This is the Tekno RC M6 Front Driveshaft, Steering Block, and Stub Axle set. The Tekno RC M6 Driveshafts and Steering Blocks will give your Slash 4×4, Stampede 4×4, Rustler 4×4, and Hoss the ultimate in performance and durability.For...

This is the Team Integy Blue Aluminum Evolution-5 Shock Tower for the Traxxas T-Maxx 2.5, 3.3, E-Maxx 16.8V, and E-Maxx Brushless Vehicles that have square body posts. FEATURES Aluminum construction Blue in color INCLUDESOne Shock...

This is a pair of GPM Racing Orange Aluminum Front/Rear Brake Calipers for Traxxas Unlimited Desert Racer trucks. These are made of 6061-T6 aluminum, then anodized for a realistic finish. These can be used on the front or rear of the truck (2 packs...

This is the Traxxas TRX-4 Metal Steering Servo Horn with 3x14 Buttonhead Capscrew. Add this steel servo horn to your TRX-4 or TRX-6 for total steering authority and increased durability. Replacement Part For:TRX-4 1979 Chevrolet BlazerTRX-4 1979 Ford...

This is the Traxxas 55-Tooth Spur Gear for 4-Tec 2.0. This is designed for use with 4-Tec 2.0 vehicles running the VXL brushless power system. Fits4-Tec 2.0

This is a pair of Traxxas Slash Paddle Tires Mounted on Chrome Wheels. These fit the Slash 4x4 front and rear, or the Slash 2WD rear. Put these on your truck for added grip on sand, snow, mud, or the occasional blast across the water!Tires & wheels,...

This is the Traxxas 20-Tooth Pinion Gear with 1.0 Mod Pitch and a 5mm Shaft Bore. 20-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model...

This is the Traxxas 20M Weight Differential Oil. Super-thick 20 million weight differential oil has the consistency of thick putty and is most often used in center differentials. It may also be used to lock front or rear differentials when equal power...

This is the RPM Low Visibility Wheelie Bar for use with RPM Bumpers on the Traxxas Slash 2WD, Slash 4x4, and Losi Ten-SCTE short course 1/10 scale trucks. These must be used with the RPM bumpers for the Slash, or the RPM bumper mounts for the Ten-SCTE.A...

This is a pair of RC4WD Mud Slingers 2.2" Rock Crawler and Trail Truck Tires. These feature advanced X3 Soft Compound rubber and have an ultra-aggressive off-road tread pattern.SpecificationsOuter Diameter: 4.88" (124mm) Width: 1.93" (49.1mm) Inner...

This is the Tekno RC M6 Driveshaft and Rear Hub Set for the Traxxas Hoss 4x4, Rustler 4x4, Slash 4×4 and Stampede 4x4 trucks. Featuring massive 6mm stub axles, this set will give your truck the ultimate in performance and durability...

This is the Traxxas TRX-4 Bronco Grill with Retainers, Headlight Housings, and Lens for use in the part 8010 Series Bodies.Stock Replacement OnTRX-4 Ford Bronco

This is a set of Traxxas Stub Axle Pins.  These pins slide through the axle and keep the wheel hexes from spinning on the axle. Set of four replacement stub axle pins

This is a Traxxas 48P, 90T Spur Gear for models with Torque Control Slipper Clutch. FEATURES:48 pitch90 toothDesigned for models with a slipper clutchBlack plastic construction INCLUDES:One spur gear SPECS:Pitch:   48Tooth:   90

This is the Pro-Line Raid Front/Rear 2.2"/3.0" 12 & 14mm SC Silver/Black Bead-Loc Wheels (2) for the Front/Rear 2WD Slash and Rear 4WD Slash. Features One sided Bead-Loc captures both sides of tire evenly Removable Hexes for Quick Wheel Offset...

This is the Traxxas 21-Tooth Pinion Gear (48-pitch) with set screw.Fits:1/10 Monster Jam Trucks1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave Digger1/16 Kyle Busch Truck1/16 Rally VXL1/16 Slash 4x41/16...

This is a 2-ounce bottle of Team Associated 10-Weight Silicone Shock Oil.Features100% pure silicone oilWill not thin out in hot weather or thicken up in cold weatherIncludes: One 2 oz. bottle of silicone oilSpecifications:10wt (the higher the weight...

This is the Traxxas Jato Straight air filter housing with foam insert and cable tie. Fits Jato with the TRX 2.5, 2.5R, or 3.3 engine. Replacement Part ForJatoTRX 2.5RTRX 3.3

This is the Traxxas 4-Tec 2.0 Steel Inner Drive Cups and Screwpins for use with CV-Driveshafts (2). Steel inner CV drive cups offer superior durability for high-power setups. Includes: Screw pins (2).Accessory Part For4-Tec 2.0 AWD Chassis4-Tec 2.0 VXL...

This is the Traxxas TRX-4 Spool/locker, Differential Housing Plug, and E-Clip. These can be used in the front and rear diffs to completely lock the differential.Replacement Part OnTRX-4 SportAccessory Part ForTRX-4 Crawler KitTRX-4 Ford BroncoTRX-4 Land...

This is the RPM Black Front Bulkhead for Traxxas 2WD trucks, including the Slash 2WD, Nitro Slash, Rustler, Nitro Rustler, Stampede 2WD, Skully, Craniac, Bigfoot, Nitro Stampede, and Bandit trucks and buggies.This part is a direct replacement for Traxxas...

This is the Traxxas Antenna Cap Set with Antenna Spool. The antenna spool is used for wrapping excess antenna wire before inserting it in the antenna tube to prevent wire from hanging out the end of the tube, preventing damaged antenna wires caused by...

This is the Traxxas Power Cell 11.1V 1400mAh 25C 3S LiPo Battery with iD Connector for use with Traxxas 1/16 VXL Brushless Vehicles. This Traxxas 2823X battery is ideal for the 1/16 E-Revo VXL, Summit VXL, Slash 4x4 VXL, Rally VXL, and Mustang VXL...

This is a package of three Traxxas Air Filter/Pre-Filter Foam Inserts for the Traxxas 3.3 racing engine.  This engine is used on vehicles such as the Revo, Jato, and T-Maxx. Features: Constructed of foam and pre-oiled to trap dirt Pre-Filter...

This is the Traxxas Heat Shield Tubing for Fuel Line (2) Fiberblass heat shield tubing Replacement Part ForJatoNitro RustlerNitro SlashRevoSlayer Pro 4X4T-MaxxTRX 2.5RTRX 3.3

These are the JConcepts Renegades Gold Compound Monster Truck Tires and Foam Inserts (2). The "gold" compound feels harder to the touch and excels on carpet, AstroTurf and polished concrete surfaces and expands less during high-speedsFits - JConcepts...

This is the Hot Racing 54-Tooth Mod 1 Hardened Steel Spur Gear for Traxxas E-Revo 2.0, X-Maxx 6S & 8S, and XO-1 vehicles.This is an upgrade for Traxxas part 6449 and 6449X gears.Features- CNC machined hardened steel construction- Black oxide finished-...

These are the RPM Blue Front Caster Blocks for Traxxas electric Slash 2WD, Rustler, and Stampede 2WD trucks, as well as the Nitro Slash. This will fit XL-5 and VXL versions of the electric trucks.RPM Caster Blocks for the Traxxas Slash 2wd, nitro Slash,...

This is the Traxxas Extended Battery Hold Down for the Stampede 4x4 trucks. It allows for the use of taller multi-cell battery packs.Includes: Battery hold down, metal post, body clip

This is the Team Integy Silver Aluminum Evolution-5 Shock Tower for the Traxxas T-Maxx 2.5, 3.3, E-Maxx 16.8V, and E-Maxx Brushless vehicles that have square body posts. FEATURES Aluminum construction Silver in color INCLUDESOne Shock...

These are the optional Traxxas Orange Aluminum 59mm Turnbuckle Toe Links for the Traxxas 1/10 Slash 2WD, Rustler XL-5 & VXL trucks.Traxxas aluminum turnbuckles make it easy to add strength and adjustability to Traxxas models. These turnbuckles come...

These are the optional Traxxas Pink Aluminum 59mm Turnbuckle Toe Links for the Traxxas 1/10 Slash 2WD, Rustler XL-5 & VXL trucks.Traxxas aluminum turnbuckles make it easy to add strength and adjustability to Traxxas models. These turnbuckles come in...

These are the optional Traxxas Green Aluminum 59mm Turnbuckle Toe Links for the Traxxas 1/10 Slash 2WD, Rustler XL-5 & VXL trucks.Traxxas aluminum turnbuckles make it easy to add strength and adjustability to Traxxas models. These turnbuckles come in...

This is the Hot Racing Differential Spool Locker for Traxxas Slash 2WD, Stampede 2WD, Rustler, Bandit, and Traxxas Ford Raptor Slash 2WD trucks. This part replaces the differential gears for a locked differential and is recommended for off-road use only...

This is the Traxxas Differential Gear Set with Output and Spider Gears. These can be used in the front or rear diff of the truck. Differential gear set includes output gears (2), spider gears (4), and 16x23.5x0.5 mm PTFE washers (2) FeaturesHardened...

This is the Integy MSR9 Rear Piggyback Shock Set for the Traxxas Stampede, Rustler & Slash FEATURES Aluminum Construction Threaded Aluminum Shock Bodies Piggyback Shock Oil Reservoir Knurled Spring Rate...

These are the optional Traxxas Blue Aluminum 59mm Turnbuckle Toe Links for the Traxxas 1/10 Slash 2WD, Rustler XL-5 & VXL trucks.Traxxas aluminum turnbuckles make it easy to add strength and adjustability to Traxxas models. These turnbuckles come in...

This is a Traxxas Revo 38-Tooth Spur Gear.  This will fit the Revo 2.5 and 3.3 trucks.  The lower the number of teeth on the spur gear, the higher top end speed you will have.  The higher the number of teeth, the more torque...

This is an Integy Silver Aluminum Rear Skid Plate for the Traxxas T-Maxx .15, 2.5, 3.3, E-Maxx, and all other Maxx series trucks.  It will fit all versions of the T-Maxx and E-Maxx.  As you can see in the picture,...

This is a pair of Pro-Line X-Maxx Badlands MX43 Pre-Mounted on Pro-Loc Impulse Black/Grey Wheels. These tires stand a massive 8.3-inches tall and are constructed with an ultra-durable anti-ballooning tire compound to hold up better under the extreme...