Robinson Racing

This is Robinson Racing 72-Tooth Steel Spur Gear with Ball Bearing.  It is for the Traxxas T-Maxx .15, 2.5, and Nitro Rustler.  This is much more durable than the stock gear...

This is the Robinson Racing GEN3 Slipper Kit with 65-tooth Steel Spur Gear for the Traxxas E-Revo Brushless and E-Maxx Brushless trucks.Robinson Racing GEN3 Slipper Units are over-engineered to meet...

This is the Robinson Racing Gen3 Slipper Kit with 54-Tooth 0.8M Steel Spur Gear for the Traxxas Slash 4x4 trucks. GEN3 Slipper Units will not fail under the enormous load conditions of today's...

This is the Robinson Racing Gen3 Slipper Kit with 54-Tooth Steel Spur Gear for the Traxxas Stampede 4x4 VXL trucks.GEN3 Slipper Units will not fail under the enormous load conditions of today's...

This is the Robinson Racing Extra Hard Steel 14-Tooth 0.8 Mod Pinion Gear with 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede...

This is the Robinson Racing Gen3 Slipper Kit with 56-Tooth 0.8M Steel Spur Gear for the Traxxas Slash 2WD trucks.GEN3 Slipper Units will not fail under the enormous load conditions of today's...

This is the Robinson Racing Gen3 Slipper Kit with 38-Tooth 1.0M Steel Spur Gear for the Traxxas Revo 3.3 trucks.GEN3 Slipper Units will not fail under the enormous load conditions of today's...

This is a Robinson Racing 5mm-1/8" Pinion Gear Reducer Sleeve. This adapts 5mm Pinions to 1/8" motor shafts. Features: Metal Construction Gunmetal in Color Includes: One Reducer Sleeve

This is the Robinson Racing 40-Tooth Steel Spur Gear and 16-Tooth Steel Clutch Bell set for the Traxxas Revo 2.5 and 3.3 trucks.  This gear set will greatly increase the durability of your truck...

This is the Robinson Racing Extra Hard 24-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash...

This is the Robinson Racing Extra Hard 20-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash...

This is the Robinson Racing Extra Hard Steel 12-Tooth 0.8 Mod Pinion Gear with 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede...

This is the Robinson Racing Extra Hard Steel 13-Tooth 0.8 Mod Pinion Gear with 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede...

This is the Robinson Racing Extra Hard Steel 11-Tooth 0.8 Mod Pinion Gear with 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash 4x4, Stampede...

This is the Robinson Racing Extra Hard 22-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash...

This is the Robinson Racing Extra Hard 18-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash...

This is the Robinson Racing Extra Hard 25T Pinion - 5mm Bore .8 Module (31.75P) Extra hard high carbon brushless motor pinions are built to last with hi-performance GEN3 steel slipper units. Pinion...

This is the Robinson Racing Extra Hard Steel 20-Tooth Pinion with 1 Mod Pitch and 5mm Bore.FeaturesExtra hardened steel construction for durabilityPrecision madeFor use in extreme...

This is the Robinson Racing Extra Hard 16-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash...

This is the Robinson Racing Xtra Hard 5mm Bore Steel 12-Tooth 1.0 Module Pinion Gear.  This works in brushless setups for the Traxxas Revo 2.5, 3.3, and T-Maxx 3.3, and it also works with...

This is the Robinson Racing Xtra Hard 5mm Bore Steel 11-Tooth 1.0 Module Pinion Gear.  This works in brushless setups for the Traxxas Revo 2.5, 3.3, and T-Maxx 3.3, and it also works with...

This is the Robinson Racing Extra Hard 17-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash...

This is the Robinson Racing Extra Hard 15-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash...

This is the Robinson Racing Xtra Hard Steel 18-Tooth Pinion Gear with a 5mm shaft hole.  This is perfect for use on the Traxxas Revo and E-Maxx when running electric motors with a...

This is the Robinson Racing Xtra Hard 5mm Bore Steel 13-Tooth 1.0 Module Pinion Gear.  This works in brushless setups for the Traxxas Revo 2.5, 3.3, and T-Maxx 3.3, and it also works with...

This is the Robinson Racing Extra Hard Steel 25-Tooth Pinion with 1 Mod Pitch and 5mm Bore.FeaturesExtra hardened steel construction for durabilityPrecision madeFor use in extreme...

This is the Robinson Racing Extra Hard Steel 19-Tooth Pinion with 1 Mod Pitch and 5mm Bore.FeaturesExtra hardened steel construction for durabilityPrecision madeFor use in extreme...

This is the Robinson Racing Gen3 Slipper Kit with 60-Tooth 0.8M Steel Spur Gear for the Traxxas E-Revo Brushless trucks. This can also be used on the E-Maxx Brushless, but it will require running a...

This is the Robinson Racing Extra Hard 19-Tooth 0.8 Mod (31.75P) Pitch Pinion Gear with a 5mm Bore. This is a perfect upgrade for use on motors with a 5mm shaft in vehicles like the Traxxas Slash...

This is the Robinson Extra Hard Steel 17-Tooth 1.0 Mod Pinion Gear with 5mm Bore.FeaturesExtra hardened steel construction for durabilityPrecision madeFor use in extreme conditionsIncludesOne 17...

This is a Robinson Racing 15-Tooth 48 Pitch Pinion Gear. The 48 Pitch Hard Nickel Plated Alloy Steel Pinions are precision cut gears with an extremely hard coating that makes them last and last and...

This is the Robinson Racing Xtra Hard Steel 16-Tooth Pinion Gear with a 5mm shaft hole.  This is perfect for use on the Traxxas Revo and E-Maxx when running electric motors with a...

This is a 48 pitch pinion gear made out of an alloy steel material. Available in sizes from 12 to 35 teeth. Choose the number that will work best for you.

This is the Robinson Racing Xtra Hard 5mm Bore Steel 15-Tooth 1.0 Module Pinion Gear.  This works in brushless setups for the Traxxas Revo 2.5, 3.3, and T-Maxx 3.3, and it also works with...

This is the Robinson Racing Xtra Hard 5mm Bore Steel 14-Tooth 1.0 Module Pinion Gear.  This works in brushless setups for the Traxxas Revo 2.5, 3.3, and T-Maxx 3.3, and it also works with...