Slayer Pro 4x4

This is the replacement High Torque Waterproof Servo for the Traxxas E-Maxx (TRAC92**). FEATURES:Plastic waterproof blue case INCLUDES:One high torque waterproof servo with J style connector REQUIRES:Mounting in the E-Maxx SPECS:Length: 2.16"...

This is the Traxxas Engine Connecting Rod for TRX 2.5, 2.5R, and 3.3 Nitro Engines.FeaturesAluminum constructionPre-installed bushingSpecificationsLength: 37mm (1.46")Thickness: 3mm (0.12")Fits:Jato 3.3Nitro 4-TecNitro Rustler 2.5Nitro SlashRevo 2.5 & 3...

These are Traxxas 3x8mm Button Head Screws (6). Features: Black steel construction with hex headIncludes: Six screws Replacement part for these models1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 SummitBandit VXLBlastDrag Slash 1967 Chevrolet...

These are the replacement GTR Shock Retainers for the Traxxas Nitro Revo Monster Truck. FEATURES:Nylon ConstructionBlack in Color INCLUDES:Two Black Nylon GTR Shock CapsTwo Black Nylon GTR Spring AdjustersTwo Black Nylon GTR Spring RetainersTwo Black...

This is the Traxxas Machined Spiral Cut Front Differential Ring and Pinion Gear. These are used as an upgrade over the 5379X gears found in many vehicles. Spiral-cut 37-tooth ring and 13-tooth pinion front differential gear sets are CNC-machined from a...

This is the Traxxas High-Performance Vented Brake Disc for Revo, Slayer, and T-Maxx 3.3 trucks. The vented design dissipates heat better for stronger, more consistent braking throughout a run.FeaturesSteel construction, silver in colorTrue vented design...

This is a package of six Traxxas 4x12mm Button-Head Hex Machine Screws. Replacement part for these modelsDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0E-Revo VXL BrushlessFord F-150 RaptorFord Fiesta ST RallyHoss 4X4...

These are the Traxxas 3x10mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used across many of the Traxxas vehicles.Fits1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 Rally1/10 Summit1/16 E-Revo Brushed1/16 E-Revo VXL...

This is a package of six 3x12mm Traxxas Countersunk Hex Head Screws. Features:Steel constructionBlack in colorUsed on the Traxxas Revo monster truck, can also be used in any application where a 3x12mm countersunk screw is required Includes: Six 3x12mm...

This is a package of Traxxas Large Rod Ends and Hollow Balls for the Revo 2.5 and 3.3 trucks.  There are 12 rod ends and hollow balls per package. FEATURES:Plastic constructionBlack in colorMetal Pivot Balls INCLUDES:12 Rod Ends12...

This is the GPM Racing Green Aluminum Rear Body Post Mount Set for Traxxas 1/10 E-Revo 2.0, E-Revo Brushed & Brushless, Revo 3.3, Slayer, and Summit trucks. Made of 6061-T6 aluminum, this mount is super tough and looks stunning with its anodized...

These are the Traxxas 3x20mm Buttonhead Hex Machine Screws. Each package includes six screws. These are used in many different Traxxas vehicles.Replacement part forBandit VXLDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.0Ford F-150...

These are Traxxas Wheel Hub Ball Bearings for the Revo, T-Maxx 3.3, E-Maxx, and other vehicles. Pair of 12x18x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction...

This is the Traxxas Updated Wire Harness for the EZ Start and EZ Start 2 Systems. This harness has the white connector that the EZ Start pack plugs into. Features: Extra long 12" wires Pre-installed connectors and eyelets Includes:One wire harnessOne...

This is a set of four Traxxas Blue Aluminum 17mm Splined Wheel Nuts for the vehicles using the 17mm wheel hubs. Some of the vehicles are the Revo 3.3, E-Revo Brushless, T-Maxx 3.3, E-Maxx Brushless, Slayer Pro, Summit, and more. FEATURES: Aluminum...

This is the GPM Racing Green 6061-T6 Aluminum 90T Progressive-2 Front Rocker Arm Set for Traxxas 1/10 E-Revo, E-Revo 2.0, Summit, Revo 3.3, and Slayer Pro trucks.IncludesRocker Arm-2pcsStainless Steel Round Head Screw 3x16-2pcsStainless Steel Round Head...

This is a pair of Traxxas Axle Carriers for Revo 3.3, E-Revo, E-Maxx, T-Maxx, Summit, Slayer. These are for use with 6x13mm ball bearings, or use the included bearing adapters to run 6x12mm ball bearings.Includes:One Left Axle CarrierOne Right Axle...

This is the optional Differential Spool for the Traxxas Revo, TRAC71**. FEATURES:Constructed of steelInstalls in diff housing on either front or rear wheels INCLUDES:One Differential Spool for the Traxxas Revo with instruction sheet REQUIRES:Differential...

This is the replacement Fuel Tank Cap O-Rings for the Traxxas Revo model. FEATURES:Rubber construction, orange in color INCLUDES:Two rubber o-rings REQUIRES:Installing onto the fuel tank cap SPECS:Inside diameter: 18mmOutside diameter: 22mm

This is a Traxxas Front and Rear Body Mount Set for the Revo 2.5, 3.3, E-Revo, E-Revo Brushless, and Slayer trucks.  Included are the front and rear body mounts, front and rear body posts, and screws.

This is the GPM Racing Green Aluminum Front Body Mount Set for Traxxas 1/10 E-Revo 2.0, E-Revo Brushed & Brushless, Revo 3.3, Slayer, and Summit trucks. Made of 6061-T6 aluminum, this mount is super tough and looks stunning with its anodized finish...

This is the GPM Racing Blue 6061-T6 Aluminum 90T Progressive-2 Front Rocker Arm Set for Traxxas 1/10 E-Revo, E-Revo 2.0, Summit, Revo 3.3, and Slayer Pro trucks.IncludesRocker Arm-2pcsStainless Steel Round Head Screw 3x16-2pcsStainless Steel Round Head...

This is the Traxxas TRX 3.3 Engine Wrist Pin with Wrist Pin Clips. This is a replacement wrist pin for the 3.3 engine in vehicles like the Jato 3.3, Nitro 4-Tec, Nitro Slash, Revo 3.3, Slayer Pro, and T-Maxx 3.3.

This is a package of six Traxxas 4x6mm Button-Head Hex Machine Screws with ThreadlockFits:1/10 E-Revo Brushed1/10 E-Revo Brushless1/10 SummitRevo 3.3SlayerSlayer Pro

These are the Traxxas Blue Aluminum 17mm Splined Wheel Hubs and Nuts for vehicles such as the T-Maxx 3.3, Revo 3.3, E-Revo Brushless, E-Maxx Brushless, Summit, Slayer Pro, and others.Newly designed 17mm racing hubs and wheel nuts incorporate new...

This is a package of three Air Filter Foam Inserts for the Traxxas 2.5 engine. FEATURES:Constructed of foam and pre-oiled to trap dirt INCLUDES:Three Air FIlter Inserts for the Traxxas 2.5 engine REQUIRES:Installing in air filter boot on...

These are Traxxas 3x30mm Button Head Screws (6). Features: Steel construction Black in color Button head design Includes: Six 3x30mm button head screws Specifications:Length: 1-3/16" (30mm)Diameter: 1/8" (3mm)

This is a Complete Control Box for the Easy Start 2 on the Traxxas Tmaxx. This houses the 7.2V battery for the Easy Start, and provides the start button. Also for the Tmaxx 3.3. FEATURES Black plastic construction Green motor and glow plug...

This is a Two-Speed Close Ratio Gear Set for the Traxxas Revo transmission. These parts are located in the center transmission. FEATURES:White plastic construction INCLUDES:One 40T 2nd speed gearOne 13T/16T input gearOne screw pin REQUIRES:Installation...

This is a pair of Traxxas 5x10x4mm ball bearings.  These are used in the clutch bells of many of the Traxxas vehicles. FeaturesThe bearings are constructed of stainless steel Includes2- Bearings Specs5x10x4mm

This is a pack of Traxxas Black 90-Degree Angled Body Mounting Clips (10 clips).  The angled design helps make it easier to remove and install them from the body posts. These can be used as clips on numerous vehicles for the body and other places...

This is the Hot Racing Aluminum Rear Body Post Mount for the Traxxas 1/10 E-Revo, E-Revo 2.0, Revo 3.3, Slayer Pro, and 1/10 Summit trucks.This is an upgrade to the rear mount in Traxxas part 5314.Features- CNC Machined 6061 aluminum construction-...

This is the Hot Racing Aluminum Front Body Post Mount for Traxxas 1/10 E-Revo, E-Revo 2.0, Revo 3.3, Slayer Pro, and 1/10 Summit trucks.This upgrade fits in place of the front body mount in Traxxas part 5314FeaturesCNC Machined 6061 aluminum...

This is the Traxxas Curved Tip Heavy Duty Body Scissors for cutting and trimming polycarbonate RC bodies. To do a good job on a custom body, the right tools are a must. Having both a curved tip and straight tip (Traxxas part TRA3431) scissors in your...

This is the Traxxas Straight Tip Heavy Duty Body Scissors for cutting and trimming polycarbonate RC bodies. To do a good job on a custom body, the right tools are a must. Having both a straight tip and curved tip (Traxxas part TRA3432) scissors in your...

These are the Traxxas 90-Degree Body Clips. These are a smaller size, typically used to hold down receiver covers, battery hold-downs, bodies on smaller trucks, etc.FeaturesMetal ConstructionSilver in ColorBent for Easy RemovalIncludesTen Bent Silver...

This is the Traxxas Standard Size Body Clips (12) - Standard-duty body clips   Replacement part for1/16 E-Revo VXL1/16 E-Revo1/16 Slash 4WD1/16 SummitBandit VXLBanditBIGFOOTJatoNitro RustlerRevoRustler VXLRustlerSlayer Pro 4X4Stampede...

This is a package of 5mm Flanged Nylon Locking Nuts from Traxxas. FEATURES:Constructed of steel with serrated flange area for sure gripNylon insert INCLUDES:Eight 5mm Flanged Nylon Locking Nuts REQUIRES:8mm nut drivers SPECS:Hex Size: 8mmInner Diameter:...

This is a package of Traxxas Large Rod Ends for the Rear Toe Link for the Revo 2.5 and 3.3.  These can be broken easily if you run your truck on anything but smooth ground.  It is a good idea to have spares on hand.

This is an O-Ring and Seal Set for the TRX 2.5 Engine. FEATURES Complete seal and ring set. Black, blue and red rubber construction. Brass ring installation tools. INCLUDESTwo brass ring installation tools.One blue rubber carburetor level seal.Two...