Traxxas Stampede 2WD XL-5 & VXL RC Trucks, Parts & Upgrades
Traxxas Stampede 2WD XL-5 VXL
Do you want something that’s race-ready yet still a great option for beginning model drivers or younger motorsports enthusiasts? If so, then you’re going to want the Stampede XL-5. It’s got a top speed of around 30 MPH measured in real rather than scale miles, so you can be sure that it’s going to offer a ton of real action without sacrificing a whole lot in terms of control.
In many ways, we consider the Traxxas Stampede line to be the original high-performance offload monster truck at the RC Superstore. Best of all, the stock performance figures of this vehicle can be upgraded through judicious use of aftermarket parts.
Traxxas Stampede 2WD Parts & Upgrades
While each of these models offers some serious scale horsepower, you’re eventually going to run into a situation where you might either want some replacement parts or you’re going to need to upgrade one of the underlying components. Perhaps you’ll want to start with a cooling fan or another component that includes comparable moving parts. Since these components rotate, you may want to keep a few extras on hand if you do any real hardcore driving. Motors themselves, however, are what most people are going to be looking into.
2WD Brushless Motors
Waterproof brushless motor assemblies are what makes the Stampede series so attractive. Motor brushes have to be periodically replaced on any design that makes use of them, but Stampede VXL brushless motor systems don’t require any such small parts to be installed. As a result, you can keep your vehicle running longer without having to worry about opening the physical motor housing and making adjustments. This is good news for anyone who wants to start investing in additional motors because they’re going to be seriously racing.
On top of a motor, you might want an extra battery.
Stampede LiPo Battery
Don’t get caught without the power you need to reach further destinations than you ever thought possible. Invest in an additional LiPo battery as well as NiMH/LiPo chargers so you can keep your vehicle out on the road longer. When your current pack runs down, swap it out for a fully charged one and then place it into this dock. It’ll convert mains line power into potential DC energy that your Traxxas model can use in its efficient LiPo batteries.
Stampede VXL
The Stampede VXL uses the Velineon brushless power system, which can push these trucks to over 65 MPH if you’re using LiPo power. Both the XL-5 and VXL trucks include a tri-mode speed controller that offers an optional training mode for those who are just learning to control a model that has this kind of performance. No matter what kind of driver you are, there’s something to appeal to you in these kits.
If you’re still not sure what kind of 2WD Traxxas truck might be right for you, then contact us online at the RC Superstore for more information.
-
RRP8713Robinson Steel 13T Pinion - 5mm Bore 0.8 Mod (31.75P)
This is the Robinson Racing Extra Hard Steel 13-Tooth 0.8 Mod Pinion Gear with 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless, and Summit...$849 -
RRP8711Robinson Steel 11T Pinion - 5mm Bore 0.8 Mod (31.75P)
This is the Robinson Racing Extra Hard Steel 11-Tooth 0.8 Mod Pinion Gear with 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless, and Summit...$849 -
GPM-CRA030A-GSGPM Aluminium Rear Shock Stay Mount (Gray Silver)
This is the GPM Aluminium Rear Shock Stay Mount (Gray Silver) Accessory Part ForTraxxas 1/10 Monster Jam TrucksTraxxas Bandit VXLTraxxas Bandit XL-5Traxxas CraniacTraxxas Rustler VXL 2WDTraxxas Rustler XL-5 2WDTraxxas SkullyTraxxas Slash 2WDTraxxas Slash...$599 -
GPM-RUS022-BKGPM Black Aluminum Rear Stub Axle Carriers for 2WD Stampede Rustler Slash Bandit
These are the GPM Racing Black Aluminum Rear Stub Axle Carriers for Traxxas electric Slash 2WD, Rustler 2WD, Stampede 2WD, and Bandit vehicles. These are made of 6061-T6 aluminum and anodized to finish them off. They are durable and look great!These are...$1590 -
GPM-CRA030-BKGPM Black Aluminum Rear Shock Tower for 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Black Aluminum Rear Shock Tower for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, and Bandit vehiclesThis is a direct replacement for the stock Traxxas part 3638 shock tower.Accessory Part ForTraxxas 1/10 Monster Jam...$1699 -
GPM-CRA028-RGPM Red Aluminum Front Shock Tower for 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Red Aluminum Front Shock Tower for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, Bandit, and Nitro Stampede trucks.This is a direct replacement for the stock Traxxas part 3639 shock tower.Accessory Part ForTraxxas 1/10...$999 -
RRP8722Robinson Extra Hard 5mm Bore 22T Pinion 0.8 Mod (31.75P)
This is the Robinson Racing Extra Hard 22-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless,...$849 -
GPM-SLA2W028-ORGPM Orange Aluminum Front Shock Tower fits 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Orange Aluminum Front Shock Tower for Traxxas Slash 2WD, Rustler 2WD, Stampede 2WD, and Bandit vehicles. Made of 6061-T6 aluminum with an anodized finish, these are durable and help make your truck stand out! Stainless steel...$1890 -
GPM-SLA055-BKGPM Black Aluminum Lower Suspension Arm for Front/Rear 4x4 Slash Stampede, Rear of 2WD Stampede & Rustler
These are the GPM Racing Black Aluminum Lower Suspension Arms for the Front or Rear of the Traxxas 1/10 Slash 4x4, Stampede 4x4, Rustler 4x4, XO-1, or the rear of the Stampede 2WD and Rustler 2WD vehicles. These are made of 6061-T6 aluminum for improved...$2390 -
GPM-RUS003F-BKGPM Black Aluminum Front Bumper for 2WD Stampede Rustler Bandit
This is the GPM Racing Black Aluminum Front Bumper for Traxxas Rustler 2WD, Stampede 2WD, Bandit and several other vehicles listed below. Made of 6061-T6 aluminum, these are durable and look great.These are replacements for Traxxas part 2735.Accessory...$999 -
RRP8718Robinson Extra Hard 5mm Bore 18T Pinion 0.8 Mod (31.75P)
This is the Robinson Racing Extra Hard 18-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless,...$899 -
GPM-RUS030-BKGPM Black Aluminum Rear Shock Tower fits 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Black Aluminum Rear Shock Tower for Traxxas electric Stampede 2WD, Slash 2WD, Rustler 2WD, and Bandit vehicles. These are machined from 6061-T6 aluminum and anodized with a beautiful finish. Mounting hardware is also included...$1699 -
GPM-CRA332F-BKGPM Black Aluminum Front Bulkhead for 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Black Aluminum Front Bulkhead for Traxxas electric Stampede 2WD, Slash 2WD, Rustler 2WD, Bandit, Nitro Slash, Nitro Rustler, and Nitro Stampede trucks.This is a direct fit upgrade for the stock Traxxas part 2530A bulkheads...$1999 -
GPM-RUS003F-ORGPM Orange Aluminum Front Bumper for 2WD Stampede Rustler Bandit
This is the GPM Racing Orange Aluminum Front Bumper for Traxxas Rustler 2WD, Stampede 2WD, Bandit and several other vehicles listed below. Made of 6061-T6 aluminum, these are durable and look great.These are replacements for Traxxas part 2735.Accessory...$999 -
GPM-CRA022-RGPM Red Aluminum Rear Stub Axle Carriers for 2WD Slash Rustler Stampede Bandit
These are the GPM Racing Red Aluminum Rear Stub Axle Carriers for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, and Bandit vehicles.This is a direct replacement for Traxxas part 3752 hub carriers.Accessory Part ForTraxxas 1/10 Monster Jam...$1399 -
GPM-SLA057-BGPM Blue Rear Turnbuckle Camber Link for 4x4 Slash Rustler Stampede
These are the GPM Racing Blue Aluminum & Steel Rear Turnbuckle Camber Link for Traxxas brushless 1/10 Slash 2WD 4x4, Rustler 2WD & 4x4, Stampede 2WD & 4x4 and Nitro Slash vehicles. These feature aluminum rod ends with a durable steel turnbuckle for...$1990 -
GPM-SLA2W055-RGPM Red Aluminum Front Suspension Arms fits 2WD Stampede Rustler Slash
These are the GPM Racing Red Aluminum Front Suspension Arms for Traxxas Slash 2WD, Rustler 2WD, and Stampede 2WD trucks. Made of 6061-T6 aluminum and anodized for a great looking finish, these are tough and help make your truck stand out. Hinge pins and...$2690 -
GPM-SLA2W030-BKGPM Black Aluminum Rear Shock Tower for 2WD Stampede Rustler Slash
This is the GPM Racing Black Aluminum Rear Shock Tower for Traxxas Slash 2WD, Rustler 2WD, and Stampede 2WD trucks. Made of 6061-T6 aluminum with an anodized finish, these are durable and help make your truck stand out! Stainless steel mounting hardware...$2190 -
GPM-CRA028-GGPM Green Aluminum Front Shock Tower for 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Green Aluminum Front Shock Tower for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, Bandit, and Nitro Stampede trucks.This is a direct replacement for the stock Traxxas part 3639 shock tower.Accessory Part ForTraxxas 1/10...$999 -
GPM-CRA022-ORGPM Orange Aluminum Rear Stub Axle Carriers for 2WD Stampede Rustler Slash Bandit
These are the GPM Racing Orange Aluminum Rear Stub Axle Carriers for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, and Bandit vehicles.This is a direct replacement for Traxxas part 3752 hub carriers.Accessory Part ForTraxxas 1/10 Monster Jam...$1399 -
GPM-SLA055-ORGPM Orange Aluminum Lower Suspension Arm for Front/Rear 4x4 Slash Stampede, Rear of 2WD Stampede & Rustler
These are the GPM Racing Orange Aluminum Lower Suspension Arms for the Front or Rear of the Traxxas 1/10 Slash 4x4, Stampede 4x4, Rustler 4x4, XO-1, or the rear of the Stampede 2WD and Rustler 2WD vehicles. These are made of 6061-T6 aluminum for improved...$2390 -
GPM-CRA030-ORGPM Orange Aluminum Rear Shock Tower for 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Orange Aluminum Rear Shock Tower for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, and Bandit vehiclesThis is a direct replacement for the stock Traxxas part 3638 shock tower.Accessory Part ForTraxxas 1/10 Monster Jam...$1699 -
RRP8716Robinson Extra Hard 5mm Bore 16T Pinion 0.8 Mod (31.75P)
This is the Robinson Racing Extra Hard 16-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless,...$849 -
GPM-SLA2W055-GGPM Green Aluminum Front Suspension Arms fits 2WD Stampede Rustler Slash
These are the GPM Racing Green Aluminum Front Suspension Arms for Traxxas Slash 2WD, Rustler 2WD, and Stampede 2WD trucks. Made of 6061-T6 aluminum and anodized for a great looking finish, these are tough and help make your truck stand out. Hinge pins...$2690 -
GPM-RUS030-RGPM Red Aluminum Rear Shock Tower fits 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Red Aluminum Rear Shock Tower for Traxxas electric Stampede 2WD, Slash 2WD, Rustler 2WD, and Bandit vehicles. These are machined from 6061-T6 aluminum and anodized with a beautiful finish. Mounting hardware is also included.This...$1699 -
GPM-RUS030-GSGPM Gunmetal Aluminum Rear Shock Tower fits 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Gunmetal Aluminum Rear Shock Tower for Traxxas electric Stampede 2WD, Slash 2WD, Rustler 2WD, and Bandit vehicles. These are machined from 6061-T6 aluminum and anodized with a beautiful finish. Mounting hardware is also included...$1699 -
GPM-RUS030-GGPM Green Aluminum Rear Shock Tower fits 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Green Aluminum Rear Shock Tower for Traxxas electric Stampede 2WD, Slash 2WD, Rustler 2WD, and Bandit vehicles. These are machined from 6061-T6 aluminum and anodized with a beautiful finish. Mounting hardware is also included...$2190 -
GPM-CRA038GC-GSGPM Gunmetal Aluminum Transmission Cover for 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Gunmetal Aluminum Transmission & Spur Gear Cover for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, and Bandit vehicles.This is a replacement for Traxxas part 3792.Accessory Part ForTraxxas 1/10 Monster Jam TrucksTraxxas...$1999 -
GPM-CRA028-ORGPM Orange Aluminum Front Shock Tower for 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Orange Aluminum Front Shock Tower for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, Bandit, and Nitro Stampede trucks.This is a direct replacement for the stock Traxxas part 3639 shock tower.Accessory Part ForTraxxas...$999 -
GPM-SLA102R/KITA-SGPM Alloy Rebuild Kit For SLA102R Rear Damper, Slash Rustler Stampede Bandit (Silver)
This is the GPM Alloy Rebuild Kit For SLA102R Rear Damper, Slash Rustler Stampede Bandit (Silver)Includes:Spacer-2pcsLower Mount-2pcsDamper Rod +Ballend-2pcs4x2 White Silicon O-Ring-4pcs11x1.5 Black O-Ring-2pcsReplacement Part For:Slash 4x4Rustler...$1990 -
GPM-SLA102R/KITA-RGPM Alloy Rebuild Kit For SLA102R Rear Damper, Slash Rustler Stampede Bandit (Red)
This is the GPM Alloy Rebuild Kit For SLA102R Rear Damper, Slash Rustler Stampede Bandit (Red)Includes:Spacer-2pcsLower Mount-2pcsDamper Rod +Ballend-2pcs4x2 White Silicon O-Ring-4pcs11x1.5 Black O-Ring-2pcsReplacement Part For:Slash 4x4Rustler...$1990 -
GPM-SLA102R/KITA-ORGPM Alloy Rebuild Kit For SLA102R Rear Damper, Slash Rustler Stampede Bandit (Orange)
This is the GPM Alloy Rebuild Kit For SLA102R Rear Damper, Slash Rustler Stampede Bandit (Orange)Includes:Spacer-2pcsLower Mount-2pcsDamper Rod +Ballend-2pcs4x2 White Silicon O-Ring-4pcs11x1.5 Black O-Ring-2pcsReplacement Part For:Slash 4x4Rustler...$1990 -
GPM-SLA102R/KITA-GSGPM Alloy Rebuild Kit For SLA102R Rear Damper, Slash Rustler Stampede Bandit (Gray Silver)
This is the GPM Alloy Rebuild Kit For SLA102R Rear Damper, Slash Rustler Stampede Bandit (Gray Silver)Includes:Spacer-2pcsLower Mount-2pcsDamper Rod +Ballend-2pcs4x2 White Silicon O-Ring-4pcs11x1.5 Black O-Ring-2pcsReplacement Part For:Slash 4x4Rustler...$1990 -
GPM-SLA102R/KITA-GGPM Alloy Rebuild Kit For SLA102R Rear Damper, Slash Rustler Stampede Bandit (Green)
This is the GPM Alloy Rebuild Kit For SLA102R Rear Damper, Slash Rustler Stampede Bandit (Green)Includes:Spacer-2pcsLower Mount-2pcsDamper Rod +Ballend-2pcs4x2 White Silicon O-Ring-4pcs11x1.5 Black O-Ring-2pcsReplacement Part For:Slash 4x4Rustler...$1990 -
GPM-SLA102R/KITA-BKGPM Alloy Rebuild Kit For SLA102R Rear Damper, Slash Rustler Stampede Bandit (Black)
This is the GPM Alloy Rebuild Kit For SLA102R Rear Damper, Slash Rustler Stampede Bandit (Black)Includes:Spacer-2pcsLower Mount-2pcsDamper Rod +Ballend-2pcs4x2 White Silicon O-Ring-4pcs11x1.5 Black O-Ring-2pcsReplacement Part For:Slash 4x4Rustler...$1990 -
GPM-SLA102R/KITA-BGPM Alloy Rebuild Kit For SLA102R Rear Damper, Slash Rustler Stampede Bandit (Blue)
This is the GPM Alloy Rebuild Kit For SLA102R Rear Damper, Slash Rustler Stampede Bandit (Blue)Includes:Spacer-2pcsLower Mount-2pcsDamper Rod +Ballend-2pcs4x2 White Silicon O-Ring-4pcs11x1.5 Black O-Ring-2pcsReplacement Part For:Slash 4x4Rustler...$1990 -
GPM-SLA2W022-RGPM Red Aluminum Rear Stub Axle Carriers fits 2WD Stampede Rustler Slash Bandit
These are the GPM Racing Red Aluminum Rear Stub Axle Carriers for Traxxas electric Slash 2WD, Stampede 2WD, Rustler 2WD, and Bandit vehicles. Made of 6061-T6 aluminum with an anodized finish, these are durable and look awesome!These fit in place of...$1990 -
GPM-CRA038GC-BKGPM Black Aluminum Transmission Cover for 2WD Stampede Rustler Slash Bandit
This is the GPM Racing Black Aluminum Transmission & Spur Gear Cover for Traxxas electric Stampede 2WD, Rustler 2WD, Slash 2WD, and Bandit vehicles.This is a replacement for Traxxas part 3792.Accessory Part ForTraxxas 1/10 Monster Jam TrucksTraxxas...$1999 -
RRP8717Robinson Extra Hard 5mm Bore 17T Pinion 0.8 Mod (31.75P)
This is the Robinson Racing Extra Hard 17-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede 4x4, E-Revo Brushless, E-Maxx Brushless,...$849 -
GPM-XRTM051FAN-RGPM Red 6061-T6 Alloy Esc High Speed Cooling Fan 20000 RPM (BL-2S: 3383 and Velineon VXL-3S: 3355R)
This is the GPM Red 6061-T6 Alloy Esc High Speed Cooling Fan 20000 RPM Assists with helping cool down the ESC. Designed to work with ESC models: (BL-2s: 3383) and (Velineon VXL-3s: 3355R) IncludesCooling Fan Base - 1PCSCooling Fan Cover - 1PCSCooling Fan...$1999