Traxxas

This is the Traxxas 6061-T6 Aluminum (Blue-Anodized) Gear Cover Add strength and style to your Maxx Slash with this aluminum gear cover. The gear cover is machined from tough 6061-T6 aluminum for...

This is the Traxxas 6061-T6 Aluminum (Orange-Anodized) Gear Cover Add strength and style to your Maxx Slash with this aluminum gear cover. The gear cover is machined from tough 6061-T6 aluminum for...

This is the Traxxas (1979) Ford F-150 Clear Body with Accessories (Includes grille, side mirrors, door handles, windshield wipers) From mild to wild, Traxxas clear bodies are your own personal canvas...

This is the Traxxas TRX-4m 6061-T6 Aluminum (Black-Anodized) 1″ Beadlock Wheels Take your TRX-4M to the next level with these black-anodized aluminum beadlock wheels. Made from tough 6061-T6...

This is the Traxxas TRX-4m 6061-T6 Aluminum (Silver-Anodized) 1″ Beadlock Wheels Take your TRX-4M to the next level with these silver-anodized aluminum beadlock wheels. Made from tough 6061-T6...

This is the Traxxas Front Clipless Body Mount Adapter with Inserts Front clipless body mount adapter with inserts (2) Replacement Part ForFord F-150 Raptor R 4X4

This is the Traxxas Caster Blocks Left & Right (C-Hubs) These left and right caster blocks (C-hubs) were redesigned and beefed-up for XRT. Standard in XRT, they can be used to upgrade X-Maxx for...

This is the Traxxas Front or Rear Center Driveshafts Rebuild Kit (Steel Constant-Velocity) For #9655X steel CV driveshafts Rebuild kit for 9655X steel CV center driveshafts includes hardware to...

This is the Traxxas Center Assembled Driveshaft (Steel Constant-Velocity) Give your Sledge the ultimate driveline upgrade with these heavy-duty center CV (constant velocity) driveshafts. Made from...

This is a set of four Traxxas TRX-4 Black Aluminum 2.2" Beadlock Rings with 2x10 Capscrews (48) for use with Traxxas 2.2" Beadlock Wheels, such as the Method 105 wheels. Accessory Part ForTRX-4...

This is a set of four Traxxas TRX-4 Satin Aluminum 2.2" Beadlock Rings with 2x10 Capscrews (48) for use with Traxxas 2.2" Beadlock Wheels, such as the Method 105 wheels.Accessory Part ForTRX-4...

These are the Traxxas TRX-4 Rear Heavy Duty Chromoly Axles. These are for use with the TRA8065 machined rear portal input drive gears.Accessory Part ForTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land...

These are the Traxxas TRX-4 Front Heavy Duty Chromoly Left and Right Axle Shafts. These can only be used with the TRA8064 machined portal drive input gear.Accessory Part ForTRX-4 Crawler KitTRX-4...

This is the Traxxas E-Revo 2 Heavy-Duty Differential Carrier, Gaskets and Spacers. This includes the diff carrier, 2 X-ring gaskets, ring gear gasket, 4 spacers, and 12.2x18x0.5 washer.Stock...

These are the Traxxas Unlimited Desert Racer Planetary Gears (4).Stock Replacement OnUnlimited Desert Racer (UDR)

This is the Traxxas Unlimited Desert Racer Rigid Edition Body Decal Set.Stock Replacement OnUnlimited Desert Racer (UDR)

This is a set of four Traxxas Green Aluminum 5mm Flanged Serrated Nylon Locking Nuts Lightweight and great looking, these 5 mm anodized aluminum flanged lock nuts are the perfect finishing touch for...

These are the Traxxas TRX-4 Inner Fenders, Rock Light Covers, Battery Plate and 3x8 Screws (4). This is the stock set found on the TRX-4 Ford Bronco. Front and rear inner fenders for the TRX-4 with...

This is a pair of Traxxas TRX-4 White Stripe 0.30 Rate GTS Shock Springs (natural finish).Accessory Part ForTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land RoverTRX-4 Tactical

This is the Traxxas 4-Tec 2.0 Ford GT Blue Pre-Painted Body with Decals. This body is even pre-cut, making for quick final installation!Note: Tail lights, exhaust tips, & mounting hardware (Traxxas...

This is the Traxxas 4-Tec 2.0 Rear Bumper and Rear Body Mount Set. This is used on both the Ford GT and Mustang GT versions.Fits4-Tec 2.0

This is the Traxxas 4-Tec 2.0 Front Upper and Lower Bumper Set. This is used in both the Ford GT and Mustang GT version.Fits4-Tec 2.0

This is the Traxxas 4-Tec 2.0 Sealed Receiver Box, Cover, Servo Mount and Hardware. This fits both Ford GT and Mustang GT versions.IncludesSealed receiver boxSteering servo mountReceiver coverAccess...

This is the Traxxas 4-Tec 2.0 Front and Rear Body Mount Set, for use with #8311 series Ford GT bodies.Fits4-Tec 2.0

These are the Traxxas TRX-4 Crawler Left and Right Front Inner Portal Drive Housings and 2.5x4mm Screws (6).FitsTRX-4

This is a pair of Traxxas X-Maxx GTX Assembled 110mm Steel Shock Shafts with rod ends and hollow balls.FeaturesSteel construction with chrome finishComposite plastic rod ends and pressed-in ...

This is the Traxxas Caps and spring retainers, GTR long/xx-long shock (upper cap (2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2)). Replacement GTR shock...

This is the Traxxas Primary Shaft, 1st Speed Hub, and One-Way Bearing for Revo 3.3, Slayer, and T-Maxx 3.3 trucks.IncludesOne Primary ShaftOne One-Way BearingOne Snap RingOne spacerFitsRevo 3...

This is the Traxxas Black Chrome Front and Rear Bumper Set for the Revo 3.3, 1/10 E-Revo, and 1/10 E-Revo Brushless Trucks.Fits1/10 E-Revo Brushed1/10 E-Revo BrushlessRevo 3.3

This is the Traxxas Waterproof Sealed Receiver Box with Hardware for vehicles like the E-Maxx Brushless, Slash 4x4, and Blast boats.FitsBlastE-MaxxE-Maxx BrushlessSlash 4x4Slash 4x4 PlatinumSlash 4x4...

These are the Traxxas 3x23mm Roundhead Machine Screws. Each package includes six screws.Fits1/10 Monster Jam TrucksBandit XL-5CraniacSkullyStampede XL-5 2WD

These are the Traxxas 3x6mm Roundhead Machine Screws. Each package includes six screws.Fits:1/10 Monster Jam TrucksBandit XL-5CraniacNitro SlashNitro VeeSkullyStampede XL-5 2WD

This is a pair of Traxxas Tracer 2.2" Chrome Rear Wheels for the Traxxas Bandit XL-5 and VXL buggies. These wheels have a slot in the hub to slide over the axle pin.FEATURES:Chrome 5-spoke...

This is a pair of Traxxas Bandit 30-degree Caster Blocks. These will fit the Bandit XL-5 and VXL buggies.

This is a Traxxas Hard Chrome Suspension Pin Set with E-clips. These are used on the Nitro Rustler, Nitro Slash, Nitro Sport, and Nitro Stampede trucks.Includes:2 - 24X3mm pins4 - 31.5X3mm pins2 -...

This is the Traxxas E-Maxx Gear Cover for Single Motor Installation. This works on the E-Maxx 16.8V and E-Maxx Brushless when running a single motor and the 3997X single motor plate.

This is the Traxxas Auto-Detectable Smart Voltage Sensor.  The auto-detectable voltage sensor plugs into the optional TQi Telemetry Expander to provide real-time voltage data while you drive...

This is a set of Traxxas Rear Differential Housings for the Slash 4x4, Stampede 4x4, 1/10 Rally, Telluride, and the XO-1 carsIncludes: Two rear differential housing halves  

This is a pair of Traxxas Drive Yokes for the Revo, T-Maxx 3.3, E-Maxx 3905 and others. These yokes attach to the half shaft assemblies. Features: Black plastic construction Includes:Two...

These are 3x5mm Backplate screws for the Traxxas 2.5, 2.5R, and 3.3 engines. 3x6 mm cap-head machine screws with hex drive heads. Features: Black steel construction Includes: Six black...