Nitro 4-Tec

This is the Traxxas replacement piston and sleeve for the TRX Pro .15 engines. Features: ABC (Aluminum piston with a Brass sleeve or liner that is Chrome plated) Matched set with oil ring Includes:1 Piston1 Sleeve (liner)

These are Traxxas 3x10mm Hex Screws (6). Features: Steel construction cap head with hexagon socket drive insert Metal lock washers Includes:(6) Screws(6) Lock Washers(1) Hex Wrench Specifications:Screws:Diameter: 3mmLength: 10mm Lock Washers:Inner...

This is the Traxxas Plastic Washers,Wht: ST, RU, BA(6)

This is a pair of Traxxas 5x10x4mm Blue Rubber-Sealed Ball Bearings. These are used on vehicles like the 1/10 E-Revo, Revo 3.3, T-Maxx, Slayer, as well as other vehicles.FeaturesMetal bearing constructionBlue rubber dirt shieldsIncludes: (2) 5X10mm ball...

This is the Traxxas Bellcrank Bushings (Plastic) set (5x8x2.5mm) (4) Includes: Set of four 5x8x2.5 mm bellcrank bushings

These are hardened steel drive yokes for the Traxxas Rustler and Stampede. FEATURES:Hardened steel construction and is stronger than stock parts.These yokes also come with U-Joints pre-installed for ease of installation. INCLUDES:Two hardened steel yokes...

This is a Package of Replacement Cush-Drive Elements for the EZ Start 2 System. FEATURES:Black plastic construction INCLUDES:Four cush-drive elements REQUIRES:The remainder of the EZ Start 2 system. SPECS:Length: 6mm (0.24")

This is a Traxxas TRX 2.5 and 2.5R Piston and Sleeve kit.  If you have several gallons of fuel through your engine, it may be time for a new piston and sleeve.  It is a direct replacement.  Included are one piston, one...

This is the Traxxas Universal Glow Plug Wrench Glow plug wrench (Universal wrench) Accessory Part ForJato 3.3Nitro RustlerNitro SlashRevo 3.3 Slayer Pro 4x4T-Maxx 3.3T-Maxx Classis

This is the Traxxas Nitro 4-Tec Pro Decal Sheet Sheet of pre-cut adhesive Nitro 4-Tec decals

This is a set of six Traxxas 4mm Grub / Set Screws with Threadlock. Set of six 4 mm set screws (grub screws) with threadlock Replacement Part ForE-Revo VXL BrushlessJatoNitro SlashRevoSlayer Pro 4X4SummitT-MaxxTRX 2.5RTRX 3.3

This is a set of four Traxxas 3x10mm Flat-Head Hex Drive Machine Screws. Set of four 3x10 mm flat-head machine screws with hex drive headsReplacement Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD ChassisChevrolet Corvette StingrayDrag SlashFactory Five...

This is a set of Traxxas Threaded Rods (20mm, 25mm, & 44mm), and a 12mm Set Screw.Includes20mm Threaded Rod25mm Threaded Rod44mm Threaded Rod12mm Set Screw Replacement Part ForBandit VXLBanditBIGFOOT No. 1 Officially Licensed ReplicaFord F-150 Raptor...

This is the Traxxas Rubber Exhaust pipe Rubber exhaust pipe for Nitro Rustler, Nitro Sport, and Nitro 4-Tec. (Side Exhaust Engines Only) Replacement Part ForTRX Pro .15Nitro Rustler Nitro Sport Nitro 4-Tec

This is the Traxxas aluminum (Red Anodized Shock Caps Shock caps, aluminum (Red-anodized) (4) (fits all Ultra Shocks)Aluminum shock caps are great way to boost the durability and style of any Traxxas vehicle equipped with Ultra Shocks. The machined caps...

This is the Traxxas aluminum (Orange Anodized Shock Caps Shock caps, aluminum (orange-anodized) (4) (fits all Ultra Shocks)Aluminum shock caps are great way to boost the durability and style of any Traxxas vehicle equipped with Ultra Shocks. The machined...

These durable Traxxas 2.0 mesh wheels for the Nitro 4-Tec fit all popular on-road touring sedans. They come with superb pre-glued racing tires with contoured molded foam inserts. Their lower profile increases sidewall strength and contact patch. The...

This is the Replacement Complete Gear Set for the EZ Start 2 System. The EZ Start 2 system is used on the Traxxas T-Maxx 2.5. FEATURES:White plastic gears INCLUDES:Eight different gearsOne metal 4mm sleeveOne 5x12.5mm shaft REQUIRES:The remainder of the...

This is the Traxxas Fuel Filler Bottle (500cc) The fuel bottle holds 500 cc of fuel and includes a long, bent, blue-anodized spout for easy filling. A rubber cap and O-ring seal make it possible to temporarily store fuel in the bottle (fuel bottles are...

This is the Traxxas Racing Sponsors Decal Sheet Dress up your model’s body with the Traxxas Racing Sponsor Decal Sheet. The decal sheet includes over 25 different full-scale sponsors including, NOS, K&N, Mechanix Wear, Holley, and Hooker...

This is the Traxxas RC Car/Truck Carrier Backpack Features Thick, Weather-Resistant Nylon Fabric Heavy Duty Zippers and Stitching Large Zippered Front Pockets for Tools and Parts Four-Compartment Battery Organizers Thick Padded Sidewalls Large Side...

This is the Traxxas Medium RC Car/Truck Duffle Bag Features Perfect for 1/10 and 1/8 Scale Models Thick, Weather-Resistant Nylon Fabric Heavy Duty Zippers and Stitching Large Outer Pockets for Tools, Parts, and Chargers Reinforced Carry Handles Padded...

This is the Traxxas Shoulder Strap for the #9917 Duffle Bag Add additional carrying support with the strap for your RC Car/Truck Duffle Bag Features Heavy Duty Shoulder Strap for Fuffel Bag with Metal Latches Padded Sleeve For Added Comfort Adjustable...

This is the Traxxas Official Team Traxxas Racing Decal Set (Flag Logo/ 6-color) The official Team Traxxas Racing Decal sheet has been revised and now includes EZ-Start, Stinger Motors, ProGraphix, TRX engines and www.Traxxas.com logos. Perfect for adding...

This is the RPM Body Skid Rails - fits most 1/5 - 1/12 bodies These Body Skid Rails will fit nearly any scale R/C car or truck. The only requirements are, the surface must be featureless, flat or curved and have a minimum of at least 3" (76.2mm) of open...

This is the Pro-Line RC Track Bag with Tool Holder Show up to the races in Style with Pro-Line’s Track Bag! The bag features luggage quality zippers. The bag is supported by an inner corrugated plastic housing that protects your stuff and holds the...

This is the Rage RC Black Large Gear Bag The Rage R/C Large Gear Bag will fit a 1/8 buggy, drone, truck or boat; and will keep the model safe and your automobile interior clean after a day at the pond, field, trail or track. The bag features a zip top...

This is the Traxxas Body Reamer Cap The Traxxas body reamer is a finely-honed cutting instrument. Protect your reamer's cutting surface with this replacement aluminum cap.

This is a set of Traxxas Red Aluminum 4mm Flanged Serrated Nuts (4).  These are used as wheel nuts and lock nuts on many Traxxas models. Accessory part forDrag Slash 1967 Chevrolet C10 TruckDrag Slash Ford Mustang 5.01/16 E-Revo VXL1/16 E-Revo1/16...

This is the Traxxas Telemetry Expander and GPS Module 2.0 Combo Set.  Upgrade your Traxxas vehicle with this set for precision telemetry data with easy setup. This set must be used with Traxxas TQi radio systems and the #6533 TSM receiver. Expanded...

This is the Traxxas Telemetry GPS Module 2.0.  For real-time, ultra-precise speed data, the GPS Module 2.0 is the answer. Real-Time SpeedStandard telemetry sensors use your vehicle’s gear ratio and tire size to calculate speed based on RPM...

This is the Traxxas Telemetry Expander 2.0.  Compatible with TQi transmitters and vehicles equipped with a 6533 TSM receiver, the Telemetry Expander 2.0 is a the best option for advanced data communication. Expanded InnovationTraxxas telemetry...

This is the Traxxas Mount, telemetry expander (fits Funny Car, Nitro 4-Tec). This is Traxxas part number 6558Part Number: 6558 / TRA6558FitsFunny CarNitro 4-TecMore detail coming soon! Please check your vehicle manual to confirm vehicle fitment, or...

This is the Traxxas TRX 2.5 & 3.3 Low-Speed Needle with 2x1mm O-rings (2). This works in Traxxas 2.5 and 3.3 engines.For use with TRX 2.5 & 3.3 engines used in:Nitro 4-TecNitro RustlerNitro SlashJato 2.5 & 3.3Revo 2.5 & 3.3T-Maxx 2.5 & 3.3

This is a set of replacement Traxxas Engine Ball Bearings for the TRX 3.3, 2.5R, and 2.5 Engines. This includes one 7x17x5mm and one 12x21x5mm engine bearing. These engines have been used in many of the Traxxas nitro vehicles.SpecificationsFront...

This is the Traxxas 2071 Servo Case Set for the 2070 digital servo.This has been used in vehicles such as:Bandit VXLNitro 4-TecRustler VXLStampede VXL 2WDT-Maxx 3.3

This is the Traxxas planet & Sungears, Shaft: N, NB, NRU,SLH Replacement hardened-steel internal gears for 2381X differential. Includes planetary gears (4), planetary shafts (4), sun gears (2), and alignment shaft.

This is the Traxxas Jato Low RPM Resonator Tuned Pipe This single-chamber Resonator aluminum tuned pipe is precision-engineered on the dyno to increase the low to mid-RPM power output of TRX Racing Engines. Resonator pipes feature R.O.A.R. legal stingers...

These bearings may be used with Traxxas vehicles or on whatever vehicle they will fit. PACKAGE INCLUDES:2-Bearings SPECS:5x8x2.5mm FEATURES:The bearing are constructed of stainless steel Replacement part for4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL AWD...

This is the replacement Starter Shaft for the T-MAXX 2.5 engine. FEATURES:Steel Construction INCLUDES:One shaft REQUIRES:Traxxas 2.5 T-MAXX engine SPECS:Length: 25.4 mm (1")Diameter: 18.2 mm (0.716") COMMENTS:If the oneway bearing is needed, use...