Traxxas

This is the Traxxas Rustler 4x4 Complete LED Light Set w/Bumper & Roof Skid, Power Supply & Power Tap * Fits 6717 body Rustler 4X4 LED Light Kit The Traxxas Rustler 4X4 takes stadium truck...

This is the Traxxas Differential, rear (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash, Stampede, Rustler) (13/37 ratio)The Pro-BUILT 4X4 rear...

This is the Traxxas Differential, front (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash, Stampede, Rustler) (13/37 ratio)The Pro-BUILT 4X4...

This is the Traxxas Blue Aluminum Chassis Brace Kit for Rustler 4x4 & Slash 4x4 Low-CG Chassis Designed for the ExtremeThe heavy-duty chassis brace fits Slash 4X4 models equipped with the low-CG...

This is the Traxxas Red Aluminum Chassis Brace Kit for Rustler 4x4 & Slash 4x4 Low-CG Chassis Designed for the ExtremeThe heavy-duty chassis brace fits Slash 4X4 models equipped with the low-CG...

This is the Traxxas Green Aluminum Chassis Brace Kit for Rustler 4x4 & Slash 4x4 Low-CG Chassis Designed for the ExtremeThe heavy-duty chassis brace fits Slash 4X4 models equipped with the low-CG...

This is the Traxxas Orange Aluminum Chassis Brace Kit for Rustler 4x4 & Slash 4x4 Low-CG Chassis Designed for the ExtremeThe heavy-duty chassis brace fits Slash 4X4 models equipped with the...

This is the Traxxas Rustler 4x4 Battery Hold-Downs (3) w/Hardware (fits 6723R chassis with 162mm long battery compartment). The extended battery hold-down set fits the 6723R chassis with...

This is the Traxxas Rustler 4x4 Chassis w/162mm Long Battery Compartment (use with 7430R front bulkhead & 6726X battery hold-down). Chassis with extended 162 mm long battery compartment...

This is the Traxxas Rustler 4x4 Body Reinforcement Set for #6717 Bodies. The Rustler 4X4 body reinforcement sets provide added protection for your Rustler 4x4 during extreme driving. These...

This is the Traxxas Regulated 3-Amp 3V Accessory Power Supply w/Power Tap Connector. The accessory power supply provides a regulated 3-volt power output for stable, flicker-free LED performance...

This is the Traxxas 1/10 Summit Complete 2-Speed Transmission. This is a complete replacement 2-speed transmission with slipper clutch, and spur gear. The Pro-Built 2-speed transmission arrives...

This is the Traxxas 13-Tooth 0.8M 32-Pitch Pinion Gear w/5mm Bore, Includes Set Screw. 13-tooth pinion gear (32-pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you...

This is the Traxxas 11-Tooth 0.8M 32-Pitch Pinion Gear w/5mm Bore, Includes Set Screw. 11-tooth pinion gear (32-pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you...

This is the Traxxas Revo 3.3 Complete Transmission.  This is a complete replacement 2-speed transmission with brake, slipper clutch, and spur gear.

This is the Traxxas 20x32x7mm Black Rubber Sealed Ball Bearings (2). Pair of 20x32x7 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal bearings offer an even tighter...

This is the Traxxas 8x16x5mm Black Rubber Sealed Ball Bearings (2). Pair of 8x16x5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal bearings offer an even tighter seal...

This is the Traxxas 12x21x5mm Black Rubber Sealed Ball Bearings (2). Pair of 12x21x5 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal bearings offer an even tighter...

This is the Traxxas 17x23x4mm Black Rubber Sealed Ball Bearings (2). Pair of 17x23x4 mm black rubber seal ball bearings. A step above blue-seal bearings, black-seal bearings offer an even tighter...

This is the Traxxas T-Maxx 3.3 Complete Transmission.  This is the complete replacement 2-speed, forward only transmission, including brake, slipper clutch, and spur gear. The Pro-Built 2-speed...

This is the Traxxas ESC Mounting Plate (for installation of XL-5/VXL into Bandit or Rustler). Speed control mounting plate. Replacement part forBandit VXLBanditRustler VXLRustler

This is the Traxxas Complete Transmission for 1/10 2WD Rustler, Bandit, Stampede, and Slash trucks.  This comes pre-assembled with internal gears, slipper clutch, and spur gears, making for an...

This is the Traxxas ESC/Receiver Box Mounting Plate for Installation of XL-5/VXL & Waterproof Receiver Box on Stampede 2WD. ESC mounting plate for 2WD Stampede models.   Replacement part...

This is the Traxxas Velineon 540XL Brushless 2400Kv 70mm Motor (Assembled with 6.5mm Gold-Plated Bullet Connectors) (Not for use in Marine Models) The Velineon 540XL brushless motor delivers massive...

This is the Traxxas Heat Sink for 3351R and 3461 Motors. The aluminum heat sink fits Velineon 3500 and 540XL brushless motors when installed in 4X4 vehicles. (Does not fit 2WD configurations). For...

This is the Traxxas Cooling Fan Kit for 3351R and 3461 Motors (requires #3458 heat sink to mount). Lower your Velineon brushless motor’s temperatures with this cooling fan and shroud. The fan...

This is the Traxxas Complete Differential for the electric 1/10 2WD Rustler, Bandit, Stampede, and Slash trucks.  This is a great option for a quick and easy diff replacement. Compatible...

This is the Traxxas X-Maxx Rock N Roll Painted Body Assembled with Tailgate Protector and all Body Supports and Mounts Pre-Installed on the body.  This wild paint scheme is a great way to...

This is the Traxxas TRX-4 Expedition Rack and Mounting Hardware for use with the TRX-4 Sport body.

This is a pair of Traxxas Unlimited Desert Racer 139mm GTR 1.250 Rate Blue Stripe Progressive Shock Springs.Stock Replacement OnUnlimited Desert Racer (UDR)

This is the Traxxas 12-Tooth 32-Pitch Machined Hardened Steel Pinion Gear with Set Screw. These are a great way to improve drivetrain durability, and are a must if running a steel spur gear...

This is a pair of Traxxas Blue Rear Springs for use on XXL Ultra Shocks.Accessory Part ForBIGFOOT No. 1 Officially Licensed ReplicaFord F-150 RaptorHoss 4X4 VXLNitro SlashRustler VXLRustlerSlash 2WD...

This is the Traxxas Cush Drive Transmission Input Shaft.Replacement part forX-Maxx XRT

This is the Traxxas X-Maxx ProGraphix Body with Decals. The body comes with graphics pre-printed, and allows you to spray one final color for a professional finish, even for...

This is the Traxxas X-Maxx Body with Masks & Decals (clear, requires painting). Set your X-Maxx apart from others with a custom paint scheme using this body!FeaturesMolded from clear polycarbonate...

This is the Traxxas XO-1 Wing (Exocarbon) with Wing Mounts (2) and Washers (2) The XO-1 Exo-Carbon wing adds a glossy, high-tech carbon-fiber look to your supercar. The innovative Exo-Carbon finish...

This is the Traxxas XO-1 Wing Includes Wing Mounts (2)Washers (2)Accessory Part ForXO-1

These are the Traxxas 2.5x10mm Cap-Head Hex Machine Screws. Each package includes six screws.Set of six 2.5x10 mm cap-head machine screws with hex-drive heads Replacement Part For:1/16 E-Revo VXL1/16...

This is the Traxxas Low Center of Gravity (Low-CG) Chassis Conversion Kit for the Slash 4x4 trucks.  Lower your CG, increase corner speed, and lower your lap times!  Performance-proven with...

This is the Traxxas Rear Ring and Pinion Differential Gears for the Slash 4x4, Hoss 4x4, Stampede 4x4, Telluride, 1/10 Rally, and XO-1 vehicles. 37-tooth ring and 13-tooth pinion gears for rear...