This is the Traxxas Male Battery Connector Set (2).  These are for use as an ESC connector. Note: 4S Traxxas ID batteries are not compatible with these connectors due to the connector shape.

This is the LaTrax Dual Port USB Charger for the 650mAh Lipo batteries used in the LaTrax Alias Quad-Rotor Helicopter. This charger makes it possible to charge two batteries at once!

This is the Traxxas Battery hold-down, tall (1)/ hold-down retainer, front & rear (1 each) (allows for installation of taller, multi-cell batteries)Extended battery hold-down with front and rear retainers accommodates taller batteries on vehicles...

This is a Red Aluminum Pushrod Set (2 rods) with installed rod ends for use with Progressive 1 (part TRA5357), Progressive 2 (part TRA5358), or long travel rockers. These pushrods are 102mm in length. If you would like to replace the front and rear...

This is the Hot Racing Blue Aluminum Heat Sink Cooling Fan for use on 540 and 550 brushed and brushless motors in vehicles like the Traxxas Rustler XL-5 and VXL, Stampede 2WD, Stampede 4x4, Slash 2WD, Slash 4x4, and more! The versatile two-piece heat...

This is a pair of RPM Upper and Lower Suspension A-Arms for the Traxxas X-Maxx 6S and 8S trucks. This includes one upper and one lower arm. The upper arm replaces Traxxas part 7729, and the lower arm can be used in place of Traxxas part 7730 or 7731. To...

This is the Traxxas Steering Bellcrank Set for the Slash 2WD, Slash 4x4, 1/10 Rally, Bandit, Rustler, and Stampede 4x4 vehicles. Features: Composite nylon construction Replaces a worn or damaged bellcrank set Includes:One Left Bellcrank LowerOne Left...

This is the Traxxas TQi 2.4 GHz High Output 2-Channel Radio System with Traxxas Link Enabled and TSM 2-Ch Transmitter, 5-Ch Micro Receiver) Replaces transmitter: TRA6509R

This is the Traxxas TQi 2.4 GHz High Output radio system, 4-channel with Traxxas Link Bluetooth module and TSM 4-Ch Transmitter, 5-Ch Micro Receiver) Replaces transmitter: TRA6507R

These are the RPM Body Savers for Traxxas E-Revo 2.0 trucks. These are perfect to upgrade a stock body before use, or to repair/salvage an already damaged body to prevent having to buy a new one right away.RPM engineers examined a brand new E-Revo 2.0...

This is the Traxxas 2082 Gear Set for the 2080 Micro Waterproof Servos.These have been used in vehicles such as:1/16 E-Revo Brushed1/16 E-Revo VXL Brushless1/16 Ford Fiesta1/16 Ford Mustang Boss 3021/16 Grave Digger1/16 Kyle Busch Truck1/16 Rally VXL1/16...

This is a Traxxas Steel Differential Ring and Pinion Gear Set for the 1/16 E-Revo, Summit, Slash, Rally, and other 1/16 Traxxas vehicles. This will fit both XL-2.5 and VXL models.Includes:One Differential Ring GearOne Pinion Gear

This is the RC4WD 540 Crawler 55-Turn Brushed Motor for use in 1/10 scale rock crawlers from RC4WD, Axial, and other crawlers and scale trail vehicles. It comes pre-wired with bullet connectors.Features:Custom made 540 Steel case Chrome plated case...

This is the Hot Racing Steel Helical Spiral Differential Gear Set for the Traxxas 1/16 4X4 vehicles, including the 1/16 E-Revo, 1/16 Slash 4X4, 1/16 Rally, and 1/16 Summit. This set is compatible with the front or rear differentials. This is a perfect...

This is the Integy Black Universal 360 Car Stand Workstation Works with most 1/10 & 1/8 Scale RC Trucks/Cars/Buggies Work on your chassis the right way with the Integy Universal 360 Car Stand Workstation. Designed to be used with most 1/10 and 1/8...

This is the Integy Red Universal 360 Car Stand Workstation Works with most 1/10 & 1/8 Scale RC Trucks/Cars/Buggies Work on your chassis the right way with the Integy Universal 360 Car Stand Workstation. Designed to be used with most 1/10 and 1/8...

This is the Integy Blue Universal 360 Car Stand Workstation Works with most 1/10 & 1/8 Scale RC Trucks/Cars/Buggies Work on your chassis the right way with the Integy Universal 360 Car Stand Workstation. Designed to be used with most 1/10 and 1/8...

This is the Viper Scale Racing (WHITE) Mega G/G+ Low Pro Medium Rear Tires M1 This PST Pro Slip-on Tire has been specifically designed for the Tomy Mega G and Mega G+ cars. This is a low profile design that improves speed and handling over the stock...

This is the Viper Scale Racing (NEON PINK) Mega G/G+ Low Pro Medium Rear Tires M1 This PST Pro Slip-on Tire has been specifically designed for the Tomy Mega G and Mega G+ cars. This is a low profile design that improves speed and handling over the stock...

This is the Viper Scale Racing (NEON GREEN) Mega G/G+ Low Pro Medium Rear Tires M1 This PST Pro Slip-on Tire has been specifically designed for the Tomy Mega G and Mega G+ cars. This is a low profile design that improves speed and handling over the stock...

This is the Viper Scale Racing (BLACK) Mega G/G+ Low Pro Medium Rear Tires M1 This PST Pro Slip-on Tire has been specifically designed for the Tomy Mega G and Mega G+ cars. This is a low profile design that improves speed and handling over the stock...

This is the Viper Scale Racing (NEON PINK) Mega G/G+ Low Pro Soft Rear tires S1 This new PST Pro Slip-on Tire has been specifically designed for the AFX Mega G and Mega G+ cars. This is a low profile design that improves speed and handling over the stock...

This is the Viper Scale Racing (WHITE) Mega G/G+ Low Pro Soft Rear tires S1 This new PST Pro Slip-on Tire has been specifically designed for the AFX Mega G and Mega G+ cars. This is a low profile design that improves speed and handling over the stock...

This is the Viper Scale Racing (NEON GREEN) Mega G/G+ Low Pro Soft Rear tires S1 This new PST Pro Slip-on Tire has been specifically designed for the AFX Mega G and Mega G+ cars. This is a low profile design that improves speed and handling over the...

This is the Viper Scale Racing (BLACK) Mega G/G+ Low Pro Soft Rear tires S1 This new PST Pro Slip-on Tire has been specifically designed for the AFX Mega G and Mega G+ cars. This is a low profile design that improves speed and handling over the stock...

This is the Viper Scale Racing Viper VSPEC/Modified M1 Production PST Tires Stock Replacement VSPEC and Modified RTR rear tires. Tires are M1 compound and size varies from .440 to .444 Includes(2) Viper VSPEC/Modified M1 Production PST Tires

This is the Power Hobby Aluminum RC Car Repair Work Stand Works with most 1/8, 1/10, 1/12, 1/16 & 1/18 Scale RC Trucks/Cars/Buggies Features360-Degree Rotation SpecificiationsColor: BlueMaterial: Aluminum AlloyHeight: Adjustable from 3.54" (90mm) to...

This is the RPM Pit-Pro Extreme Car Stand for 1/10 and 1/8 Scale vehicles. Car stands have been around for a long time, with minimal innovation or ingenuity. That changes NOW! The all-new RPM Pit-Pro Extreme Car Stand is a completely new and unique stand...

This is the Pro-Line PRO Car Stand with Multi-Use Toppers Car StandThe Pro-Line Car Stand is the most versatile solution for working on and displaying RC vehicles. Designed to replace outdated foam and bulky aluminum stands, it delivers smooth rotation,...

This is the Racers Edge 1/10 RC Car 2 Layer Pit/Display Stand The 1/10 Pit/Display Stand by Racer's Edge is a two-layer stand designed to hold up to two 1/10 scale RC cars, with a compact fit for 1/8 scale models. Its foldable design and included...

This is the GPM Racing Hardened Steel Center Driveshaft Set for Traxxas 1/16 E-Revo, 1/16 Summit, and 1/16 Slash 4x4 trucks. These are built to handle just about anything you can throw at them. Four new screw pins are included to complete the...

These are the Pro-Line BFGoodrich Krawler T/A KX 1.9" Predator Rock Crawler Tires (2) with Foam Inserts for 1/10 Rock Crawlers. These are 4.75" tall, giving great performance and realism in a licensed design of the popular full-scale tire...

This is the Traxxas LaTrax Metal Differential Gear Set with Output, Spider, and Ring Gears. This is an excellent upgrade for LaTrax vehicles that originally came with plastic gears. It is a direct replacement for the newer vehicles equipped with metal...

This is the Integy Type II Silver Aluminum Rear Shock Tower for the Traxxas Stampede 2WD XL-5, Rustler and Slash 2WD FEATURES Silver in color Fits rear of vehicle INCLUDESOne Type II Aluminum Rear Shock Tower REQUIRESInstalling on...

These are Optional Rear Bearing Carriers for the Traxxas Electric Rustler, Stampede and Bandit. The rear axles fit into these bearing carriers. FEATURES Black nylon construction INCLUDESTwo rear bearing (hub) carriersTwo RPM...

This is the Viper Scale Racing .344 Razor Front Tires Razor front replacement tires. Sold in Pairs Recommended Size range below:Viper V1- .328-.350Storm- .345-.360G+ .344-.350Tyco 440X2 Narrow- .344-.350Mega G- .360Tyco 440×2 Wide pan .405

This is the Viper Scale Racing .350 Razor Front Tires Razor front replacement tires. Sold in Pairs Recommended Size range below:Viper V1- .328-.350Storm- .345-.360G+ .344-.350Tyco 440X2 Narrow- .344-.350Mega G- .360Tyco 440×2 Wide pan .405

This is the Viper Scale Racing PST Slip-on Tyco 440X2 Polymer Rear (M1 Compound) All New PST slip on tires designed specifically for the TYCO 440X2 with upgrade Polymer magnets. Tires measure .454″ when mounted on stock rims.The new PST Pro Slip-on...

This is the Viper Scale Racing PST Slip-on Tires Tyco 440X2 Low Pro Fronts (S1 Compound) All New PST slip on tires designed specifically for the TYCO 440X2 wide pan as a performance stock replacement front tire.The new PST Pro Slip-on Tires are available...

This is the Viper Scale Racing PST Slip-on Tires Tyco 440X2 Low Pro Fronts (M1 Compound) All New PST slip on tires designed specifically for the TYCO 440X2 wide pan as a performance replacement front tire when using polymer magnets . The new PST Pro...