPM Black Front Right Suspension A-Arm Set for the Traxxas Revo 2.5 and 3.3 trucks.  This includes one front right upper and one front right lower arm.  Be sure to check out our other RPM arms to make a...

This is a Blue Aluminum Fuel Tank Guard for the Traxxas Revo 2.5 and 3.3.  If you are a serious Revo driver, you really need this part.  It helps protect from breaking your fuel tank, which can really stop your fun or take you out of...

This is the Dubro Body Reamer and Scissors Set.  If you are doing any cutting or fitting of a body, YOU NEED THESE TOOLS.  Without them, you can easily ruin that new body.  These make cutting lexan bodies very simple and easy. FEATURES:...

This is the Traxxas LED Light Set Complete with Power Supply. The TRX-4 Defender LED Light Kit takes scale realism to the next level with working headlights, tail lights, light bar and rock lights. Fully waterproof and built Traxxas-Tough, the LED light...

This is the GPM CNC 6061-T6 (Red) Alloy Shocks The shocks are CNC oriented alloy dampers designed to enhance chassis response. Bodies are 6061-T6 alloy for improved strength and heat resistance, and the internal chambers are filled with 1000cSt silicone...

This is the GPM CNC 6061-T6 (Orange) Alloy Shocks The shocks are CNC oriented alloy dampers designed to enhance chassis response. Bodies are 6061-T6 alloy for improved strength and heat resistance, and the internal chambers are filled with 1000cSt...

This is the GPM CNC 6061-T6 (Green) Alloy Shocks The shocks are CNC oriented alloy dampers designed to enhance chassis response. Bodies are 6061-T6 alloy for improved strength and heat resistance, and the internal chambers are filled with 1000cSt...

This is the GPM CNC 6061-T6 (Black) Alloy Shocks The shocks are CNC oriented alloy dampers designed to enhance chassis response. Bodies are 6061-T6 alloy for improved strength and heat resistance, and the internal chambers are filled with 1000cSt...

This is the GPM CNC 6061-T6 (Blue) Alloy Shocks The shocks are CNC oriented alloy dampers designed to enhance chassis response. Bodies are 6061-T6 alloy for improved strength and heat resistance, and the internal chambers are filled with 1000cSt silicone...

This is the Viper Scale Racing Yellow Viper Controller Holster Viper Controller HolsterProtect your investment and keep your setup clean with the Viper Controller Holster. Designed to securely mount to the side of your track table, this holster keeps...

This is the Viper Scale Racing Blue Viper Controller Holster Viper Controller HolsterProtect your investment and keep your setup clean with the Viper Controller Holster. Designed to securely mount to the side of your track table, this holster keeps your...

This is the Viper Scale Racing White Viper Controller Holster Viper Controller HolsterProtect your investment and keep your setup clean with the Viper Controller Holster. Designed to securely mount to the side of your track table, this holster keeps your...