Traxxas

This is a set of four Traxxas TRX-4 Red Anodized Aluminum GTS Shocks, Assembled without Springs, for use with the Traxxas #8140 TRX-4 Long Arm Lift Kits.Accessory Part ForTRX-4 Crawler KitTRX-4 Ford...

These are the Traxxas TRX-4 Sport Front and Rear Bumper Mounts. This set includes a standard front and rear bumper mount, as well as an offset rear bumper mount.Stock Replacement OnTRX-4 Sport

These are the Traxxas TRX-4 Rear Heavy Duty Chromoly Machined Axle Shafts with Portal Drive Input Gear. If you're looking to beef up your drivetrain, these are a must!Accessory Part ForTRX-4 Crawler...

This is the Traxxas Unlimited Desert Racer Rear Differential Output and Spider Gear Set. This diff gear set includes two output gears and four spider gears.Accessory Part ForUnlimited Desert Racer...

This is the Traxxas Unlimited Desert Racer 47-Tooth Center Differential Spur Gear.Accessory Part ForUnlimited Desert Racer (UDR)

These are the Traxxas Unlimited Desert Racer Desert Racer Wheels (2).Stock Replacement OnUnlimited Desert Racer (UDR)

This is the Traxxas TRX-4 Stainless Steel Screw and Hardware Kit. With a full set of stainless hardware, working on your TRX-4 just got that much easier! Give your TRX-4 a complete upgrade with this...

This is the Traxxas 1/16 Blue Aluminum Front and Rear Bulkhead Tie Bars with a 2.5x6 Capscrew.Stock Replacement On1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss...

This is the Traxxas 4-Tec 2.0 Rear Chassis Brace Gear Cover and Wire Retainer. This is used on both the Ford GT and Mustang GT versions.Fits4-Tec 2.0

This is the Traxxas TRX-4 Crawler Slipper Clutch Rebuild Kit. The kit includes two steel slipper slipper clutch discs, two friction inserts, one 4.0mm nylon locking nut, and two spring washers...

This is the Traxxas X-Maxx 6S Front Differential Pinion Gear.FeaturesHardened steel constructionIncludes: Pinion Gear for the Front Differential

This is set of Traxxas X-Maxx GTX Shock Caps, Spring Perches, and Adjusters. This package includes two of each part.Features Molded composite plastic construction Steel ball link inserts in shock...

This is the Traxxas X-Maxx Front Shock Tower. This includes both the left and right halves.FeaturesTwo-piece molded composite plastic construction, dark gray in colorIncludes: Left and Right Front...

This is the Traxxas Bearings: 4x8mm (2), 6x10mm (8), 8x12mm (5). Reduce friction and increase the precision of your LaTrax model by replacing the stock bushings with this bearing set upgrade...

This is the Traxxas Rocker arm set, long travel/ plastic bushings (8). This is Traxxas part number 7156Part Number: 7156 / TRA7156Fits1/16 SummitMore detail coming soon! Please check your vehicle...

This is the Traxxas Ball bearings, blue rubber sealed (8x12x3.5mm) (2). Pair of 8x12x3.5 mm blue rubber seal ball bearings. Blue-seal ball bearings keep dust and grime out for less maintenance,...

This is the Traxxas Motor Plate 6061-T6 Aluminum (Blue-Anodized) Machined from solid 6061-T6 aluminum, this motor plate offers rock-solid mounting security for major horsepower applications...

These are the Traxxas Sway Bar Mounts and Wires for 1/10 E-Revo, Revo 3.3 and Slayer Pro trucks.IncludesOne Thick Front Sway Bar (black in color)One Thin Front Sway Bar (silver in color)One Thick...

This is the Traxxas Right-Side Electronics Box with Cover, Rubber Charge Jack Plug, Foam Padding and Adhesive. This fits Revo 3.3 and Slayer trucks.FitsRevo 3.3SlayerSlayer Pro

This is the Traxxas Rear Tie Bar with 3x18mm Screws for all T-Maxx and E-Maxx trucks.IncludesOne Toe Link Tie BarTwo 3x18mm Socket Head ScrewsSpecificationsLength: 45mm (1.77")Width: 9mm (0...

This is the Traxxas Green Wheelie Bar for the Slash 2WD, electric Stampede 2WD, Skully, Craniac, electric Rustler, and Bandit vehicles.The unique patent-pending Traxxas adjustable wheelie bar...

This is the Traxxas Sealed Waterproof Receiver Box with Hardware.  Sealed receiver box for Traxxas micro receivers.IncludesOne Receiver BoxOne Rubber SealFoam PaddingTwo 2.5x8mm Cap Head...

These are the Traxxas XX-Long Chrome Steel Shock Shafts. Each package includes two shock shafts. Replacement steel shock shafts with chrome finish for Traxxas long Ultra Shocks (2) Replacement Part...

This is a pair of axles for the Traxxas Bandit XL-5 and VXL buggies. These are stock replacements.

This is pair of Traxxas Replacement Half-shafts for us on the Bandit XL-5 and Bandit VXL Brushless buggies.Includes:(2) Inside shafts(2) Outside shafts(4) Universal joints (metal balls with 4 pins...

This is the Traxxas Rear Bulkhead for 1/10 Slash 4x4 trucks with the Low-CG Chassis including Slash 4x4 Platinum, Ultimate, and also for the 1/10 Rally vehicles. Rear bulkhead for vehicles equipped...

These are the Diff and Trans Drive Yokes for the Traxxas T-Maxx 3.3, E-Maxx 16.8V and E-Maxx Brushless, Revo 3.3, E-Revo and E-Revo Brushless trucks. FEATURES:Black plastic...

These are Traxxas 4mm Stainless Locking Nuts. These will fit many different Traxxas vehicles, and are a great item to keep in your toolbox.Features:Stainless steel construction.Nylon insert...

This is the Traxxas Complete Differential Assembly with Grease This pre-assembled differential is ready-to-install in any Magnum 272R transmission. The sealed differential comes filled with grease...

This is the Traxxas 6061-T6 Aluminum (Red-Anodized) Center Differential Carrier Mount Made from tough 6061-T6 aluminum, this center differential carrier mount combines maximum strength with bright...

This is the Traxxas 6061-T6 Aluminum (Orange-Anodized) Center Differential Carrier Mount Made from tough 6061-T6 aluminum, this center differential carrier mount combines maximum strength with bright...

This is the Traxxas 6061-T6 Aluminum (Green-Anodized) Center Differential Carrier Mount Made from tough 6061-T6 aluminum, this center differential carrier mount combines maximum strength with bright...

This is the Traxxas 6061-T6 Aluminum (Dark Titanium-Anodized) Center Differential Carrier Mount Made from tough 6061-T6 aluminum, this center differential carrier mount combines maximum strength with...

This is the Traxxas 6061-T6 Aluminum (Blue-Anodized) Center Differential Carrier Mount Made from tough 6061-T6 aluminum, this center differential carrier mount combines maximum strength with bright...

This is the GPM Black Aluminum 6061-T6 Rear L-shape Emulation Piggy Back (Built-in Piston Spring) Adjustable Spring Dampers 143mm Features: Reduces friction and absorbs pressure during...

This is the Traxxas Wire Harness and Mount Wire harness and mount for the #9790 trailer LED light kit.

This is the Traxxas Stampede 4X4 Brushless Green Body w/Mounts & Support for Clipless Mounting Is it time to upgrade your Stampede 4X4 BL-2s with an all-new look? These tough polycarbonate...

This is the Traxxas Canyon Trail Tires & wheels, assembled (black 1.0" wheels, Canyon Trail 2.2x1.0" tires) (2) 1.0″ Canyon Trail tires are scaled versions of standard TRX-4 rubber with...

This is the Traxxas Canyon Trail Tires 2.2x1.0" (2) Canyon Trail tires are scaled versions of standard TRX-4 rubber with aggressive lugs for dynamic traction. The soft-compound rubber grips onto rock...

This is the Traxxas TRX-4M Wheels 1.0" (black) (2) Designed for TRX-4M models, these 1.0″ black multi-spoke wheels hold the tire securely for rugged crawling action. Sold as a pair. Replacement...