This is the GPM Racing Green Steel and Aluminum Front CVD Driveshaft Set with 12mm Keyed Hexes for Traxxas 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, and 1/10 Rally VXL vehicles. These feature steel axles and CVD joints, with the main shaft made of...

These are the Traxxas electric Rustler & Stampede 2WD Rear Talon Extreme Tires Mounted on Black 2.8" Wheels with 12mm Hexes. These are set up for use on the REAR only. The tires come pre-glued to the wheels with foam inserts installed. Accessory Part...

This is a pair of RC4WD Rock Crusher X/T 1.9" Rock Crawler Tires with Foam Inserts. Made with X3 soft/sticky compound rubber, these are great for off-road use when additional traction is needed.FEATURES:Advanced X3 soft and sticky compoundSuper strong...

This is the Diff Oil Kit for the Revo by Traxxas. Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential by using higher or lower viscosity oil. Depending on the track conditions,...

These are the is the Traxxas Talon EXT Tires Mounted on Black Wheels with 17mm Splined Hexes. Each package includes two tires with foam inserts, pre-mounted on the wheels. All-terrain Talon EXT tires provide superior off-road traction and performance...

This is a pair of Traxxas Bandit Rear Turnbuckle Camber Links. These measure 56mm center to center, and come pre-assembled with rod ends and hollow balls. These are stock replacements for the Bandit VXL, but can also be used to upgrade the Bandit XL-5.

This is a pair of GPM Racing Black Aluminum Adjustable Shocks with 3 Complete Spring Sets for Traxxas 1/16 E-Revo, 1/16 Slash 4x4 and 1/16 Summit trucks. Made of 6061-T6 aluminum, these shocks feature threaded shock bodies to allow for fine tuning. ...

This is the Integy Silver Aluminum Evolution Suspension Conversion Kit for the Traxxas Rustler XL-5 and VXL trucks. Features: Aluminum construction Silver in color Includes: Shock towers-front and rear Four hex wheel hubs with...

This is the Traxxas Red Aluminum Turnbuckle set for the Rustler, Rustler VXL, Stampede 2WD, Stampede VXL, and Bigfoot trucks.FEATURES: Anodized aluminum construction Red in color Black nylon ball ends INCLUDES:Two 39mm front camber linksTwo 49mm back...

This is a Traxxas Revo 36-Tooth Spur Gear.  This will fit the Revo 2.5 and 3.3 trucks.  The lower the number of teeth on the spur gear, the higher top end speed you will have.  The higher the number of teeth, the more torque...

This is a pair of Pro-Line (Black) 1/6 Badlands MX57 Front/Rear 5.7” Tires Mounted on Raid 8x48 Removable 24mm Hex Wheels (2) The long-awaited successor to the almighty Badlands MX43 (PRO1013113) is finally here; meet Pro-Line's new and improved...

This is the Pro-Line Dumont Front/Rear 2.8" Sand/Snow MTD Mounted 12mm Raid Black Wheels. Features Extreme Paddle Tires for Sand and Snow Pro-Line P-L Logos Embedded into Tire Carcasss Incredible Performance and Style! Removable Hexes Allow you...

These are the RPM Traxxas Unlimited Desert Racer (UDR) Trailing Arm Skid Plates for use with RPM81282 Trailing Arms.RPM Trailing Arm Skid Plates protect RPM Trailing Arms (RPM #81282 - sold separately) from skid and impact damage and are extremely easy...

This is a set of two RC4WD Scale Diamond Plate Aluminum Sheets. These sheets measure 11 x 8.7 inches each, giving you plenty of material to create epic scale features on your truck. From tool boxes to rocker panel plates, diamond plate will make your...

This is the Tekno RC M6 Front Driveshaft, Steering Block, and Stub Axle set. The Tekno RC M6 Driveshafts and Steering Blocks will give your Slash 4×4, Stampede 4×4, Rustler 4×4, and Hoss the ultimate in performance and durability.For...

This is the Team Integy Blue Aluminum Evolution-5 Shock Tower for the Traxxas T-Maxx 2.5, 3.3, E-Maxx 16.8V, and E-Maxx Brushless Vehicles that have square body posts. FEATURES Aluminum construction Blue in color INCLUDESOne Shock...

This is a pair of GPM Racing Orange Aluminum Front/Rear Brake Calipers for Traxxas Unlimited Desert Racer trucks. These are made of 6061-T6 aluminum, then anodized for a realistic finish. These can be used on the front or rear of the truck (2 packs...

This is the Traxxas TRX-4 Metal Steering Servo Horn with 3x14 Buttonhead Capscrew. Add this steel servo horn to your TRX-4 or TRX-6 for total steering authority and increased durability. Replacement Part For:TRX-4 1979 Chevrolet BlazerTRX-4 1979 Ford...

This is the Traxxas 55-Tooth Spur Gear for 4-Tec 2.0. This is designed for use with 4-Tec 2.0 vehicles running the VXL brushless power system. Fits4-Tec 2.0

This is a pair of Traxxas Slash Paddle Tires Mounted on Chrome Wheels. These fit the Slash 4x4 front and rear, or the Slash 2WD rear. Put these on your truck for added grip on sand, snow, mud, or the occasional blast across the water!Tires & wheels,...

This is the Traxxas 20-Tooth Pinion Gear with 1.0 Mod Pitch and a 5mm Shaft Bore. 20-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model...

This is the Traxxas 20M Weight Differential Oil. Super-thick 20 million weight differential oil has the consistency of thick putty and is most often used in center differentials. It may also be used to lock front or rear differentials when equal power...

This is the RPM Low Visibility Wheelie Bar for use with RPM Bumpers on the Traxxas Slash 2WD, Slash 4x4, and Losi Ten-SCTE short course 1/10 scale trucks. These must be used with the RPM bumpers for the Slash, or the RPM bumper mounts for the Ten-SCTE.A...

This is a pair of RC4WD Mud Slingers 2.2" Rock Crawler and Trail Truck Tires. These feature advanced X3 Soft Compound rubber and have an ultra-aggressive off-road tread pattern.SpecificationsOuter Diameter: 4.88" (124mm) Width: 1.93" (49.1mm) Inner...

This is the Tekno RC M6 Driveshaft and Rear Hub Set for the Traxxas Hoss 4x4, Rustler 4x4, Slash 4×4 and Stampede 4x4 trucks. Featuring massive 6mm stub axles, this set will give your truck the ultimate in performance and durability...

This is the Traxxas TRX-4 Bronco Grill with Retainers, Headlight Housings, and Lens for use in the part 8010 Series Bodies.Stock Replacement OnTRX-4 Ford Bronco

This is a set of Traxxas Stub Axle Pins.  These pins slide through the axle and keep the wheel hexes from spinning on the axle. Set of four stub axle pins Replacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBIGFOOT No...

This is a Traxxas 48P, 90T Spur Gear for models with Torque Control Slipper Clutch. FEATURES:48 pitch90 toothDesigned for models with a slipper clutchBlack plastic construction INCLUDES:One spur gear SPECS:Pitch:   48Tooth:   90

This is the Pro-Line Raid Front/Rear 2.2"/3.0" 12 & 14mm SC Silver/Black Bead-Loc Wheels (2) for the Front/Rear 2WD Slash and Rear 4WD Slash. Features One sided Bead-Loc captures both sides of tire evenly Removable Hexes for Quick Wheel Offset...

This is the Traxxas 21-Tooth Pinion Gear (48-pitch) with set screw.Fits:1/10 Monster Jam Trucks1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave Digger1/16 Kyle Busch Truck1/16 Rally VXL1/16 Slash 4x41/16...

This is a 2-ounce bottle of Team Associated 10-Weight Silicone Shock Oil.Features100% pure silicone oilWill not thin out in hot weather or thicken up in cold weatherIncludes: One 2 oz. bottle of silicone oilSpecifications:10wt (the higher the weight...

This is the Traxxas Jato Straight air filter housing with foam insert and cable tie. Fits Jato with the TRX 2.5, 2.5R, or 3.3 engine. Replacement Part ForJatoTRX 2.5RTRX 3.3

This is the Traxxas 4-Tec 2.0 Steel Inner Drive Cups and Screwpins for use with CV-Driveshafts (2). Steel inner CV drive cups offer superior durability for high-power setups. Includes: Screw pins (2).Accessory Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL...

This is the Traxxas TRX-4 Spool/locker, Differential Housing Plug, and E-Clip. These can be used in the front and rear diffs to completely lock the differential.Replacement Part OnTRX-4 SportAccessory Part ForTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land...

This is the RPM Black Front Bulkhead for Traxxas 2WD trucks, including the Slash 2WD, Nitro Slash, Rustler, Nitro Rustler, Stampede 2WD, Skully, Craniac, Bigfoot, Nitro Stampede, and Bandit trucks and buggies.This part is a direct replacement for Traxxas...

This is the Traxxas Antenna Cap Set with Antenna Spool. The antenna spool is used for wrapping excess antenna wire before inserting it in the antenna tube to prevent wire from hanging out the end of the tube, preventing damaged antenna wires caused by...

This is the Traxxas Power Cell 11.1V 1400mAh 25C 3S LiPo Battery with iD Connector for use with Traxxas 1/16 VXL Brushless Vehicles. This Traxxas 2823X battery is ideal for the 1/16 E-Revo VXL, Summit VXL, Slash 4x4 VXL, Rally VXL, and Mustang VXL...

This is a package of three Traxxas Air Filter/Pre-Filter Foam Inserts for the Traxxas 3.3 racing engine.  This engine is used on vehicles such as the Revo, Jato, and T-Maxx. Features: Constructed of foam and pre-oiled to trap dirt Pre-Filter...

This is the Traxxas Heat Shield Tubing for Fuel Line (2) Fiberblass heat shield tubing Replacement Part ForJatoNitro RustlerNitro SlashRevoSlayer Pro 4X4T-MaxxTRX 2.5RTRX 3.3

These are the JConcepts Renegades Gold Compound Monster Truck Tires and Foam Inserts (2). The "gold" compound feels harder to the touch and excels on carpet, AstroTurf and polished concrete surfaces and expands less during high-speedsFits - JConcepts...