This is a set of Traxxas Pivot Ball Caps (4) for E-Revo, Revo 3.3, and Revo 2008 Limited Edition. Two sets required for complete truck. Pivot ball cap set Includes(4) Pivot ball caps(4) Rubber dust boots (4) Rubber dust plugs (4) Blue dust boot retainers...

This is the Traxxas 2-Amp AC Wall Charger for 5-7 Cell, 6-8.4V NiMH ID battery packs. This is the perfect option to charge your batteries from a wall outlet at a reasonable price.Charges 5-cell (6-volt), 6-cell (7.2-volt), or 7-cell (8.4-volt) Traxxas...

These are the Traxxas Replacement Drive Shaft Boots for the Revo, T-Maxx 3.3, E-Maxx 3905, and other vehicles. Features: Rubber Construction Blue in Color Includes:Two Blue Rubber Driveshaft Boots

This is the Hot Racing Traxxas VXL-3s ESC Aluminum Heat Sink and High Velocity Fan. This is a great upgrade for all Traxxas VXL brushless vehicles, including the Slash 2WD VXL, Slash 4x4, Stampede 4x4 VXL, Stampede 2WD VXL, Rustler VXL, and Bandit VXL...

These are the Traxxas 30-Degree Castor Blocks for the Rustler, Stampede 2WD XL-5 and VXL, Slash 2WD, and Nitro Slash trucks. Replacement 30° left & right caster blocks FEATURES:Black Plastic ConstructionINCLUDES:Two Caster Blocks Replacement Part...

This is the Traxxas Male Battery Connector Set (2).  These are for use as an ESC connector. Note: 4S Traxxas ID batteries are not compatible with these connectors due to the connector shape.

This is the LaTrax Dual Port USB Charger for the 650mAh Lipo batteries used in the LaTrax Alias Quad-Rotor Helicopter. This charger makes it possible to charge two batteries at once!

This is the Traxxas Battery hold-down, tall (1)/ hold-down retainer, front & rear (1 each) (allows for installation of taller, multi-cell batteries)Extended battery hold-down with front and rear retainers accommodates taller batteries on vehicles...

This is a Red Aluminum Pushrod Set (2 rods) with installed rod ends for use with Progressive 1 (part TRA5357), Progressive 2 (part TRA5358), or long travel rockers. These pushrods are 102mm in length. If you would like to replace the front and rear...

This is the Hot Racing Blue Aluminum Heat Sink Cooling Fan for use on 540 and 550 brushed and brushless motors in vehicles like the Traxxas Rustler XL-5 and VXL, Stampede 2WD, Stampede 4x4, Slash 2WD, Slash 4x4, and more! The versatile two-piece heat...

This is a pair of RPM Upper and Lower Suspension A-Arms for the Traxxas X-Maxx 6S and 8S trucks. This includes one upper and one lower arm. The upper arm replaces Traxxas part 7729, and the lower arm can be used in place of Traxxas part 7730 or 7731. To...

This is the Traxxas Steering Bellcrank Set for the Slash 2WD, Slash 4x4, 1/10 Rally, Bandit, Rustler, and Stampede 4x4 vehicles. Features: Composite nylon construction Replaces a worn or damaged bellcrank set Includes:One Left Bellcrank LowerOne Left...

This is the Traxxas TQi 2.4 GHz High Output 2-Channel Radio System with Traxxas Link Enabled and TSM 2-Ch Transmitter, 5-Ch Micro Receiver) Replaces transmitter: TRA6509R

This is the Traxxas TQi 2.4 GHz High Output radio system, 4-channel with Traxxas Link Bluetooth module and TSM 4-Ch Transmitter, 5-Ch Micro Receiver) Replaces transmitter: TRA6507R

These are the RPM Body Savers for Traxxas E-Revo 2.0 trucks. These are perfect to upgrade a stock body before use, or to repair/salvage an already damaged body to prevent having to buy a new one right away.RPM engineers examined a brand new E-Revo 2.0...

This is the Traxxas 2082 Gear Set for the 2080 Micro Waterproof Servos.These have been used in vehicles such as:1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave Digger1/16 Kyle Busch Truck1/16 Rally VXL1/16...

This is a Traxxas Steel Differential Ring and Pinion Gear Set for the 1/16 E-Revo, Summit, Slash, Rally, and other 1/16 Traxxas vehicles. This will fit both XL-2.5 and VXL models.Includes:One Differential Ring GearOne Pinion Gear

This is the RC4WD 540 Crawler 55-Turn Brushed Motor for use in 1/10 scale rock crawlers from RC4WD, Axial, and other crawlers and scale trail vehicles. It comes pre-wired with bullet connectors.Features:Custom made 540 Steel case Chrome plated case...

This is the Hot Racing Steel Helical Spiral Differential Gear Set for the Traxxas 1/16 4X4 vehicles, including the 1/16 E-Revo, 1/16 Slash 4X4, 1/16 Rally, and 1/16 Summit. This set is compatible with the front or rear differentials. This is a perfect...

This is the Power Hobby Aluminum RC Car Repair Work Stand Works with 1/8, 1/10, 1/12, 1/16 & 1/18 Scale RC Trucks/Cars/Buggies Features360-Degree Rotation SpecificiationsColor: BlueMaterial: Aluminum AlloyHeight: Adjustable from 3.54" (90mm) to 5.11"...

This is the RPM Pit-Pro Extreme Car Stand for 1/10 and 1/8 Scale vehicles. Car stands have been around for a long time, with minimal innovation or ingenuity. That changes NOW! The all-new RPM Pit-Pro Extreme Car Stand is a completely new and unique stand...

This is the Pro-Line PRO Car Stand with Multi-Use Toppers Car StandThe Pro-Line Car Stand is the most versatile solution for working on and displaying RC vehicles. Designed to replace outdated foam and bulky aluminum stands, it delivers smooth rotation,...

This is the Racers Edge 1/10 RC Car 2 Layer Pit/Display Stand The 1/10 Pit/Display Stand by Racer's Edge is a two-layer stand designed to hold up to two 1/10 scale RC cars, with a compact fit for 1/8 scale models. Its foldable design and included...

This is the GPM Racing Hardened Steel Center Driveshaft Set for Traxxas 1/16 E-Revo, 1/16 Summit, and 1/16 Slash 4x4 trucks. These are built to handle just about anything you can throw at them. Four new screw pins are included to complete the...

These are the Pro-Line BFGoodrich Krawler T/A KX 1.9" Predator Rock Crawler Tires (2) with Foam Inserts for 1/10 Rock Crawlers. These are 4.75" tall, giving great performance and realism in a licensed design of the popular full-scale tire...

This is the Traxxas LaTrax Metal Differential Gear Set with Output, Spider, and Ring Gears. This is an excellent upgrade for LaTrax vehicles that originally came with plastic gears. It is a direct replacement for the newer vehicles equipped with metal...

This is the Integy Type II Silver Aluminum Rear Shock Tower for the Traxxas Stampede 2WD XL-5, Rustler and Slash 2WD FEATURES Silver in color Fits rear of vehicle INCLUDESOne Type II Aluminum Rear Shock Tower REQUIRESInstalling on...

These are Optional Rear Bearing Carriers for the Traxxas Electric Rustler, Stampede and Bandit. The rear axles fit into these bearing carriers. FEATURES Black nylon construction INCLUDESTwo rear bearing (hub) carriersTwo RPM...

This is a Traxxas Large Servo Saver for Futaba, Hitec, Airtronics, and Traxxas servos. This will work on most vehicles requiring a large servo saver. The servo saver protects your steering servo by absorbing shocks that might otherwise cause internal...

This is a bottle of Traxxas 50K Weight Diff Oil (1.75 oz / 50cc) with filler nozzle. This oil can be used to tune differentials in many Traxxas vehicles for peak performance!For use in these vehicles and more!1/10 E-Revo Brushed1/10 E-Revo Brushless1/10...

This is a Hitec HS-81S Micro Servo.  These are great for small electric planes, helis, and small cars.  This has the universal connector that works with JR, Hitec, Futaba, and Airtronics, and also works with some micro RTR vehicles...

This is the Traxxas Complete Stainless Steel Suspension Hinge Pin Kit for the T-Maxx and E-Maxx trucks. These fit all versions of the T-Maxx .15, 2.5, 3.3, E-Maxx, and E-Maxx Brushless trucks. Designed to upgrade the stock, threaded suspension arm...

This is a Hitec D956WP 32bit High Torque Waterproof Steel Gear Digital Servo.  This IP-67 rated version is the true waterproof, dust resistant upgrade for 1/10th-scale Rock Crawlers and Off-Road Trucks. This technologically-advanced servo is powered...

This is a Hitec D485HW 32-Bit Wide Voltage Karbonite Gear Servo.  Replacing the standard-size HS-5485HB and HS-5495BH servos, the sport class D485HW brings faster response and accuracy to your various radio control needs with D-series high...

This is a pair of RC4WD Mud Slinger 1.9 Tires with Foam Inserts, for use with 1.9-inch rock crawler wheels. These are made with the X3 SS soft and sticky compound rubber for excellent off-road grip.FEATURES: Advanced X3 SS compound (soft & sticky) ...

This is the Hitec HS-5065MG Digital Micro Servo from Hitec with Universal connector, compatible with Futaba J, Hitec S, Spektrum, JR and Airtronics Z Connector. The connector is compatible with all modern 3-wire receivers and wiring accessories.The...

This is a set of two LaTrax Alias Quadcopter 78-tooth spur gears.Includes:Two 78T spur gears

This is the RPM Front Bumper and Skid Plate for use on the Traxxas Slash 4x4 Vehicles. When Traxxas first announced the 4x4 version of the Slash, RPM customers immediately started asking us if our 2wd version parts would fit it. Sadly, that was not the...

This is the Innovative Hobby 1/64 scale PhotoReal Slot Car Guard Rail Set Model Motoring Red & White Style 3 "Soft Rail" Guard RailsThis unique smooth guard rail system is clipless and gives you 1/8" extra track room for your cars. Your slot cars...

This is the Innovative Hobby 1/64 scale PhotoReal Slot Car Guard Rail Set Model Motoring Black & White Style 6 "Soft Rail" Guard RailsThis unique smooth guard rail system is clipless and gives you 1/8" extra track room for your cars. Your slot cars...