Jato 4x4 VXL

This Combo Includes:Traxxas Jato 4X4 VXL BuggyEZ-Peak Plus 4s ID LiPo Charger14.8V 4S 5000mAh LiPo Battery This is the Jato 4X4 VXL 1/8 scale 4WD Brushless Buggy. Fully assembled, Ready-To-Race, with with Factory-Installed Extreme HD Kit, Waterproof...

This is the Jato 4X4 VXL 1/8 scale 4WD Brushless Buggy. Fully assembled, Ready-To-Race, with with Factory-Installed Extreme HD Kit, Waterproof Electronics, TQi 2.4 GHz 2-Channel Radio System, VXL-4s Speed Control, Velineon 540XL Brushless Motor, and...

This is the Traxxas EZ-Peak Dual iD 100W LiPo and NiMH charger. It will charge two 2S-3S LiPo, and 5-8 cell NiMH battery packs. The EZ-Peak Dual charger works with both iD batteries, and standard LiPo or NiMH with Traxxas high-current connectors. Charge...

This is the Traxxas EZ-Peak Plus 4-Amp Auto-iD LiPo and NiMH Charger. It will charge 2S-3S LiPo, and 5-8 cell NiMH battery packs. The EZ-Peak Plus 4-Amp charger works with the Traxxas iD style battery plugs, as well as the Traxxas high-current plug. It...

This is the Traxxas EZ-Peak Live Dual iD 200-Watt Charger for LiPo and NiMH batteries. The new EZ Peak Live Dual Output iD Charger is the most advanced, most powerful charger ever from Traxxas! As with other EZ Peak iD chargers, these are compatible with...

This is the Traxxas Tool Set with Carrying Case. This is the must-have set for all Traxxas owners. It comes with a six Allen/Hex drivers, five nut drivers, three Phillips head screwdrivers, three flat-head screw drivers, and an dual-end open-ended...

This is a 2 pack of 5X11mm Ball Bearings  Pair of 5x11x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction. FEATURES:Metal bearing constructionBlue rubber dirt...

This is the Traxxas EZ-Peak Plus 4s, 8-Amp Auto-iD NiMH/LiPo with iD Auto Battery Identification Charger. With up to 8-amps of output it will charge 2S-4S LiPo, and 5-8 cell NiMH battery packs. The EZ-Peak Plus 4s, 8-Amp charger works with the Traxxas iD...

This is the Traxxas EZ-Peak Live 12-Amp ID Charger. With up to 12-amps of output and the ability to operate the charger via Bluetooth from your iOS or Android device, this is the most powerful, most advanced charger ever from Traxxas!Traxxas iD...

This is the Traxxas TQi 2.4GHz 5-Channel Micro Receiver with Telemetry and TSM The 6533 TQi 2.4 GHz receiver stores up to thirty Traxxas Link enabled transmitters in memory. Integrated telemetry ports allow real-time data to transmit from your Traxxas...

This is Silicone grease that is used throughout most all of the Traxxas kits, it can also be used in most any R/C greasing application.  (1- tube of grease approximately 1 oz.)

This is the Traxxas Battery hold-down, tall (1)/ hold-down retainer, front & rear (1 each) (allows for installation of taller, multi-cell batteries)Extended battery hold-down with front and rear retainers accommodates taller batteries on vehicles...

This is a package of replacement Traxxas 5x8mm Teflon Washers  Set of 20 PTFE-coated 5x8x0.5 mm washers for use with bearings. FEATURES:Black teflon construction.Used on the axles and in the transmission. INCLUDES: Set of 20 PTFE-coated 5x8x0.5 mm...

This is the Traxxas TQi Transmitter Traxxas Link Enabled 2.4GHz High Output 3-Channel (Transmitter Only) TransmitterTQi Traxxas Link enabled, 2.4GHz high output, 3-channel

This is the Diff Carrier/Gasket Set Replacement differential carrier includes X-ring gaskets (2), ring gear gasket, and 6x10x0.5 mm washer. FEATURES:Plastic Diff CarrierBlue Rubber Shaft GasketsBlack Rubber Diff Carrier GasketsGray Teflon...

This is the Diff Oil Kit for the Revo by Traxxas. Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential by using higher or lower viscosity oil. Depending on the track conditions,...

This is the Traxxas Antenna Cap Set with Antenna Spool. The antenna spool is used for wrapping excess antenna wire before inserting it in the antenna tube to prevent wire from hanging out the end of the tube, preventing damaged antenna wires caused by...

This is a set of Traxxas 10x15mm Ball Bearings for use on the Traxxas Revo and other vehicles. Features: Steel Construction Shielded with blue rubber seals Includes: Two Ball Bearings Specifications:Inner Diameter: 10mmOuter Diameter: 15mmSide...

This is a Tube of White Lithium Grease from Traxxas. This product can be used to lubricate parts, such as gears. FEATURES Great lubrication for nylon gears INCLUDESOne tube of lithium grease (volume unknown) REQUIRESApplication to parts needing...

This is the Traxxas Front 37T Differential Ring and 13T Pinion Gear 37-tooth ring and 13-tooth pinion gears for front differentials. Replacement Part ForFord Fiesta ST RallyFord F-150 Raptor R 4X4Ford Fiesta ST Rally BrushlessFord Fiesta ST RallyHoss 4X4...

This is the Traxxas Differential ring gear, pinion gear, (machined spiral cut) (rear) Spiral-cut 37-tooth ring and 13-tooth pinion differential gear sets are CNC-machined from a solid block of steel. The teeth are cut with a slight curve to minimize...

This is a set of four Traxxas 17mm Splined Serrated red-aluminum Wheel Nuts for use on the X-Maxx and E-Revo 2.0 monster trucks. Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug no matter how intense the action gets...

This is a Pair of 10x15x4 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal bearings offer an even tighter seal for ultimate protection and less maintenance in dirty environments.Includes: Two 10x15mm Ball...

This is a package of six 3x6mm Traxxas Button Head Screws. Features: Steel construction Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a 3x6mm button head screw is required Includes: Six...

This is a set of four Traxxas 17mm Splined Serrated orange-aluminum Wheel Nuts for use on the X-Maxx and E-Revo 2.0 monster trucks. Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug no matter how intense the action...

This is the Traxxas Differential, rear (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash, Stampede, Rustler) (13/37 ratio)The Pro-BUILT 4X4 rear differential comes professionally assembled for easy...

This is the Traxxas Differential, front (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash, Stampede, Rustler) (13/37 ratio)The Pro-BUILT 4X4 front differential comes professionally assembled for easy...

This is the Traxxas Complete Transmission for 1/10 2WD Rustler, Bandit, Stampede, and Slash trucks.  This comes pre-assembled with internal gears, slipper clutch, and spur gears, making for an ultra-simply swap to get you back out racing or bashing...

This is the Traxxas Rear Ring and Pinion Differential Gears for the Slash 4x4, Hoss 4x4, Stampede 4x4, Telluride, 1/10 Rally, and XO-1 vehicles. 37-tooth ring and 13-tooth pinion gears for rear differentials Includes:One Rear Differential Ring GearOne...

This is a pair of Traxxas 6x12mm Ball Bearings with Rubber Dirt Shields. Pair of 6x12x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction...

This is the Traxxas Differential Gear Set for the Slash 4x4, Stampede 4x4, 1/10 Rally, XO-1, and Telluride vehicles. These feature hardened steel construction.INCLUDES:Two Output GearsTwo Spider GearsOne Spider Gear ShaftOne Carrier Support Replacement...

This is a pair of Traxxas 8x16x5mm Ball Bearings.  These are replacements for the differential bearings in the Revo and other vehicles. Features: Stainless Construction Blue Rubber Sealed Includes: Two 8mm x 16mm Rubber Sealed...

This is the Traxxas LiPo cell voltage checker and balancer with the #2938X adapter for use with Traxxas iD batteries. This can be used to check cell voltages on 2S, 3S, and 4S Traxxas ID LiPo batteries, and also to equalize the battery pack cells if...

This is the Traxxas Machined Spiral Cut Front Differential Ring and Pinion Gear. These are used as an upgrade over the 5379X gears found in many vehicles. Spiral-cut 37-tooth ring and 13-tooth pinion front differential gear sets are CNC-machined from a...

These are the 3x6mm Flathead Machine Screws from Traxxas.FeaturesSteel constructionBlack in colorIncludesSix 3x6mm Flathead Machine ScrewsSpecificationsLength: 6mmDiameter: 3mm

These are Traxxas Wheel Hub Ball Bearings for the Revo, T-Maxx 3.3, E-Maxx, and other vehicles. Pair of 12x18x4 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance, smoother running and less friction...

This is the Traxxas 3.0" Gray Wheels with Belted Sledgehammer Tires (2) Tires & wheels, assembled, glued (3.0" gray wheels, Sledgehammer belted tires, foam inserts) (2) Replacement Part ForJato 4x4 VXL

This is the Traxxas Sway Bar Kit (Front and Rear) with Adjustable Linkage Sway bars are a powerful tool to change up the handling of your Jato 4X4. Sway bars allow you to dial in more or less understeer depending on the type of terrain and the level of...

This is the Front Differential Housing FEATURES Hardened plastic construction Black in color INCLUDESTwo front differential housing halves REQUIRESInstallation around assembled differential components

This is the Traxxas Orange Aluminum Stub Axle Carriers (Left & Right) Carriers, stub axle, rear, 6061-T6 aluminum, left & right (orange-anodized) (for use with #9080 upgrade kit) Accessory Part For BIGFOOT 4X4 BL-2sFord Fiesta ST Rally BL-2sFord...