Traxxas T-Maxx 2.5 & 3.3
Whether you prefer something that runs off a battery or real live fuel, you’ll love the Traxxas T-Maxx line. There’s more than enough here to keep you going for years no matter what your particular modeling interests might look like. Enough aftermarket components have been made by Traxxas for this line that you could continue to tinker with the same model for years to come. Chances are that you’d be able to seriously dominate many types of tracks with them too, which makes them a great option for hardcore racers.
T Maxx 3.3
Over time, Traxxas has been able to collect a lot of information about the various performance figures of their own vehicles. They’ve put this information to good use by taking it and redesigning countless vehicles. Modern Traxxas T-Maxx 3.3 models offer a 4WD powertrain and a TSM stability management system coupled with TQi telemetry and a number of other high-tech features that might make you feel like you’re driving a miniaturized computer as well as a truck.
In many ways, you actually are! These sophisticated pieces of equipment incorporate advanced computer technology that ensures a level of stability and drivability even when conditions start to suffer for whatever reason.
Traxxas T Maxx 2.5
You don’t want to count out the classic T Maxx 2.5 vehicle either, however, especially if you’re in the mood to drive something that features nitro power. A strong 2.4 GHz transmitter means that you’ll be able to stay in constant communication with your vehicle even if it happens to be on the other side of the track at any given time. Perhaps most importantly, these trucks are compatible with a selection of special fuels from Traxxas. consider 20 percent Nitro car and truck fuel, for instance.
This has the same name as the top fuel materials that real-world hot rods might run on and for a good reason. It’s not all that different from any other kind of nitro-based fuel, so you can expect some strong performance out of it.
Eventually, you might even want to start investing in a selection of replacement parts that can help you out in a pinch.
Traxxas T Maxx Parts
From something as simple as a set of body washers to an extremely complex part like a Bluetooth wireless module, Traxxas T Maxx cars have a wide-ranging catalog of parts that go with them. Whether you’re looking for spares to repair racing accidents or you want to be able to tinker with a vehicle until you can truly call it your own, there are plenty of options available on the market. You may want to start putting together quite a collection, which would ensure that you’d always have something on hand if a part failed on you or if you needed to do some kind of work under your model’s hood.
For more information about what kinds of vehicles and parts are currently being offered, make sure to contact RC Superstore online.
-
TRA5379RTraxxas Machined Spiral Cut Differential Ring & Pinion Gears (Front)
This is the Traxxas Machined Spiral Cut Front Differential Ring and Pinion Gear. These are used as an upgrade over the 5379X gears found in many vehicles. Spiral-cut 37-tooth ring and 13-tooth pinion front differential gear sets are CNC-machined from a...$3995 -
TRA5364XTraxxas High-Performance Vented Brake Disc for Revo, Slayer, T-Maxx 3.3
This is the Traxxas High-Performance Vented Brake Disc for Revo, Slayer, and T-Maxx 3.3 trucks. The vented design dissipates heat better for stronger, more consistent braking throughout a run.FeaturesSteel construction, silver in colorTrue vented design...$1995 -
TRA2577Traxxas 3x10mm Buttonhead Hex Machine Screws (6)
These are the Traxxas 3x10mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used across many of the Traxxas vehicles.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Rally1/10 Summit1/16 E-Revo Brushed1/16 E-Revo VXL...$250 -
TRA2552Traxxas Hex Drive Screws, 3x12mm (6): Revo, Slayer
This is a package of six 3x12mm Traxxas Countersunk Hex Head Screws. Features:Steel constructionBlack in colorUsed on the Traxxas Revo monster truck, can also be used in any application where a 3x12mm countersunk screw is required Includes: Six 3x12mm...$250 -
TRA5347Traxxas Large Rod Ends w/Hollow Balls (12): Revo
This is a package of Traxxas Large Rod Ends and Hollow Balls for the Revo 2.5 and 3.3 trucks. There are 12 rod ends and hollow balls per package. FEATURES:Plastic constructionBlack in colorMetal Pivot Balls INCLUDES:12 Rod Ends12...$9 -
TRA5193XT-Maxx 2.5 Single Speed Conversion Kit
This is the Traxxas Single Speed Conversion Kit for the T-Maxx 2.5. This reduces weight and rotational mass, allowing for quicker revs. Convert your two-speed T-Maxx transmission to a single-speed unit for reduced weight and less rotational mass with...$11 -
TRA4962Traxxas Big Bore Shock Set (8): T-Maxx .15, 2.5, 3.3, & E-Maxx
This is the Traxxas Optional Big Bore Shock Set for the Traxxas T-Maxx .15, 2.5, 2.5R, 3.3, and E-Maxx Trucks. These replace the plastic shocks that come stock with the kit. This includes everything to get the full set of eight shocks...$9995 -
TRA3979Traxxas Differential Housings & Pinion Collar for E-Maxx & T-Maxx 3.3
This is the Traxxas Differential Housing and Pinion Collar Set for the E-Maxx, E-Maxx Brushless, and T-Maxx 3.3 trucks.Includes: Left and Right Differential Housings and Pinion Collar FitsE-MaxxE-Maxx BrushlessT-Maxx 3.3$4 -
TRA2580Traxxas 3x20mm Buttonhead Hex Machine Screws (6)
These are the Traxxas 3x20mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used in many different Traxxas vehicles.Replacement part forBandit VXLDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0Ford F-150...$250 -
TRA5353Traxxas Blue Anodized Wheel Nuts,17mm (4): Revo, T-Maxx 3.3, E-Maxx Brushless
Traxxas Splined 17mm Wheel Nuts (blue-anodized) (4) This set of four 17 mm blue aluminum wheel nuts is beautiful anodized for eye-catching looks with Traxxas-tough durability.$10 -
TRA4936Traxxas Bumper Mounts, Front & Rear: T-Maxx & E-Maxx
This is the Stock Replacement Bumber Mount Set for the Traxxas T/E Maxx trucks. These mounts attach the bumpers to the bulkheads. FEATURES:Black nylon construction INCLUDES:One L&R Front Bumper Mount SetOne L&R Rear Bumper Mount SetEight 3x15mm...$375 -
TRA3767GTraxxas Green Aluminum Ultra Shock Cap Set
This is the Traxxas aluminum (Green Anodized Shock Caps Shock caps, aluminum (green-anodized) (4) (fits all Ultra Shocks)Aluminum shock caps are great way to boost the durability and style of any Traxxas vehicle equipped with Ultra Shocks. The machined...$14 -
TRA2074Traxxas Servo Case & Gaskets for 2056 & 2075 Servos
This is the Traxxas 2074 Servo Case and Gasket Set for 2056 and 2075 Waterproof Servos. Replacement Part For 4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisBandit VXLBanditBIGFOOTBlastChevrolet Corvette StingrayDrag SlashE-Revo VXL BrushlessFactory Five...$6 -
TRA5334RTraxxas Axle Carriers for Revo, E-Revo, E-Maxx, T-Maxx, Summit, Slayer
This is a pair of Traxxas Axle Carriers for Revo 3.3, E-Revo, E-Maxx, T-Maxx, Summit, Slayer. These are for use with 6x13mm ball bearings, or use the included bearing adapters to run 6x12mm ball bearings.Includes:One Left Axle CarrierOne Right Axle...$10 -
RPM81072RPM Black Rear Bulkhead Set: T-Maxx 2.5, 3.3, E-Maxx
These are the RPM Black Rear Bulkheads for the Traxxas T-Maxx .15, 2.5, 3.3, E-Maxx, and E-Maxx Brushless trucks. These are backed by RPM's industry-leading lifetime breakage warranty.RPM Rear Bulkheads for the T-Maxx & E-Maxx, combined with RPM front...$1099 -
TRA5451XTraxxas Driveshaft Assembly: T-Maxx 2.5R, 3.3, Revo 3.3, E-Maxx 3905
This is the Traxxas Driveshaft Assembly for the Revo 3.3, T-Maxx 2.5R, T-Maxx 3.3, and E-Maxx 3905 vehicles. This is the driveshaft that goes from the differential to the wheel. This will work on the front or rear, right or left of the truck...$12 -
TRA5674Traxxas Maxx 6.3" Tires & Geode Chrome Wheels w/17mm Splined Hex
This is a pair of Traxxas Maxx 6.3" Tires Pre-Mounted on Geode Chrome Wheels with a 17mm Splined Hex.FeaturesNylon constructed Geode Chrome WheelsPre-Mounted Maxx 6.3" TiresIncludes: Two Maxx Tires premounted on Geode Chrome WheelsOptional: Sidewall...$3595 -
TRA5291Traxxas TRX 3.3 Engine Wrist Pin & Wrist Pin Clips
This is the Traxxas TRX 3.3 Engine Wrist Pin with Wrist Pin Clips. This is a replacement wrist pin for the 3.3 engine in vehicles like the Jato 3.3, Nitro 4-Tec, Nitro Slash, Revo 3.3, Slayer Pro, and T-Maxx 3.3.$350 -
TRA4973RTraxxas Tires on 3.8" Hurricane Chrome Wheels: T-Maxx, Revo
This is the Traxxas Tires on 3.8" Hurricane Chrome Wheels The massive 6.3” Maxx wheel and tire combo deliver incredible grip off-road and increased ground clearance to overcome deep ruts and huge obstacles. They come pre-glued to 3.8" chrome...$3595 -
TRA5353XTraxxas Anodized Wheel Hubs& Hex Kit, 17mm (4) T-Maxx 3.3 & 4WD Nitro Monster Truck
These are the Traxxas Blue Aluminum 17mm Splined Wheel Hubs and Nuts for vehicles such as the T-Maxx 3.3, Revo 3.3, E-Revo Brushless, E-Maxx Brushless, Summit, Slayer Pro, and others.Newly designed 17mm racing hubs and wheel nuts incorporate new...$2195 -
TRA4937ATraxxas Front Skidplate: T-Maxx 3.3 Truck (Gray)
This is the Front Plastic Skidplate for the T-Maxx 3.3. FEATURES Attaches to and protects chassis and supports the front bulkhead Skidplate is gray in color INCLUDESSkidplate and stainless steel plate REQUIRESInstalling on chassis with four 3x12mm...$6 -
TRA4975Traxxas Wheelie Bar Assembly for T-Maxx, E-Maxx & Stampede 4x4
This is an optional Traxxas Wheelie Bar for all Traxxas T-Maxx and E-Maxx series vehicles. This can also be used with Stampede 4x4 trucks using the stock rear bumper/wheelie bar mount (part 6777).FeaturesConstructed of hardened plastic, black in...$20 -
TRA4472RTraxxas 72T Spur Gear (M0.8 Pitch): Nitro Rustler
This is the Traxxas 72T Spur Gear for the Nitro Rustler. FEATURES:Made of black nylonUses friction pegs INCLUDES:Traxxas 72T Spur Gear for the Nitro Rustler SPECS:72 tooth$3 -
RPM80465RPM Upper & Lower Suspension Arms (2) (Blue): T-Maxx 2.5, 2.5R, 3.3, E-Maxx
This is an RPM Blue Upper and Lower Suspension A-Arm set for the Traxxas T-Maxx 2.5, 2.5R, 3.3, as well as the E-Maxx trucks. These will also fit other trucks that came with the WideMaxx suspensions such as the SportMaxx...$799 -
INTT3657Integy T-Maxx 3.3 & Jato 58T Steel Spur Gear
This is the Team Integy 58-Tooth Steel Spur Gear for the Traxxas Jato 2.5, 3.3, and T-Maxx 3.3 trucks. This is MUCH stronger than a plastic spur gear. The Integy spur gears feature color-coded rings to allow easy identification. Going to a smaller...$1499 -
TRA5261Air Filter Foam Inserts: TMX 2.5, Revo
This is a package of three Air Filter Foam Inserts for the Traxxas 2.5 engine. FEATURES:Constructed of foam and pre-oiled to trap dirt INCLUDES:Three Air FIlter Inserts for the Traxxas 2.5 engine REQUIRES:Installing in air filter boot on...$625 -
TRA2668Traxxas Spring Retainers & Spacers for Big Bore Shocks
These are the Traxxas Big Bore Shock Upper and Lower Spring Retainers and 5 different thicknesses of spring pre-load spacers, from 1mm to 8mm. Replacement Big Bore Shock retainer set features upper and lower spring retainers (2), and spring pre-load...$550 -
TRA5280Traxxas EZ-Start 2 Complete Control Box
This is a Complete Control Box for the Easy Start 2 on the Traxxas Tmaxx. This houses the 7.2V battery for the Easy Start, and provides the start button. Also for the Tmaxx 3.3. FEATURES Black plastic construction Green motor and glow plug...$15 -
TRA5383Traxxas Revo 2.5 & 3.3 Close Ratio 2-Speed Tranny Gears
This is a Two-Speed Close Ratio Gear Set for the Traxxas Revo transmission. These parts are located in the center transmission. FEATURES:White plastic construction INCLUDES:One 40T 2nd speed gearOne 13T/16T input gearOne screw pin REQUIRES:Installation...$750 -
TRA4609Bearings (2) - 5x10mm (fits 18t TMX clutch bell)
This is a pair of Traxxas 5x10x4mm ball bearings. These are used in the clutch bells of many of the Traxxas vehicles. FeaturesThe bearings are constructed of stainless steel Includes2- Bearings Specs5x10x4mm$8 -
TRA3432Traxxas Curved Tip Body Scissors
This is the Traxxas Curved Tip Heavy Duty Body Scissors for cutting and trimming polycarbonate RC bodies. To do a good job on a custom body, the right tools are a must. Having both a curved tip and straight tip (Traxxas part TRA3431) scissors in your...$895 -
TRA5672Traxxas Paddle Tires on Geode Wheels 17mm Hex for 1/10 Revo, E-Revo, E-Maxx, T-Maxx, Summit
This is a pair of Traxxas Paddle Tires on Geode Chrome Wheels with a 17mm Splined Hex for 1/10 Revo, E-Revo, E-Maxx, T-Maxx, and Summit trucks. These are a must-have for running in mud, snow, or sand.Requires17mm splined hex hubsFits these vehicles...$5795 -
TRA5185Traxxas Replacement Rubber Wheelie Bar Tires
This is a pair of Traxxas Replacement Wheelie Bar Rubber Tires for the Traxxas aluminum aftermarket wheel sets (part 5186 & 5186A) used on many vehicles.Includes: Two Rubber Tires for the Wheelie BarSpecificationsOuter Diameter: 1.1" (29mm)Inner...$7 -
TRA3767Traxxas Shock Caps & Bottoms: TMX .15, 2.5, Bandit, Rustler, Stampede
These are Shock Caps and Bottoms for Traxxas kits. Shock caps (2) and shock bottoms (2) for Traxxas Ultra Shocks Specifications:Diameter:Tops: 16mmBottoms: 13mm Replacement Part ForFord Fiesta ST RallyHoss 4X4 VXLNitro RustlerNitro SlashRustler 4X4...$3 -
TRA1834Traxxas Standard Size Body Clips (12)
This is the Traxxas Standard Size Body Clips (12) - Standard-duty body clips Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 SummitBandit VXLBanditBIGFOOTJatoNitro RustlerRevoRustler VXLRustlerSlayer Pro 4X4Stampede...$2 -
TRA1815Traxxas Body Washers
This is the Traxxas replacement Body Washers. FEATURES Nylon construction Helps prevent the body mount hole from cracking prematurely White in color SPECSOuter Diameter: 0.87" (22mm)Inner Diameter: 0.26" (6.7mm) INCLUDESEight large body mount washers$2 -
TRA5147XTraxxas Steel 5mm Nuts (8): E-Maxx, Slayer
This is a package of 5mm Flanged Nylon Locking Nuts from Traxxas. FEATURES:Constructed of steel with serrated flange area for sure gripNylon insert INCLUDES:Eight 5mm Flanged Nylon Locking Nuts REQUIRES:8mm nut drivers SPECS:Hex Size: 8mmInner Diameter:...$350 -
TRA5348Rod Ends for Rear Toe Link: Revo
This is a package of Traxxas Large Rod Ends for the Rear Toe Link for the Revo 2.5 and 3.3. These can be broken easily if you run your truck on anything but smooth ground. It is a good idea to have spares on hand.$2 -
TRA5247Traxxas Carburetor O-Ring and Seal Kit: TRX 2.5
This is an O-Ring and Seal Set for the TRX 2.5 Engine. FEATURES Complete seal and ring set. Black, blue and red rubber construction. Brass ring installation tools. INCLUDESTwo brass ring installation tools.One blue rubber carburetor level seal.Two...$4 -
TRA4120Traxxas 20T Clutch Bell: NST, TMX .15 and 2.5
This is a Traxxas 20-Tooth Clutch Bell for the Traxxas T-Maxx .15, 2.5, 2.5R, 3.3, Revo, Jato, Nitro Rustler, and Nitro Stampede, Nitro 4-Tec. The higher the number of teeth on your clutch bell, the higher your top speed. The lower...$12