This Combo Includes:
Traxxas Stampede 4X4 Brushless RTR Monster Truck
Traxxas EZ-Peak ID 4-Amp Charger
Traxxas 3S 4000mAh LiPo Battery
This is the Traxxas Stampede 4X4 1/10 Scale Brushless Ready-to-Run Monster Truck with TQi Sport 2.4 GHz 2-Channel Radio System with TSM, Velineon 3s Brushless Power System, Waterproof Electronics, and Clipless Painted Body.
Extreme Power. Extreme Traction. Extreme Fun!
Stampede 4X4 Brushless is the king of 1/10 scale monster trucks with its towering monster truck stance and unstoppable 4WD traction. Now Stampede is stronger than ever with the new Velineon 3s brushless power system. 4-wheel burnouts and 50+ mph speed are no problem for Stampede’s Extreme Heavy-Duty suspension and driveline which deliver pack-after-pack fun all day long.
New 3s Brushless Horsepower
Stampede 4X4’s new Velineon 3s power system is a brushless powerhouse that transforms 3s LiPo power into brutal acceleration and 50+ mph speed, out of the box with no gearing changes required. The fan-cooled VX3 speed control is feature-packed and simple to use with Traxxas EZ-Set one-button programming. The powerful V3200 motor is a model of speed, power, and efficiency.
New GTR Shocks
New composite GTR shocks complement Stampede 4X4’s long-travel suspension to create a supremely plush ride. GTR shocks hold over 70% more oil than standard Ultra Shocks for consistent damping performance. X-ring seals keep oil in and dirt out for smooth suspension compression and rebound. Spring preload and ride height changes are as simple as turning the threaded collar and the spring retainers are captured with a screw so they can't pop off.
New Talon MXT Tires
Stampede’s new Talon MXT tires put the power to the ground with massive traction and high-speed performance. The angled tread pattern creates extreme forward bite on loose surfaces with an open block design to clear away mud and debris. The tires come mounted and glued to rugged monster truck wheels with removable center hubs.
Extreme Heavy-Duty Upgrade Kit
Stampede 4X4 Brushless gets a massive boost in strength from its factory-installed Extreme Heavy-Duty Upgrade Kit. The kit replaces key driveline and suspension components with beefed-up parts made for ultimate strength and durability. From the HD suspension arms to the steel wheel hubs, this driveline is built to take on 3s brushless power and come back for seconds.
Features
Reinforced Front and Rear Bumpers
Tough reinforced bumpers protect the chassis against impacts. The specially designed front bumper provides a high approach angle that allows Stampede to climb up and over obstacles with ease.
Wheelie Bar
A wheelie bar is mandatory equipment to handle Stampede 4X4's wheel-standing torque. Ride never-ending wheelies on pavement and keep the wheels-up action under control during hard acceleration. The integrated wheelie bar has the perfect amount of flex to absorb impacts on less-than-perfect landings. It also features a convenient handle to transport Stampede to the next adventure.
3-Channel TQi Sport Receiver
The TQi Sport receiver is compatible with all TQi and TQi Sport transmitters. A built-in failsafe returns the throttle to neutral and holds the steering in the last known position in the event of a signal loss. The receiver features full Inclinometer and telemetry functionality accessible through a TQi radio using the Traxxas Link app.
Dual-Bellcrank Steering
A dual-bellcrank design pivots on rubber-sealed ball bearings for smooth action in the harshest conditions. The integrated cam-operated servo saver protects the servo gears from crash impacts without sacrificing steering precision.
Waterproof Receiver Box
Stampede's waterproof receiver box keeps the receiver safe and dry while still allowing easy access for maintenance. The antenna and servo wires route neatly through a patented water-tight seal for true all-weather fun.
Metal Gear Servo
Stampede 4X4 Brushless features a new servo with the durability of an all-metal gear train. The new servo delivers quick, precise control with the security and convenience of fully waterproof construction.
VX3 Electronic Speed Control
The fully waterproof VX3 ESC transforms 11.1 volts of LiPo power into 50+ mph performance with the simplicity of Traxxas; EZ-Set one-button programming. A large aluminum heat sink with cooling fan keeps temperatures down for longer run times. The VX3 comes loaded with high-tech features like race-inspired High-Resolution Linear Braking and real-time telemetry via Traxxas Link.
Velineon V3200 Motor
Designed for 3-cell LiPo power, the V3200 motor is optimized for extreme power and efficiency with a large 5 mm output shaft. Ultra-high temperature sintered Neodymium magnets provide massive torque and linear power. The unique low-maintenance design features high-speed ball bearings with both internal and external cooling fans for consistent high-power output, run after run.
Torque-Biasing Center Drive
Stampede 4X4's Torque-Biasing Center Drive absorbs shocks to improve driveline durability and distributes equal power to all four wheels for mind-blowing acceleration. It's easy to tune for different traction surfaces by replacing the oil in the sealed housing.
Heavy-Duty Steel Spur Gear
Designed from the start to handle big brushless horsepower, Stampede 4X4's driveline uses a steel spur gear with large 0.8 module/32-pitch teeth for reliability no matter how much power you pour on.
*Click to See the Full Line of Stampede 4x4 Parts/Accessories
Specifications
Type: Monster Truck
Speed: 35+ mph with 2s LiPo battery, 50+ mph with 3s
Skill Level: 1
Scale: 1/10
Weight: 5.98 pounds (2.7 kg)
Length: 17.87 inches (454 mm)
Width: 13.10 inches (333 mm)
Front Track: 13.10 inches (333 mm)
Rear Track: 13.10 inches (333 mm)
Height: 8.34 inches (212 mm)
Wheelbase: 11.62 inches (295 mm)
Center Ground Clearance: 2.44 inches (62 mm)
Driveline: Shaft-driven 4WD
Differential Type: Hardened steel bevel, sealed, limited slip
Gear Ratio (Internal): 15.36:1
Gear Pitch: 32 pitch
Steering Servo: 2057 metal gear waterproof
Radio System: TQi Sport 2.4 GHz 2-channel radio with TSM
Battery Compartment Specs: 162 mm X 50 mm X 26 mm
Motor Name: Velineon V3200 (patent pending)
Motor Type: Sensorless brushless
Weight: 7.48 ounces (212 g)
Length: 3.15 inches (80 mm)
Diameter: 1.53 inches (39 mm)
Shaft Size: 5 mm
Connector Type:3.5 mm Bullet
ESC Name: VX3 Electronic Speed Control
ESC Type: Brushless
Voltage Range: 2-cell or 3-cell LiPo (NiMH not supported)
Case Size: 2.40″ (61 mm) x 2.09″ (53 mm) x 1.69″ (43 mm)
Weight: 4.20 ounces (119 g)
BEC Voltage: 6.0 volts
Motor Connectors: 3.5 mm Bullet
Battery Connectors: Traxxas High-Current Connector
Requires
(4) AA Batteries for Transmitter
