Traxxas

LIMITED TIME OFFER - FREE TRAXXAS BATTERY AND CHARGER - $59.95 Value INCLUDED FREE ITEMS TRA2827X - 3000mAh 7.4v 2-CELL LIPO BATTERYTRA2920 - USB-C 2s LIPO iD CHARGER This is the Traxxas Jato 4X4...

This Combo Includes:Traxxas Jato 4X4 BL-2s Racing BuggyEZ-Peak ID LiPo Charger7.4V 2S 5800mAh LiPo Battery This is the Traxxas Jato 4X4 Brushless Ready-to-Run Waterproof Radio Controlled 1/8 Scale...

This is the Traxxas Jato 4X4 Brushless Ready-to-Run Waterproof Radio Controlled 1/8 Scale Racing Buggy with Factory-Installed Extreme HD Kit, with TQ 2.4 GHz 2-Channel Radio System, BL-2s Speed...

This is the Traxxas EZ-Peak Dual iD 100W LiPo and NiMH charger. It will charge two 2S-3S LiPo, and 5-8 cell NiMH battery packs. The EZ-Peak Dual charger works with both iD batteries, and standard...

This is the Traxxas EZ-Peak Plus 4-Amp Auto-iD LiPo and NiMH Charger. It will charge 2S-3S LiPo, and 5-8 cell NiMH battery packs. The EZ-Peak Plus 4-Amp charger works with the Traxxas iD style...

This is the Traxxas EZ-Peak Live Dual iD 200-Watt Charger for LiPo and NiMH batteries. The new EZ Peak Live Dual Output iD Charger is the most advanced, most powerful charger ever from Traxxas! As...

This is the Traxxas Tool Set with Carrying Case. This is the must-have set for all Traxxas owners. It comes with a six Allen/Hex drivers, five nut drivers, three Phillips head screwdrivers, three...

This is the Traxxas EZ-Peak Plus 4s, 8-Amp Auto-iD NiMH/LiPo with iD Auto Battery Identification Charger. With up to 8-amps of output it will charge 2S-4S LiPo, and 5-8 cell NiMH battery packs. The...

This is the Traxxas EZ-Peak Live 12-Amp ID Charger. With up to 12-amps of output and the ability to operate the charger via Bluetooth from your iOS or Android device, this is the most powerful, most...

This is Silicone grease that is used throughout most all of the Traxxas kits, it can also be used in most any R/C greasing application.  (1- tube of grease approximately 1 oz.)

This is the Traxxas Battery hold-down, tall (1)/ hold-down retainer, front & rear (1 each) (allows for installation of taller, multi-cell batteries)Extended battery hold-down with front and rear...

This is the Traxxas TQi Transmitter Traxxas Link Enabled 2.4GHz High Output 3-Channel (Transmitter Only) TransmitterTQi Traxxas Link enabled, 2.4GHz high output, 3-channel

This is the Diff Carrier/Gasket Set Replacement differential carrier includes X-ring gaskets (2), ring gear gasket, and 6x10x0.5 mm washer. FEATURES:Plastic Diff CarrierBlue Rubber Shaft GasketsBlack...

This is the Diff Oil Kit for the Revo by Traxxas. Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential by using higher or lower...

This is the Traxxas Alloy Slipper Pressure Plate and Hub for the Revo 2.5, 3.3, E-Revo, E-Revo Brushless, E-Maxx 16.8V, and E-Maxx Brushless trucks. These are part of the slipper assembly.

This is the Traxxas Rear Center Drive Hub and Set Screw for 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, Rally, Telluride, and XO-1 vehicles. Rear center drive hub with 4x3 mm grub screw.

This is a Tube of White Lithium Grease from Traxxas. This product can be used to lubricate parts, such as gears. FEATURES Great lubrication for nylon gears INCLUDESOne tube of lithium grease...

This is the Traxxas Front 37T Differential Ring and 13T Pinion Gear 37-tooth ring and 13-tooth pinion gears for front differentials. Replacement Part ForFord Fiesta ST RallyFord F-150 Raptor R...

This is the Traxxas Differential ring gear, pinion gear, (machined spiral cut) (rear) Spiral-cut 37-tooth ring and 13-tooth pinion differential gear sets are CNC-machined from a solid block of steel...

This is a set of four Traxxas 17mm Splined Serrated red-aluminum Wheel Nuts for use on the X-Maxx and E-Revo 2.0 monster trucks. Set of four 17 mm wheel nuts are serrated for extra bite on the wheel...

This is the Traxxas Cover, gear (clear) The crystal-clear plastic gear cover is just as durable as the stock cover, but lets you see the gear mesh for easy, no-tool inspection. Also an accessory for...

This is a package of six 3x6mm Traxxas Button Head Screws. Features: Steel construction Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a 3x6mm...

This is the Traxxas Velineon VXL-4s Brushless Electronic Waterproof Speed Control - (Fwd/Rev/Brake) The 3440 Velineon 4s brushless power system takes your RC experience to the extreme. New...

This is a set of four Traxxas 17mm Splined Serrated orange-aluminum Wheel Nuts for use on the X-Maxx and E-Revo 2.0 monster trucks. Set of four 17 mm wheel nuts are serrated for extra bite on the...

This is the Traxxas Differential, rear (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash, Stampede, Rustler) (13/37 ratio)The Pro-BUILT 4X4 rear...

This is the Traxxas Differential, front (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash, Stampede, Rustler) (13/37 ratio)The Pro-BUILT 4X4...

This is the Traxxas Complete Transmission for 1/10 2WD Rustler, Bandit, Stampede, and Slash trucks.  This comes pre-assembled with internal gears, slipper clutch, and spur gears, making for an...

This is the Traxxas Velineon 540XL Brushless 2400Kv 70mm Motor (Assembled with 6.5mm Gold-Plated Bullet Connectors) (Not for use in Marine Models) The Velineon 540XL brushless motor delivers massive...

This is the Traxxas Rear Ring and Pinion Differential Gears for the Slash 4x4, Hoss 4x4, Stampede 4x4, Telluride, 1/10 Rally, and XO-1 vehicles. 37-tooth ring and 13-tooth pinion gears for rear...

This is the Traxxas Differential Gear Set for the Slash 4x4, Stampede 4x4, 1/10 Rally, XO-1, and Telluride vehicles. These feature hardened steel construction.INCLUDES:Two Output GearsTwo Spider...

This is the Traxxas Center Driveshaft 6061-T6 aluminum (blue-anodized) (214mm) Traxxas designed this one-piece driveshaft out of tough 6061-T6 aluminum to be both strong and lightweight. Internal...

This is the Traxxas LiPo cell voltage checker and balancer with the #2938X adapter for use with Traxxas iD batteries. This can be used to check cell voltages on 2S, 3S, and 4S Traxxas ID LiPo...

This is the Traxxas Machined Spiral Cut Front Differential Ring and Pinion Gear. These are used as an upgrade over the 5379X gears found in many vehicles. Spiral-cut 37-tooth ring and 13-tooth pinion...

These are the 3x6mm Flathead Machine Screws from Traxxas.FeaturesSteel constructionBlack in colorIncludesSix 3x6mm Flathead Machine ScrewsSpecificationsLength: 6mmDiameter: 3mm

Traxxas Splined 17mm Wheel Nuts (blue-anodized) (4) This set of four 17 mm blue aluminum wheel nuts is beautiful anodized for eye-catching looks with Traxxas-tough durability.

This is the Traxxas Sway Bar Kit (Front and Rear) with Adjustable Linkage Sway bars are a powerful tool to change up the handling of your Jato 4X4. Sway bars allow you to dial in more or less...

This is the Front Differential Housing FEATURES Hardened plastic construction Black in color INCLUDESTwo front differential housing halves REQUIRESInstallation around assembled differential...

This is the Traxxas Hardened Steel Front Center Drive Hub and Screw Pin for 1/10 Slash 4x4, Rustler 4x4, Stampede 4x4, Rally, and XO-1 vehicles. The replacement hardened-steel drive hub connects your...

This is the Traxxas Orange Aluminum Stub Axle Carriers (Left & Right) Carriers, stub axle, rear, 6061-T6 aluminum, left & right (orange-anodized) (for use with #9080 upgrade kit) Accessory...

This is the Traxxas Red Aluminum Stub Axle Carriers (Left & Right) Carriers, stub axle, rear, 6061-T6 aluminum, left & right (red-anodized) (for use with #9080 upgrade kit) Accessory Part For...